The balanced equation for the conversion of glucose to ethanol and carbon dioxide by fermentation is C6H12O6 → 2 C2H5OH + 2 CO2. In words, one molecule of glucose (a six-carbon sugar) is broken down into two molecules of ethanol (each with two carbons) and two molecules of carbon dioxide. This reaction is anaerobic, meaning it occurs without oxygen, and is carried out by yeast and some bacteria.
Formula
The stoichiometric calculation uses the molar masses of the reactants and products. The molar mass of glucose (C6H12O6) is 180.16 g/mol, ethanol (C2H5OH) is 46.07 g/mol, and carbon dioxide (CO2) is 44.01 g/mol. For every 1 mole of glucose consumed, the reaction produces 2 moles of ethanol and 2 moles of carbon dioxide.
Mass of ethanol produced = (mass of glucose / 180.16) × 2 × 46.07 g
Mass of carbon dioxide produced = (mass of glucose / 180.16) × 2 × 44.01 g
Worked Example
Suppose you start with 180.16 g of glucose (exactly 1 mole). Using the equation:
- Moles of glucose = 180.16 g / 180.16 g/mol = 1.000 mol
- Moles of ethanol = 2 × 1.000 = 2.000 mol
- Mass of ethanol = 2.000 mol × 46.07 g/mol = 92.14 g
- Moles of CO2 = 2 × 1.000 = 2.000 mol
- Mass of CO2 = 2.000 mol × 44.01 g/mol = 88.02 g
The calculator gives 92.14 g of ethanol and 88.02 g of carbon dioxide, matching the manual calculation.
Assumptions
- The reaction goes to completion (100% conversion).
- Glucose is the only carbon source; no other sugars are present.
- The yeast or microorganism uses the Embden–Meyerhof–Parnas (glycolysis) pathway followed by alcoholic fermentation.
- No side reactions (e.g., glycerol or acetic acid production) occur.
- Molar masses are based on standard atomic weights (H 1.008, C 12.011, O 15.999).
Background: Why This Reaction Matters
Alcoholic fermentation is one of the oldest biochemical processes harnessed by humans, used for brewing beer, making wine, and producing fuel ethanol. The overall reaction was first described in the 19th century, and it is the basis for the bioethanol industry, where glucose from corn starch or sugarcane is fermented on a massive scale. Beyond beverages, ethanol is a renewable fuel additive and an industrial solvent. Understanding the stoichiometry allows brewers and biofuel engineers to predict yields and design efficient processes.
How Fermentation Actually Works
The conversion of glucose to ethanol is not a single step but a sequence of enzyme-catalyzed reactions. First, glucose is phosphorylated and split into two molecules of glyceraldehyde-3-phosphate via glycolysis. Each triose is then converted to pyruvate, generating ATP and NADH. Under anaerobic conditions, pyruvate is decarboxylated to acetaldehyde by pyruvate decarboxylase, releasing CO2. Finally, acetaldehyde is reduced to ethanol by alcohol dehydrogenase, regenerating NAD+. The net reaction is:
C6H12O6 + 2 ADP + 2 Pi → 2 C2H5OH + 2 CO2 + 2 ATP + 2 H2O
Note that water appears in the balanced biochemical equation, but the simple net equation omits it because it cancels out in the overall stoichiometry.
Factors Affecting Yield
Real-world fermentation rarely achieves the theoretical 100% yield. Key factors include:
- Yeast strain: Different strains tolerate different ethanol concentrations and temperatures.
- Temperature: Optimal range is typically 25–35 °C; too high kills yeast, too low slows metabolism.
- pH: Most yeast prefer slightly acidic conditions (pH 4–5).
- Nutrient availability: Nitrogen, phosphorus, and trace minerals are needed for yeast growth.
- Oxygen: The process must be anaerobic; oxygen shifts metabolism toward respiration, producing water and CO2 instead of ethanol.
- Ethanol toxicity: As ethanol accumulates, it inhibits yeast, typically above 10–15% by volume.
Common Misconceptions
A frequent mistake is assuming that the mass of ethanol plus carbon dioxide equals the mass of glucose. In fact, the total mass is conserved: 180.16 g glucose → 92.14 g ethanol + 88.02 g CO2 = 180.16 g. Another misconception is that fermentation produces water as a major product; while water is involved in the biochemical pathway, the net equation for ethanol production does not include water as a product. Also, some think that oxygen is required; it is actually inhibitory to fermentation because yeast will preferentially respire aerobically.
Practical Applications and Limitations
The stoichiometric equation is used to calculate the maximum possible ethanol yield from a given sugar mass. For example, in biofuel production, a typical corn-to-ethanol process yields about 2.5 gallons of ethanol per bushel of corn (56 lb), which corresponds to roughly 90% of the theoretical yield. In brewing, the equation helps estimate the alcohol content of beer from the original and final specific gravities. However, the equation assumes pure glucose; most industrial feedstocks contain starch or sucrose that must be hydrolyzed first. Additionally, the reaction is exothermic, releasing about 67 kJ per mole of glucose, which must be managed in large-scale fermenters.
Safety and Handling
When performing fermentation experiments, follow your lab method, the safety data sheet (SDS) and your supervisor. Ethanol is flammable and should be kept away from open flames. Carbon dioxide is produced, so ensure adequate ventilation to avoid asphyxiation in enclosed spaces. Always use food-grade or reagent-grade glucose for consumable products, and never taste or ingest laboratory samples.
Frequently Asked Questions
What is the balanced equation for glucose to ethanol?
The balanced chemical equation is C6H12O6 → 2 C2H5OH + 2 CO2. It shows that one glucose molecule yields two ethanol molecules and two carbon dioxide molecules.
How much ethanol can be produced from 1 kg of glucose?
Using the molar masses, 1 kg (1000 g) of glucose produces (1000 / 180.16) × 2 × 46.07 = 511.4 g of ethanol. In volume, at a density of 0.789 g/mL, that is about 648 mL of pure ethanol.
Does fermentation produce water?
In the overall net equation, water does not appear as a product. However, the biochemical pathway involves water as a reactant in some steps, but it is regenerated, so the net equation excludes it.
Why is the yield less than 100%?
Real fermentations lose some glucose to yeast biomass, glycerol, and other by-products. Also, ethanol evaporation and incomplete conversion reduce yield. Industrial processes often achieve 90–95% of the theoretical maximum.
Can other sugars be used?
Yes, yeast can ferment glucose, fructose, and sucrose. Sucrose is a disaccharide of glucose and fructose; it is hydrolyzed by invertase before fermentation. Starch must be broken down into glucose first, which is why grains are malted or treated with enzymes.
Related
Formula used
in m | Mass of glucose | g | 180.16 | 0 out eth | Ethanol produced (mass) | g | m * (2 * 46.07 / 180.16) | 2 out co2 | Carbon dioxide produced (mass) | g | m * (2 * 44.01 / 180.16) | 2 out mol_glu | Glucose amount | mol | m / 180.16 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Convert ug/l to ppb Calculator
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works