Half-life (t1/2) is the time required for a quantity to reduce to half its initial value. This calculator computes the half-life of a first-order reaction from the rate constant, or the rate constant from the half-life, and also finds the remaining amount after a given time. Enter any two of the three values (rate constant, initial amount, elapsed time) and the calculator returns the half-life and the fraction remaining.
Formula
For a first-order reaction, the half-life is given by:
t1/2 = ln(2) / k
where:
- t1/2 = half-life (seconds, minutes, hours, etc., matching the units of k)
- k = first-order rate constant (units of 1/time, e.g., s-1, min-1)
- ln(2) ≈ 0.693147
The amount remaining after time t follows the integrated rate law:
N(t) = N0 e-kt
where N0 is the initial amount and e is Euler’s number (≈ 2.71828).
Worked Example
Using the default values: k = 0.001 s-1, N0 = 1 mol, t = 100 s.
Step 1: Calculate the half-life.
t1/2 = ln(2) / k = 0.693147 / 0.001 s-1 = 693.15 s
Step 2: Calculate the remaining amount after 100 s.
N(100) = 1 mol × e-(0.001 × 100) = 1 × e-0.1 ≈ 1 × 0.90484 = 0.9048 mol
Step 3: Fraction remaining = 0.9048 / 1 = 0.9048 (or 90.48%).
The calculator shows t1/2 = 693.15 s and remaining amount = 0.9048 mol, matching these results.
Assumptions
- The reaction follows first-order kinetics: rate = k[A].
- The rate constant k is constant over time (temperature and pressure are constant).
- No reverse reaction or side reactions are considered.
- The system is closed (no mass exchange).
What Is Half-Life in Kinetics?
Half-life is a convenient measure of how fast a reaction proceeds. For a first-order reaction, the half-life is independent of the initial concentration—this is a hallmark of first-order kinetics. In contrast, for zero-order reactions, the half-life depends on the initial concentration (t1/2 = [A]0 / (2k)), and for second-order reactions, it also depends on the initial concentration (t1/2 = 1 / (k[A]0)).
First-order kinetics are common in radioactive decay, many drug elimination processes, and some chemical reactions (e.g., decomposition of hydrogen peroxide, certain hydrolysis reactions). Because the half-life is constant, it is easy to predict how much material remains after any number of half-lives: after n half-lives, the fraction remaining is (1/2)n.
How to Use the Calculator
Enter the rate constant k in units of reciprocal time (e.g., s-1, min-1, hr-1). The half-life will be in the same time unit (if k is in min-1, t1/2 is in minutes). Enter the initial amount (any unit, e.g., mol, grams, or number of atoms) and the elapsed time (in the same time unit as k). The calculator outputs:
- Half-life (t1/2) – the time to reduce to half.
- Remaining amount – the amount left after the elapsed time.
- Fraction remaining – the proportion left (0 to 1).
If you know the half-life and want the rate constant, simply rearrange: k = ln(2) / t1/2. You can enter a half-life value into the k field by using the inverse (e.g., if t1/2 = 10 min, k = 0.0693 min-1).
Common Mistakes and Misconceptions
- Unit mismatch: If k is in s-1 and time is in minutes, the result will be wrong. Always convert time to match the rate constant’s unit.
- Confusing half-life with mean lifetime: For first-order decay, the mean lifetime τ = 1/k, and the half-life = τ × ln(2). They are not the same.
- Assuming half-life is constant for all orders: Only first-order reactions have a constant half-life independent of concentration.
- Rounding too early: Use at least 3 significant figures in ln(2) to avoid errors.
Real-World Applications
Half-life is used in many fields:
- Radiometric dating: Carbon-14 has a half-life of 5,730 years; uranium-238 has a half-life of 4.5 billion years.
- Pharmacokinetics: The elimination half-life of a drug determines dosing intervals (e.g., a drug with a half-life of 24 hours is often given once daily).
- Nuclear waste management: Knowing half-lives helps plan storage times.
- Chemical kinetics: Determining reaction order and rate constants.
Limitations of the Formula
The first-order half-life formula assumes the reaction is truly first-order and that the rate constant is constant. In reality, temperature changes, catalyst deactivation, or non-ideal behavior can cause deviations. For second-order or zero-order reactions, the half-life changes as the reaction proceeds, so this calculator is not applicable. Also, for reversible reactions, the observed half-life may not follow the simple formula.
Frequently Asked Questions
What is the half-life if k = 0.02 min⁻¹?
t1/2 = ln(2) / 0.02 min⁻¹ = 34.66 minutes. This means after 34.66 minutes, half of the reactant remains.
How do I find k from half-life?
Rearrange the formula: k = ln(2) / t1/2. For example, if the half-life is 10 minutes, k = 0.0693 min⁻¹.
Does half-life depend on concentration?
Only for first-order reactions, no. For zero-order and second-order reactions, the half-life depends on the initial concentration. This calculator is for first-order only.
What is the difference between half-life and mean lifetime?
Mean lifetime (τ) is the average time a molecule survives before decaying. For first-order decay, τ = 1/k, and t1/2 = τ × ln(2) ≈ 0.693τ. Half-life is the time to reduce to 50%, while mean lifetime is the time to reduce to 1/e (≈36.8%).
Can I use this for radioactive decay?
Yes, radioactive decay is a first-order process, so the same formula applies. The rate constant k is related to the decay constant λ, and the half-life is t1/2 = ln(2)/λ.
What if I have a second-order reaction?
For a second-order reaction, the half-life is t1/2 = 1 / (k[A]0). It depends on the initial concentration. This calculator is not suitable; you would need a different formula.
Safety and Scope
This calculator is for educational and lab-planning purposes only. When working with radioactive materials or hazardous chemicals, always follow your lab’s safety protocols, the safety data sheet (SDS), and your supervisor’s instructions. Do not use this tool for clinical dosing or medical treatment planning.
Related
Formula used
in k | Rate constant (k) | 1/s | 0.001 | 0 in n0 | Initial amount | mol | 1 | 0 in t | Elapsed time | s | 100 | 0 out t12 | Half-life | s | ln(2) / k | 2 out nt | Remaining amount | mol | n0 * exp(-k * t) | 4 out frac | Fraction remaining | - | exp(-k * t) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check