molecalculator

Moles & Molar Mass

Half-Life Walkthrough: How to Play & Beat It

Calculator No. 01-10067 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A Half-Life walkthrough is a step-by-step guide that helps you navigate the Black Mesa Research Facility, solve its puzzles, and survive its alien and military threats. This article gives you a complete chapter-by-chapter strategy, key combat tips, and puzzle solutions so you can finish the game with minimal frustration. Whether you’re stuck on a specific level or want to know what to expect, this guide covers the essentials.

Formula

Molarity (c) is the number of moles of solute divided by the volume of the solution in liters. The formula is:

c = m / (mm × v/1000)

  • m = mass of solute in grams (g)
  • mm = molar mass of solute in grams per mole (g/mol)
  • v = final solution volume in milliliters (mL), converted to liters by dividing by 1000

The result is the molarity in moles per liter (mol/L), also called M. The second output converts that to millimolar (mM) by multiplying by 1000.

Worked Example

Using the default values from the calculator: m = 2.922 g, mm = 58.44 g/mol (NaCl), v = 250 mL.

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of solute: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
  3. Divide moles by volume: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L

The calculator shows 0.2000 mol/L (or 0.2 M) and 200.00 mM. This matches exactly.

Assumptions

  • The solute is pure and fully dissolves.
  • The final volume is the total solution volume, not the solvent volume.
  • Temperature is 25 °C and pressure is 1 atm (standard conditions) – molarity is temperature-dependent because volume changes.
  • No chemical reaction occurs between solute and solvent.

When to Use This Calculator

Use this calculator whenever you need to prepare a solution of known molarity from a solid reagent. Common lab tasks include making buffers, media, salt solutions, or standards for calibration. You enter the mass you plan to weigh, the molar mass of the compound (from its formula), and the final volume you want. The calculator tells you the concentration you’ll get.

You can also work backwards: if you know the target molarity and volume, you can solve for the required mass. For example, to make 500 mL of 0.1 M NaCl (mm = 58.44), you need 0.1 × 0.5 × 58.44 = 2.922 g. The calculator’s default mass is exactly that amount, so it’s a handy check.

Common Mistakes

  • Using solvent volume instead of final volume: When you dissolve a solid, the final volume is usually slightly larger than the solvent you started with. Always measure the final volume after dissolving.
  • Forgetting to convert mL to L: Molarity is per liter, not per milliliter. A common error is dividing by mL directly, giving a result 1000× too large.
  • Using the wrong molar mass: For hydrated salts (e.g., CuSO₄·5H₂O), include the water of hydration in the molar mass. For acids and bases, use the formula as written.
  • Rounding too early: Keep at least 4 significant figures in intermediate steps to avoid rounding errors in the final concentration.

Limits of the Formula

The molarity formula assumes ideal behavior: the solute dissolves completely and the solution is dilute enough that volume changes are negligible. For concentrated solutions (above ~1 M), the actual volume may differ from the sum of solute and solvent volumes due to molecular interactions. Also, molarity changes with temperature because liquids expand and contract. For precise work, use a volumetric flask and adjust to the mark at the calibration temperature (usually 20 °C or 25 °C).

Frequently Asked Questions

What is the difference between molarity and molality?

Molarity is moles of solute per liter of solution, while molality is moles of solute per kilogram of solvent. Molarity depends on temperature because volume changes, but molality does not because mass is constant. For dilute aqueous solutions, the numerical values are close, but they are not identical.

How do I make a solution of a specific molarity from a stock solution?

Use the dilution formula C₁V₁ = C₂V₂, where C₁ and V₁ are the stock concentration and volume, and C₂ and V₂ are the final concentration and volume. Solve for V₁ = (C₂V₂)/C₁. Always add acid to water, not the reverse, for safety.

Why is the molar mass of NaCl 58.44 g/mol?

Sodium has an atomic weight of 22.99 g/mol and chlorine 35.45 g/mol. Adding them gives 58.44 g/mol. This is the IUPAC abridged standard atomic weight for the elements in their most common isotopic composition.

Can I use this calculator for any compound?

Yes, as long as you know the molar mass. For ionic compounds, use the formula unit mass. For hydrates, include the water molecules. For polymers or mixtures, the concept of molarity is not directly applicable because the molecular weight is not well-defined.

What does ‘final volume’ mean exactly?

It is the total volume of the solution after the solute is completely dissolved and the solution is brought to the desired mark. For example, if you dissolve 2.922 g of NaCl in water and then add water until the total volume is 250 mL, that is the final volume. It is not the volume of water you started with.

How do I convert molarity to mg/mL?

Multiply molarity (mol/L) by the molar mass (g/mol) to get g/L, then divide by 1000 to get mg/mL. For example, 0.2 M NaCl × 58.44 g/mol = 11.688 g/L, which is 11.688 mg/mL.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →