Half-life is the time required for half of the atoms in a radioactive sample to decay. You enter the initial quantity and the half-life (or decay constant), and this calculator returns the remaining quantity after a specified time. The result is the amount of the original radioactive isotope still present, expressed in the same unit you entered.
Formula
The fundamental equation for radioactive decay is:
N(t) = N₀ × (1/2)^(t / t½)
where:
- N(t) = remaining quantity after time t (same unit as N₀)
- N₀ = initial quantity (g, mg, kg, or number of atoms)
- t = elapsed time (seconds, minutes, hours, years – must match the half-life unit)
- t½ = half-life (same time unit as t)
Equivalent form using the decay constant λ (lambda):
N(t) = N₀ × e^(−λt), with λ = ln(2) / t½ ≈ 0.693 / t½
The calculator uses the first form directly. No unit conversion is needed as long as t and t½ are in the same time unit.
Worked Example
Using the default values: initial amount = 10 g, elapsed time = 100 s, half-life = 30 s.
- Calculate the exponent: t / t½ = 100 / 30 = 3.3333
- Raise 0.5 to that power: 0.5^3.3333 = 0.099213
- Multiply by initial amount: 10 × 0.099213 = 0.99213 g
So after 100 seconds, about 0.9921 g of the original 10 g remains. The fraction remaining is 0.0992 (9.92%). This matches the calculator output.
Assumptions
- The decay follows first-order kinetics – the probability of decay per atom per unit time is constant.
- The half-life is independent of temperature, pressure, chemical state, or physical form (true for most nuclear decays).
- No new atoms of the isotope are being produced during the period considered.
- The sample is large enough that statistical fluctuations are negligible.
Why Half-Life Matters in Physics
Half-life is the single most useful number for describing radioactive decay because it is intuitive and does not depend on the sample size. A large sample and a small sample of the same isotope have the same half-life. This property allows physicists to:
- Date ancient artifacts and geological formations (carbon-14, uranium-lead dating)
- Calculate radiation doses in medicine and industry
- Determine safe storage times for nuclear waste
- Predict the activity of a radioactive source over time
- Identify isotopes by their characteristic decay rates
For example, iodine-131 has a half-life of about 8 days, used in thyroid therapy. Cesium-137 has a half-life of 30 years, a common fission product. Uranium-238 has a half-life of 4.5 billion years, used to date the Earth.
How to Read the Result
The remaining amount tells you exactly how much of the original isotope is left, but it does not tell you the total radioactivity. Activity (measured in becquerels, Bq, or curies) is the number of decays per second. Activity also halves every half-life, so the same curve applies. If you need activity, multiply the remaining number of atoms by the decay constant λ.
After one half-life, 50% remains; after two, 25%; after three, 12.5%. After 10 half-lives, less than 0.1% remains – often considered “effectively gone” for many practical purposes, though the decay continues forever mathematically.
Common Mistakes and Misconceptions
The most frequent error is mixing time units – using seconds for elapsed time and hours for half-life. Always convert so both are the same. Another mistake is thinking half-life means “the time until the sample is completely gone.” It never completely disappears; it just keeps halving.
A common misconception is that half-life depends on the amount of material. It does not – it is a fixed property of the isotope. Also, half-life is not the same as “average lifetime” (mean life). The mean life τ = t½ / ln(2) ≈ 1.443 × t½. Many people confuse the two when reading about decay.
Finally, do not confuse half-life with “biological half-life” (how long a substance takes to leave the body) or “effective half-life” (combined physical and biological clearance). Those are different concepts used in medicine.
Limits of the Formula
The simple exponential decay formula assumes a closed system with no production of the isotope. In nuclear reactors or medical isotope generators, the isotope is being produced while it decays, so the net change follows a more complex equation (production minus decay). Also, for extremely small samples (a few atoms), the statistical nature of decay becomes apparent – the formula gives the average behavior, not a guarantee for an individual atom.
The formula also assumes the half-life is constant. For most nuclear decays this is true to extraordinary precision, but some exotic decay modes (like bound-state beta decay) can be affected by the chemical environment. For everyday physics and chemistry, the constant half-life assumption holds.
Frequently Asked Questions
What is the difference between half-life and decay constant?
The decay constant λ is the probability per unit time that a single atom will decay. Half-life is the time for half the sample to decay. They are inversely related: t½ = ln(2)/λ. A larger decay constant means a shorter half-life and faster decay.
Can half-life be used for non-radioactive processes?
Yes, any first-order process has a half-life. Chemical reactions that are first-order (like some drug metabolism or decomposition reactions) have half-lives. The same formula applies, but the “decay” is the disappearance of a reactant. However, in physics, “half-life” almost always refers to nuclear decay.
How do scientists measure very long half-lives?
For half-lives of millions or billions of years, you cannot wait to see half the sample decay. Instead, scientists measure the activity (decays per second) of a known number of atoms and use λ = activity / N, then t½ = ln(2)/λ. This works because even a tiny fraction of decays per year is measurable.
What is carbon-14 dating and how does half-life work there?
Carbon-14 has a half-life of about 5,730 years. Living organisms maintain a constant ratio of carbon-14 to carbon-12. When they die, the carbon-14 decays without being replaced. By measuring the remaining ratio, scientists calculate how many half-lives have passed, giving the age of the organic material. After about 50,000 years, too little carbon-14 remains for reliable dating.
Does temperature or pressure affect half-life?
For most nuclear decays, no. The strong and weak nuclear forces that govern decay are unaffected by ordinary temperature, pressure, or chemical bonding. However, electron capture decay can be slightly affected by the electron density near the nucleus, which changes with chemical state. These effects are tiny (fractions of a percent) and are negligible for most practical purposes.
What does “half-life” mean for a single atom?
For a single atom, half-life is not a prediction of when it will decay – it is a probability. An atom has a 50% chance of decaying within one half-life, a 75% chance within two, and so on. The formula describes the behavior of large populations, not individual atoms.
Related
Formula used
in m | Initial amount | g | 10 | 0 in t | Elapsed time | s | 100 | 0 in hl | Half-life | s | 30 | 0.000000000000000001 out rem | Remaining amount | g | m * 0.5^(t / hl) | 4 out frac | Fraction remaining | - | 0.5^(t / hl) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check