molecalculator

Moles & Molar Mass

Half Life x: Formula, Meaning & How to Calculate It

Calculator No. 01-9135 · Updated · Formula and assumptions shown below

Half life 5.0000 h
Decay constant
0.138629 1/h
Result, rounded to 6 decimal places
Elapsed time
10 h
Set in the form below
Initial amount
100 g
Set in the form below
You enter
Elapsed time (h), Initial amount (g), Remaining amount (g)
You get
Half life (h), Decay constant (1/h)
Rounding
4 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Half life x is the time it takes for half of a given amount of a substance to decay or be eliminated; in nuclear physics it refers to the time for half of a radioactive isotope’s atoms to decay, and in pharmacokinetics it refers to the time for half of a drug’s concentration in the blood to be cleared. To calculate it, you need the decay constant or the initial and remaining amounts over a known time. This article explains the half-life formula, how to use it, common mistakes, and real-world applications.

Formula

The half-life formula comes from the exponential decay law. If you know the initial amount N0, the remaining amount N after time t, then the half-life t1/2 is:

t1/2 = t × ln(2) / ln(N0 / N)

where:

  • t = elapsed time (same unit as the half-life, e.g., hours, days, years)
  • N0 = initial amount (any unit, as long as it matches N)
  • N = remaining amount after time t (same unit as N0)
  • ln = natural logarithm (base e)

If you instead know the decay constant λ (lambda), the half-life is simply:

t1/2 = ln(2) / λ

The decay constant λ is the probability per unit time that a nucleus decays, with units of 1/time (e.g., s−1, h−1). The calculator above uses the first formula (from amounts), and also gives the decay constant derived from that half-life.

Worked Example

Suppose you start with 100 g of a radioactive isotope. After 10 hours, 25 g remain. What is the half-life?

  1. Write down the known values: N0 = 100 g, N = 25 g, t = 10 h.
  2. Compute the ratio N0/N = 100 / 25 = 4.
  3. Take the natural log: ln(4) = 1.386294.
  4. ln(2) = 0.693147.
  5. Apply the formula: t1/2 = 10 × 0.693147 / 1.386294 = 6.93147 / 1.386294 = 5.000 h.

So the half-life is 5 hours. The decay constant λ = ln(2) / 5 h = 0.1386 h−1. After 5 hours, 50 g remain; after another 5 hours (total 10 h), 25 g remain—exactly as given.

Assumptions

  • The decay follows first-order kinetics (exponential decay).
  • The half-life is constant over time (no changes in temperature, pressure, or chemical form affect nuclear decay).
  • The amount measured is the same as the number of radioactive nuclei (no daughter products interfering).
  • For drug clearance, the model assumes first-order elimination, which is true for most drugs at therapeutic doses.

How to Read the Result

The half-life tells you how quickly a quantity diminishes. A short half-life (seconds or minutes) means rapid decay or elimination; a long half-life (years or millennia) means the substance persists. After one half-life, 50% remains; after two, 25%; after three, 12.5%, and so on. After 10 half-lives, less than 0.1% remains, which is often considered negligible in nuclear waste management.

In pharmacokinetics, the half-life helps determine dosing intervals. For example, a drug with a half-life of 24 hours is often given once daily to maintain a steady concentration. After about 4–5 half-lives, a drug reaches steady state (the rate of administration equals the rate of elimination).

Common Mistakes

  • Mixing units: If time is in hours, the half-life will be in hours. Convert days to hours or years to days consistently.
  • Using the wrong ratio: The formula uses ln(N0/N), not ln(N/N0). If you reverse it, you get a negative half-life.
  • Forgetting that half-life is not the same as “time to decay completely”: The substance never fully disappears; it asymptotically approaches zero.
  • Assuming a linear decline: Exponential decay means the amount decreases by a constant fraction per unit time, not a constant amount.
  • Ignoring background radiation: When measuring radioactive samples, background counts must be subtracted, or the remaining amount will be overestimated.

Real-World Applications

Half-life is used in many fields:

  • Nuclear medicine: Isotopes like technetium-99m (half-life ~6 hours) are chosen so that they decay quickly after imaging, minimizing patient exposure.
  • Carbon dating: Carbon-14 has a half-life of 5,730 years; measuring the remaining 14C in organic material estimates its age.
  • Nuclear waste management: Plutonium-239 has a half-life of 24,100 years, which determines storage requirements.
  • Pharmacology: A drug’s half-life guides dosing frequency. For example, acetaminophen has a half-life of about 2–3 hours, so it is taken every 4–6 hours.
  • Environmental science: Pesticides and pollutants in soil and water have half-lives that indicate persistence.

Limitations of the Formula

The simple half-life formula assumes a single exponential decay. In reality, some systems have multiple compartments (e.g., a drug that distributes into tissues) leading to a biphasic curve with a distribution half-life and an elimination half-life. In nuclear decay, some isotopes have multiple decay modes, each with its own partial half-life, but the overall decay still follows a single exponential. Also, the formula assumes you know the exact initial and remaining amounts; in practice, measurements have uncertainties, so the calculated half-life has an error you should estimate.

How to Choose the Right Half-Life Calculator

When using an online half-life calculator, check the following:

  • Does it accept the inputs you have? Some calculators ask for the decay constant, others for initial and remaining amounts.
  • Are the units consistent? The calculator should let you choose time units (seconds, hours, days, years) and convert automatically.
  • Does it show the formula? A transparent calculator lets you verify the math.
  • Does it handle very large or small numbers? For isotopes with half-lives of millions of years, scientific notation is needed.

For drug half-life, remember that the formula gives the elimination half-life only if the drug follows first-order kinetics. For zero-order elimination (e.g., ethanol at high doses), the concept of a constant half-life does not apply.

Frequently Asked Questions

What does a half-life of 10 hours mean? It means that after 10 hours, half of the original radioactive atoms or drug concentration remains. After another 10 hours, half of that remains (25% of the original), and so on.

How do I calculate half-life without a calculator? If you know the fraction remaining after a certain time, you can use the formula or estimate by repeatedly halving. For example, if 12.5% remains after 30 minutes, that is 3 half-lives (50% → 25% → 12.5%), so each half-life is 10 minutes.

What is the difference between half-life and decay constant? The decay constant λ is the probability of decay per unit time, while the half-life is the time for half the sample to decay. They are inversely related: t1/2 = ln(2)/λ.

Why is half-life constant for a radioactive isotope? Because nuclear decay is a random, first-order process. The probability of decay per nucleus per second is constant, regardless of the number of nuclei, temperature, or chemical state.

Can half-life change with temperature or pressure? For nuclear decay, no—the half-life is essentially constant under normal conditions. For chemical reactions or drug elimination, temperature and other factors can change the rate, but the half-life concept still applies if the process is first-order.

How many half-lives until a substance is considered gone? Practically, after 10 half-lives, only 0.1% remains, which is often below detection limits. In nuclear waste, the threshold depends on regulatory limits, but 10–20 half-lives is a common rule of thumb.

Related

Formula used
in t | Elapsed time | h | 10 | 0.000000000001
in n0 | Initial amount | g | 100 | 0
in n | Remaining amount | g | 25 | 0
out hl | Half life | h | t * ln(2) / ln(n0 / n) | 4
out k | Decay constant | 1/h | ln(2) / hl | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →