Half-life is the time it takes for half of the atoms in a radioactive sample to decay. This article explains what half-life means, how to calculate it, and why it matters in medicine, geology, and nuclear science.
Formula
The decay of a radioactive substance follows an exponential law: N(t) = N₀ × (0.5)^(t / t₁/₂), where:
- N(t) = amount remaining after time t (g, mol, or number of atoms)
- N₀ = initial amount (same unit as N(t))
- t = elapsed time (any time unit, as long as it matches the half-life unit)
- t₁/₂ = half-life (same time unit as t)
The exponent t / t₁/₂ counts how many half-lives have passed. Each half-life halves the remaining amount.
Worked Example
Suppose you start with 100 g of a radioactive isotope with a half-life of 5 hours. After 10 hours, how much remains?
- Number of half-lives = 10 h / 5 h = 2
- Remaining fraction = (0.5)^2 = 0.25
- Remaining amount = 100 g × 0.25 = 25 g
The calculator gives 25.0000 g, matching our manual calculation.
Assumptions
- Decay is a first-order process (the rate depends only on the number of radioactive nuclei).
- The half-life is constant and does not change with temperature, pressure, or chemical state.
- No new radioactive atoms are added or removed except by decay.
What Is Half-Life?
Half-life is a statistical measure. You cannot predict when a single nucleus will decay, but for a large sample, exactly half will decay after one half-life. After two half-lives, three-quarters have decayed, leaving one-quarter. After three half-lives, one-eighth remains, and so on.
Different isotopes have wildly different half-lives. For example, carbon-14 has a half-life of 5,730 years, while polonium-214 has a half-life of 164 microseconds. This range makes half-life a versatile tool for dating objects and designing medical treatments.
How to Calculate Half-Life from Data
If you know the initial amount, the remaining amount, and the elapsed time, you can solve for the half-life using the decay equation. Rearranging the formula gives:
t₁/₂ = t × ln(2) / ln(N₀ / N(t))
For example, if a sample drops from 80 g to 20 g in 6 hours, then N₀/N(t) = 4, ln(4) = 1.386, and t₁/₂ = 6 × 0.693 / 1.386 = 3 hours.
Half-Life vs. Mean Life
Half-life is often confused with mean life (also called average life). Mean life (τ) is the average time a nucleus survives before decaying. The relationship is τ = t₁/₂ / ln(2) ≈ 1.443 × t₁/₂. For carbon-14, the mean life is about 8,270 years. Mean life is used in some formulas, such as the decay constant λ = 1/τ.
Applications of Half-Life
- Radiocarbon dating: Carbon-14 half-life of 5,730 years is used to date organic materials up to about 50,000 years old.
- Medical imaging: Technetium-99m (half-life 6 hours) is used in diagnostic scans because it decays quickly, limiting radiation exposure.
- Cancer therapy: Iodine-131 (half-life 8 days) is used to treat thyroid cancer; its short half-life concentrates radiation in the thyroid.
- Nuclear waste management: Knowing half-lives helps plan storage times. For example, cesium-137 (30 years) needs hundreds of years to decay to safe levels.
- Geological dating: Uranium-238 (4.5 billion years) is used to date the age of the Earth and ancient rocks.
Common Mistakes and Limitations
- Mixing units: If half-life is in years but time is in days, convert first. Always use the same unit for both.
- Confusing half-life with decay constant: The decay constant λ = ln(2) / t₁/₂. They are not the same.
- Assuming linear decay: Decay is exponential, not linear. After two half-lives, 25% remains, not 0%.
- Using the wrong formula for multiple decay chains: The simple equation works only for a single isotope decaying into a stable product. If the daughter is also radioactive, the math is more complex.
Also note that half-life is a statistical average; for very small samples (a few atoms), the actual decay time can deviate significantly.
Frequently Asked Questions
What is the half-life of carbon-14?
Carbon-14 has a half-life of 5,730 ± 40 years. This means that if you start with 1 gram of carbon-14, after 5,730 years you will have 0.5 grams, after 11,460 years 0.25 grams, and so on.
How do you find the half-life from a graph?
Plot the amount of the substance versus time on a graph. Find the time at which the initial amount has dropped to half. That time is the half-life. You can also use a log-linear plot, where the decay becomes a straight line; the half-life is related to the slope.
Can half-life be changed?
For most radioactive isotopes, half-life is constant and unaffected by temperature, pressure, or chemical bonding. The only exception is electron capture, which can be slightly altered by the chemical environment, but the effect is minuscule (less than 1%).
What is the difference between half-life and radioactive dating?
Half-life is the physical constant that makes radioactive dating possible. Radioactive dating uses the measured ratio of parent to daughter isotopes and the known half-life to calculate the age of a sample. For example, carbon-14 dating uses the half-life to determine how many years have passed since an organism died.
Why is half-life important in nuclear waste?
Nuclear waste contains isotopes with different half-lives. Short-lived isotopes (like iodine-131, 8 days) decay quickly but are highly radioactive initially. Long-lived isotopes (like plutonium-239, 24,000 years) remain dangerous for millennia. Understanding half-lives helps engineers design storage containers and predict how long waste must be isolated.
How accurate is the half-life calculator?
The calculator uses the standard exponential decay formula, which is exact for a single isotope with a constant half-life. The accuracy of the result depends entirely on the accuracy of the half-life value you input. Published half-lives are known to high precision (e.g., carbon-14 is 5,730 ± 40 years), so the calculator is as accurate as the data you provide.
Related
Formula used
in n0 | Initial amount | g | 100 | 0 in t | Elapsed time | h | 10 | 0 in hl | Half-life | h | 5 | 0.000001 out rem | Remaining amount | g | n0 * (0.5) ^ (t / hl) | 4 out frac | Fraction remaining | - | (0.5) ^ (t / hl) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check