molecalculator

Moles & Molar Mass

Half Life λ: Decay Constant & Calculation

Calculator No. 01-8231 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The decay constant λ (lambda) is the probability per unit time that a radioactive nucleus will decay, and it is directly related to the half-life by the equation λ = ln(2) / t½. Enter the half-life (or the decay constant) and this calculator will convert between the two, giving you the other value instantly.

Formula

The relationship between half-life (t½) and decay constant (λ) is:

λ = ln(2) / t½

where:

  • λ = decay constant, in s⁻¹ (or any inverse time unit)
  • t½ = half-life, in seconds (or any time unit, as long as it matches λ)
  • ln(2) ≈ 0.693147

Equivalently, t½ = ln(2) / λ. This comes from the radioactive decay law N(t) = N₀ e^(−λt), where N₀ is the initial number of nuclei and N(t) is the number remaining after time t. Setting N(t) = N₀/2 gives t = ln(2)/λ.

Worked Example

Carbon-14 has a half-life of 5730 years. What is its decay constant in s⁻¹?

First convert years to seconds: 5730 yr × (365.25 days/yr) × (24 h/day) × (3600 s/h) = 1.808 × 10¹¹ s.

Then λ = ln(2) / (1.808 × 10¹¹ s) = 0.693147 / (1.808 × 10¹¹ s) = 3.83 × 10⁻¹² s⁻¹.

The calculator gives the same result (3.83e-12 s⁻¹) using the default half-life of 5730 years.

Assumptions

  • The decay follows first-order kinetics (exponential decay).
  • The half-life is constant over time (not affected by pressure, temperature, or chemical state).
  • For the year conversion, we use the average Julian year of 365.25 days.

What Is the Decay Constant λ?

The decay constant λ is a fundamental parameter in nuclear physics. It represents the probability per unit time that a single unstable nucleus will decay. For example, if λ = 0.1 s⁻¹, each nucleus has a 10% chance of decaying in the next second. Because decay is a random process, you cannot predict which nucleus will decay, but with a large number of nuclei, the fraction decaying per second is exactly λ.

λ is related to the half-life by the natural logarithm of 2. The half-life is the time needed for half of the original nuclei to decay. After one half-life, 50% remain; after two, 25%; after three, 12.5%, and so on. This exponential behavior is characteristic of first-order processes.

How to Use This Calculator

Enter the half-life in seconds (or any time unit, but the calculator treats it as seconds). The calculator will output the decay constant in s⁻¹ and also show the half-life in years for convenience. If you know λ instead, you can compute t½ = ln(2)/λ by entering the decay constant in the half-life field (since the formula is symmetric). For example, if λ = 1.21e-4 s⁻¹, then t½ = 0.693147 / 1.21e-4 ≈ 5728 s.

For most practical purposes, you will use this to convert between the two when analyzing decay data, dating samples, or planning experiments.

Common Mistakes and Misconceptions

  • Mixing units: The half-life and λ must use the same time unit. If half-life is in years, λ is in yr⁻¹, not s⁻¹. Always convert to seconds for SI.
  • Confusing λ with the decay rate: The decay rate (activity) is A = λN, where N is the number of undecayed nuclei. λ alone is not the activity.
  • Using ln(2) incorrectly: Some people use log base 10 instead of natural log. Use ln, not log.
  • Thinking half-life is the time to fully decay: A nucleus never fully “decays” in a finite time; it asymptotically approaches zero. After 10 half-lives, about 0.1% remains.

Real-World Examples

Here are a few common isotopes and their half-lives:

  • Carbon-14: 5730 years (used in radiocarbon dating)
  • Uranium-238: 4.468 billion years (used in geological dating)
  • Iodine-131: 8.02 days (medical treatment)
  • Technetium-99m: 6.01 hours (medical imaging)
  • Polonium-214: 164 microseconds (a decay product in the uranium series)

For a short half-life like polonium-214, λ is huge: λ = 0.693 / (164e-6 s) ≈ 4226 s⁻¹, meaning each nucleus has a 4226% chance per second—effectively it decays almost instantly.

Why Does λ Matter in Science?

The decay constant is used in many equations beyond simple half-life conversion. In radiometric dating, the age of a sample is found from t = (1/λ) ln(1 + D/P), where D is the number of daughter nuclei and P is the number of parent nuclei. In nuclear medicine, the effective decay constant combines physical decay and biological clearance. In physics, λ appears in the exponential decay of particles, in the Bateman equations for decay chains, and in calculations of radiation dose.

Understanding λ also helps explain why some isotopes are more dangerous than others: a short half-life means a high decay constant, so more radiation is emitted per unit time, but the material disappears faster. Conversely, a long half-life means low activity but persistent contamination.

Frequently Asked Questions

What is the difference between half-life and decay constant? Half-life is the time for half the nuclei to decay, while decay constant is the probability of decay per unit time. They are inversely related: shorter half-life means larger λ.

Can I use this for non-radioactive processes? Yes, any first-order process follows the same math: chemical reactions, drug elimination, capacitor discharge. The half-life and rate constant (often called k) are related by the same formula.

What if my half-life is in years but I want λ in s⁻¹? Convert years to seconds first (1 year ≈ 3.156e7 s, or use 365.25 days). The calculator does this for you if you enter years in the half-life field, but it assumes you entered seconds. So multiply your years by 3.156e7 before entering.

Why is ln(2) used instead of just 0.5? Because the decay law is exponential. The equation N(t) = N₀ e^(−λt) requires the natural exponential, so solving for t when N = N₀/2 gives ln(2)/λ.

Is λ constant for all isotopes of an element? No, each isotope has its own half-life. For example, carbon-12 is stable, carbon-14 has a half-life of 5730 years, and carbon-11 has a half-life of 20.3 minutes.

Related

Formula used
in t | Half-life | s | 5730 | 0
out lambda | Decay constant λ | s⁻¹ | ln(2) / t | 6
out t_years | Half-life in years | yr | t / (365.25 * 24 * 3600) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →