The player character in Half-Life, Gordon Freeman, can jump exactly 45 units high in the game’s engine, which translates to about 1.125 meters (3.7 feet) from a standstill. This value is determined by the GoldSrc engine’s physics code, where 1 unit equals 1 inch, and it applies to all human-sized characters in the game, including Barney and the HECU marines.
Formula
The jump height in meters is simply the engine’s unit value divided by the unit-to-meter conversion factor:
Height (m) = Jump height (units) ÷ Units per meter
Where:
- Jump height (units) = the vertical distance the engine applies to the player’s origin when jumping (default 45 for GoldSrc).
- Units per meter = the engine’s world scale. GoldSrc and Source use 1 unit = 1 inch, so 1 meter = 39.37 units, but for gameplay math, 40 units per meter is a common approximation.
For the default values: 45 units ÷ 40 units/m = 1.125 m. In feet, that is 1.125 × 3.28084 = 3.69 ft.
Worked Example
Using the calculator defaults, Gordon’s jump height is 45 units. To convert to meters:
- Divide by the units per meter: 45 ÷ 40 = 1.125 m.
- Convert to feet: 1.125 × 3.28084 = 3.69 ft.
So the calculator returns 1.125 meters (3.69 feet) for a standard jump. This matches the in-game feel: Gordon can barely clear a waist-high crate, and can reach ledges that are about chest-high.
Assumptions
- The jump is from a standstill (no sprint or crouch-jump boost).
- The game uses the GoldSrc engine’s default gravity and jump impulse.
- 1 unit = 1 inch is the engine’s internal scale, which is standard for GoldSrc and Source.
- The player character is a standard human-sized hitbox (about 72 units tall).
How the GoldSrc Engine Calculates Jump Height
In the GoldSrc engine (used by Half-Life and its mods like Counter-Strike 1.6), the jump height is not a hardcoded number but a result of physics. The engine applies an upward velocity (the “jump impulse”) of 268 units per second, and gravity pulls the player down at 800 units per second squared. The maximum height reached is given by the kinematic equation:
h = v² / (2g)
Plugging in the values: h = 268² / (2 × 800) = 71824 / 1600 = 44.89 units, which rounds to 45 units. This is why the jump height is consistently 45 units regardless of the player’s horizontal speed (unless using a crouch-jump or strafe-jump exploit, which can extend horizontal distance but not vertical height).
Why Jump Height Matters in Half-Life
Level designers use the 45-unit jump height to create obstacles that require careful platforming. For example:
- A crate that is 44 units high can be climbed by jumping, but a 46-unit crate cannot be climbed without a boost.
- Ledges that are exactly 45 units high are the maximum reachable from flat ground, forcing players to find alternative routes or use physics objects.
- In the famous “Blast Pit” chapter, you must jump across gaps that are wider than your horizontal jump range, but the vertical height is rarely a limiting factor.
Understanding the exact jump height helps speedrunners and modders create custom maps with fair, beatable geometry.
Comparing to Real Humans and Other Games
A real-world human with a standing vertical jump of about 0.5 meters (20 inches) would be considered athletic. Gordon’s 1.125-meter standing jump is more than double that, which fits the game’s action-hero fantasy. In comparison:
- In Quake (id Tech 2), the player jumps about 48 units high, with a similar unit scale, making it slightly higher.
- In Source engine games (Half-Life 2), the jump height is also 45 units, but the physics feel different due to changed acceleration and air control.
- In Unreal Tournament, the default jump height is about 52 units (with 1 unit ≈ 1.5 cm), which is roughly 0.78 meters—lower than Half-Life’s.
So Gordon is actually a high jumper by video game standards, but not the highest.
Common Misconceptions: Crouch-Jumping and Sprint
Many players believe that crouch-jumping (pressing crouch while in the air) increases jump height. In GoldSrc, crouch-jumping does not increase vertical height—it only allows you to fit into tighter spaces mid-air. The engine’s jump impulse is the same whether you crouch or not. Similarly, sprinting (which doesn’t exist in the original Half-Life, only in mods) does not increase vertical jump height; it only increases horizontal speed, which can help you cross wider gaps but not reach higher ledges.
Another misconception is that the player can jump higher by looking up. In GoldSrc, the jump direction is always straight up relative to the world, not the camera. So looking up or down has no effect on jump height.
How to Use This in Modding or Speedrunning
If you are making a custom map or a speedrun route, you can use the 45-unit value to plan jumps:
- To test if a ledge is reachable, place a brush that is 45 units high and try to jump onto it from flat ground.
- For a jump that requires a running start, the horizontal distance is about 130 units (the maximum jump distance is roughly 130 units with a sprint and strafe technique), so combine that with the vertical height.
- Remember that the player’s eye height is 36 units above the origin, so a 45-unit jump means the eyes reach 81 units total—enough to see over most obstacles.
Speedrunners often use “bunny hopping” to maintain horizontal speed, but the vertical jump height remains constant at 45 units, so they still need to find the same ledges.
Frequently Asked Questions
Can Gordon jump higher with the long jump module?
No. The long jump module in Half-Life (and Opposing Force) increases horizontal speed by allowing a super-sprint, but the vertical jump height when using it is still 45 units. The module gives a longer horizontal jump, not a higher one.
Does the player jump higher in Half-Life 2?
No, the Source engine also uses a 45-unit jump height for the player. However, the physics of air control and gravity feel different, so jumps may feel slightly different, but the maximum height is the same.
Why does Gordon jump so high compared to a real human?
Game designers intentionally exaggerate jump height to make platforming more forgiving and fun. A 1.125-meter standing jump is about 2.5 times the average human’s vertical leap, but it allows players to traverse environments without needing ladders everywhere.
Is there any way to increase jump height in the game?
In the base game, no. But in mods or with console commands, you can change the gravity (sv_gravity) or the jump impulse (sv_jump_impulse) to make jumps higher or lower. For example, setting sv_gravity to 400 (half of default) makes jumps about twice as high.
Does the player’s health or armor affect jump height?
No. Jump height is purely a function of the engine’s physics constants and is not affected by health, armor, or any other player attribute. Even when Gordon is at 1 health, he can jump the same height as when fully healthy.
How many units is a typical crate in Half-Life?
Standard crates in Half-Life are 32×32×32 units, which is about 0.8 meters (2.6 feet) on each side. This means you can easily jump on top of a single crate (32 units high), but stacking two crates (64 units) requires a boost or a jump from a higher surface.
Related
Formula used
in m | Jump height in units | - | 45 | 0 | 1024 in m | Units per meter (GoldSrc) | - | 40 | 1 | 1000 out m | Jump height in meters | m | u / upm | 3 out f | Jump height in feet | ft | (u / upm) * 3.28084 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check