molecalculator

Moles & Molar Mass

Half Life & Radioactive Decay Explained

Calculator No. 01-7635 · Updated · Formula and assumptions shown below

Remaining amount 0.9921 g
Fraction remaining
0.0992
= 0.5^(Elapsed time ÷ Half-life)
Activity (if n0 is atoms)
0.23 Bq
= Initial amount × 0.693 ÷ Half-life
Initial amount
10 g
Set in the form below
You enter
Initial amount (g), Elapsed time (s), Half-life (s)
You get
Remaining amount (g), Fraction remaining, Activity (if n0 is atoms) (Bq)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Half-life is the time it takes for half of the radioactive atoms in a sample to decay, and radioactive decay is the random, spontaneous process by which an unstable nucleus loses energy by emitting radiation. This page explains the concept, the mathematics, and how to calculate remaining activity or mass using the decay equation.

Formula

The decay equation is:

N(t) = N₀ × (1/2)^(t / t₁/₂)

where:

  • N(t) = amount remaining after time t (g, mol, or number of atoms)
  • N₀ = initial amount (same unit as N(t))
  • t = elapsed time (s, min, h, etc.)
  • t₁/₂ = half-life (same time unit as t)

The exponent t/t₁/₂ counts the number of half-lives that have passed. For example, if two half-lives have passed, the fraction remaining is (1/2)² = 1/4.

Activity (decays per second, in becquerels) is related to the number of atoms N and the half-life by:

A = λN, with λ = ln(2) / t₁/₂ = 0.693 / t₁/₂

Here λ is the decay constant (s⁻¹), and t₁/₂ must be in seconds to get activity in becquerels (Bq).

Worked Example

Using the calculator defaults: initial amount N₀ = 10 g, half-life t₁/₂ = 30 s, and elapsed time t = 100 s.

Step 1: Compute the number of half-lives: t / t₁/₂ = 100 / 30 = 3.3333.

Step 2: Raise 0.5 to that power: 0.5^3.3333 = e^(3.3333 × ln(0.5)) = e^(3.3333 × -0.693147) = e^(-2.3105) ≈ 0.099213.

Step 3: Multiply by the initial amount: 10 g × 0.099213 ≈ 0.9921 g.

The calculator shows 0.9921 g (rounded to 4 decimals) and a fraction remaining of 0.0992.

If N₀ were the number of atoms (e.g., 10 atoms), the activity would be 10 × 0.693 / 30 = 0.231 Bq.

Assumptions

  • The decay follows a simple exponential law (no chain decay or branching).
  • The half-life is constant – it does not change with temperature, pressure, or chemical state (except for electron-capture nuclides in extreme conditions).
  • No new atoms of the isotope are being produced (e.g., no nuclear reaction feeding the sample).

What Radioactive Decay Actually Is

Radioactive decay is a nuclear process, not a chemical one. It happens when the nucleus of an atom has an unstable combination of protons and neutrons. To become more stable, the nucleus emits particles or energy. The main types are:

  • Alpha decay – the nucleus ejects a helium-4 nucleus (2 protons, 2 neutrons). This reduces the atomic number by 2 and mass number by 4. Alpha particles are heavy and are stopped by a sheet of paper.
  • Beta decay – a neutron converts into a proton, emitting an electron (beta-minus) and an antineutrino, or a proton converts into a neutron, emitting a positron (beta-plus) and a neutrino. The atomic number changes by ±1, mass number stays the same. Beta particles can penetrate paper but are stopped by a few mm of aluminum.
  • Gamma decay – the nucleus releases excess energy as high-energy photons (gamma rays) without changing the number of protons or neutrons. Gamma rays are very penetrating and require thick lead or concrete to stop.

Each decay event is random – you cannot predict when a particular nucleus will decay. But for a large number of atoms, the decay rate is statistically predictable, giving the smooth exponential curve.

Why Half-Life Is Useful

Half-life is a convenient measure because it is independent of the sample size. Whether you have 1 gram or 1 kilogram, the fraction that decays in one half-life is the same (50%). This makes it easy to compare different isotopes and to calculate how long a sample will remain radioactive.

For example, iodine-131 has a half-life of 8.02 days, used in medical treatments; carbon-14 has a half-life of 5,730 years, used for dating archaeological samples; uranium-238 has a half-life of 4.468 billion years, used to date the age of the Earth. The wide range – from fractions of a second to billions of years – reflects the huge variety of nuclear stability.

Common Mistakes and Misconceptions

  • Mixing time units: If half-life is in years and elapsed time is in days, you must convert one to the other before dividing. The calculator requires both in the same unit.
  • Thinking half-life means “half is gone” after the first half-life and “all gone” after two: After two half-lives, 1/4 remains; after three, 1/8; it never reaches zero mathematically. In practice, the amount becomes negligible after about 10 half-lives (0.1% remains).
  • Confusing activity with amount: Activity (Bq) is the number of decays per second, which is proportional to the number of atoms. The same equation applies to activity: A(t) = A₀ × (1/2)^(t/t₁/₂).
  • Using the wrong decay constant: λ = ln(2)/t₁/₂, not 1/t₁/₂. The average lifetime is 1/λ = t₁/₂ / ln(2) ≈ 1.443 × t₁/₂.

Applications and Real-World Context

Half-life calculations are used in many fields:

  • Radiometric dating: Carbon-14 dating compares the remaining ¹⁴C to stable ¹²C to estimate the age of organic material up to about 50,000 years.
  • Nuclear medicine: Doctors choose isotopes with half-lives long enough to image or treat but short enough to clear from the body. Technetium-99m (t₁/₂ = 6.0 h) is common for imaging.
  • Nuclear waste management: Knowing the half-life tells how long spent fuel must be stored. Cesium-137 (30.2 y) and strontium-90 (28.8 y) require ~300 years to decay to safe levels, while plutonium-239 (24,100 y) needs hundreds of thousands of years.
  • Radiation safety: After a nuclear accident, authorities use half-lives to predict when an area can be reoccupied. Iodine-131 decays quickly, but cesium-137 persists.

Limits of the Simple Equation

The equation N(t) = N₀(1/2)^(t/t₁/₂) assumes a single decay path. Real situations can be more complex:

  • Decay chains: A parent nuclide decays into a daughter that is also radioactive. The daughter’s amount initially grows, then decays. The simple equation only describes the parent.
  • Branching decay: Some nuclides decay by two paths simultaneously (e.g., potassium-40 decays by both beta-minus and electron capture). The effective half-life combines both branches.
  • Secular equilibrium: In a long chain, the daughter’s activity equals the parent’s after many half-lives – a situation that requires more advanced equations.

For most introductory calculations, the simple exponential decay is sufficient.

Frequently Asked Questions

What is the difference between half-life and decay constant?

Half-life (t₁/₂) is the time for half the atoms to decay; decay constant (λ) is the probability per unit time that an atom decays. They are inversely related: λ = ln(2)/t₁/₂. A short half-life means a large decay constant and rapid decay.

How do I calculate the age of a sample using half-life?

If you know the initial amount N₀ and the current amount N, rearrange the decay equation to solve for t: t = t₁/₂ × log₂(N₀/N). For carbon-14, N₀ is the assumed initial ¹⁴C level in living organisms, and N is measured in the sample. The result is the time since the organism died.

Does temperature or pressure affect half-life?

For most radioactive decay, no. The nuclear forces are far stronger than chemical or thermal energies, so half-lives are constant under ordinary conditions. Extreme pressures or ionization can slightly affect electron-capture decay, but for practical purposes, half-life is a fixed property of the isotope.

What does it mean if a sample has a half-life of 1 hour?

It means that after 1 hour, half of the original radioactive atoms have decayed. After 2 hours, half of the remaining half has decayed, leaving 1/4 of the original. After 3 hours, 1/8 remains, and so on. The sample never completely disappears, but it becomes undetectable after many half-lives.

Can I use the same formula for activity and mass?

Yes. Activity (Bq) is proportional to the number of atoms, so it decays with the same half-life. If you have an initial activity A₀, the activity after time t is A₀ × (1/2)^(t/t₁/₂). The mass also follows the same exponential decay, provided no new atoms are added.

Why is the half-life of carbon-14 so important?

Carbon-14 is continuously formed in the atmosphere by cosmic rays and taken up by living organisms. When an organism dies, it stops taking in new carbon-14, and the existing ¹⁴C decays with a half-life of 5,730 years. By measuring the remaining ¹⁴C, scientists can date organic materials up to about 50,000 years old, which is crucial for archaeology and geology.

When working with radioactive materials in a lab, always follow your lab method, the safety data sheet (SDS), and your supervisor. This calculator is for educational and planning purposes only.

Related

Formula used
in n0 | Initial amount | g | 10 | 0
in t | Elapsed time | s | 100 | 0
in hl | Half-life | s | 30 | 0.000001
out rem | Remaining amount | g | n0 * 0.5^(t / hl) | 4
out frac | Fraction remaining | - | 0.5^(t / hl) | 4
out act | Activity (if n0 is atoms) | Bq | n0 * 0.693 / hl | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →