molecalculator

Moles & Molar Mass

Half Life Graph: How to Read & Calculate

Calculator No. 01-7680 · Updated · Formula and assumptions shown below

Remaining amount 12.50 g
Fraction remaining
0.125
= (0.5)^(Total time elapsed ÷ Half-life)
Initial amount
100 g
Set in the form below
Half-life
5 hours
Set in the form below
You enter
Initial amount (g), Half-life (hours), Total time elapsed (hours)
You get
Remaining amount (g), Fraction remaining
Rounding
2 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A half-life graph shows how a quantity decays over time, plotting the remaining amount against elapsed time to reveal the characteristic exponential decay curve. To read one, find the time it takes for the starting value to drop to half its original amount—that interval is the half-life, and it stays constant no matter where you start on the curve. This guide explains how to interpret these graphs, calculate half-life from data, and avoid common mistakes.

Formula

The exponential decay equation that underlies every half-life graph is:

N(t) = N₀ × (1/2)^(t / t½)

  • N(t) = amount remaining after time t
  • N₀ = initial amount at t = 0
  • t = total elapsed time
  • t½ = half-life (the time for one half to decay)

The exponent t / t½ tells you how many half-lives have passed. If two half-lives pass, the fraction left is (1/2)² = 1/4, and so on.

Worked Example

Using the calculator defaults: start with 100 g of a substance with a half-life of 5 hours, and let 15 hours elapse.

  1. Number of half-lives = 15 / 5 = 3
  2. Fraction remaining = (1/2)³ = 1/8 = 0.125
  3. Remaining amount = 100 g × 0.125 = 12.5 g

So after 15 hours, 12.5 g remains. The calculator gives the same: 100 × (0.5)^(15/5) = 100 × 0.125 = 12.5 g.

Assumptions

  • The decay follows first-order kinetics (rate proportional to amount present).
  • The half-life is constant—it does not depend on temperature, pressure, or how much material is present.
  • No new material is added or removed during the time interval.

How to Read a Half-Life Graph

On a standard half-life graph, the y-axis shows the remaining quantity (mass, activity, concentration) and the x-axis shows time. The curve starts at the initial amount and falls rapidly at first, then levels off asymptotically toward zero—it never quite reaches zero mathematically.

To find the half-life from the graph:

  1. Locate the initial amount at t = 0 (say, 100%).
  2. Draw a horizontal line at half that value (50%).
  3. Where that line meets the curve, drop a vertical line to the time axis—that time is one half-life.
  4. Repeat from 50% to 25% to confirm the same time interval.

Because the half-life is constant, the time between 100%→50%, 50%→25%, and 25%→12.5% is always identical. This constant interval is what makes the graph instantly recognizable as exponential decay.

Common Mistakes When Interpreting

  • Confusing half-life with the time to decay completely: A substance never fully disappears in a mathematical sense; after 10 half-lives, about 0.1% remains, which is often treated as negligible but not zero.
  • Using a linear scale for a log plot: Some graphs use a logarithmic y-axis, which makes the decay curve a straight line. The half-life is then the time for the line to drop by a factor of 2 on the log scale, not the slope.
  • Mixing up units: If the half-life is in hours and the elapsed time is in days, convert everything to the same unit before calculating.
  • Assuming half-life changes with amount: For first-order decay, half-life is independent of the starting quantity. If you start with 200 g instead of 100 g, the time to reach half is still the same.

Real-World Applications

Half-life graphs appear in many fields:

  • Radiometric dating: Carbon-14 has a half-life of about 5,730 years. By measuring the remaining fraction of carbon-14 in a sample, scientists estimate its age using the same graph.
  • Nuclear medicine: Iodine-131 (half-life ≈ 8 days) is used for thyroid treatment; the graph helps plan dosage and predict how long it stays in the body.
  • Pharmacokinetics: Drug elimination from the body often follows first-order kinetics, so the half-life tells how often a medication needs to be taken.
  • Environmental science: Pesticides and pollutants degrade with known half-lives, allowing predictions of how long they persist in soil or water.

Graphing Tips for Students

When plotting your own half-life data, use these best practices:

  • Always label axes with quantity and time, including units.
  • Plot enough points—at least 5 to 7—to see the curve shape clearly.
  • Use a smooth curve or exponential best-fit line, not straight segments between points.
  • If your data is noisy, plot the natural log of the quantity versus time; a straight line confirms first-order decay, and the slope equals -λ (decay constant), where t½ = ln(2)/λ.

Frequently Asked Questions

What does a half-life graph look like?

It’s a smooth, downward-curving line that drops steeply at first and then flattens out, approaching zero but never touching it. The y-axis is the remaining amount, and the x-axis is time.

How do I find half-life from a graph?

Pick any point on the curve, note its value, then find the time when the value is half of that. The difference in time is the half-life. For best accuracy, do this at two different starting points and average.

Is half-life always the same for a given substance?

Yes, for first-order processes like radioactive decay, the half-life is a constant physical property. It does not change with temperature, pressure, or the amount of substance.

What is the difference between half-life and decay constant?

The decay constant (λ) is the probability per unit time that a nucleus decays, while half-life is the time for half the sample to decay. They are related by t½ = ln(2)/λ ≈ 0.693/λ.

Can a half-life graph be a straight line?

On a linear scale, no—it’s curved. But if you plot the logarithm of the remaining amount against time, the result is a straight line for first-order decay. That log plot is often used to verify the decay is truly exponential.

Why does the graph never reach zero?

Because exponential decay approaches zero asymptotically: after each half-life, half of what remains disappears, so you always have a tiny fraction left. In practice, after about 10 half-lives, the remaining amount is less than 0.1% and often undetectable.

Safety and Scope Note

This calculator and explanation are for educational and study purposes only. If you are working with radioactive materials, pharmaceuticals, or hazardous chemicals in a laboratory, always follow your lab’s safety protocols, the material’s safety data sheet (SDS), and your supervisor’s instructions.

Related

Formula used
in n | Initial amount | g | 100 | 0
in t | Half-life | hours | 5 | 0.001
in h | Total time elapsed | hours | 15 | 0
out rem | Remaining amount | g | n * (0.5)^(h / t) | 2
out frac | Fraction remaining | - | (0.5)^(h / t) | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →