Yttrium-90 (Y-90) has a physical half-life of 64.053 hours (about 2.67 days). This means that after 64 hours, half of the radioactive Y-90 atoms have decayed into stable zirconium-90, emitting beta particles in the process. The half-life is a fixed nuclear property that determines how quickly the activity decreases and how long the radiation remains a concern.
Formula
The decay of any radioactive isotope follows the exponential decay law:
A(t) = A0 × e−λt
- A(t) = activity remaining after time t (MBq or any activity unit)
- A0 = initial activity (same unit as A(t))
- λ = decay constant = ln(2) / T1/2 (per hour)
- T1/2 = half-life = 64.053 hours for Y-90
- t = elapsed time (hours)
The decay constant for Y-90 is λ = 0.693147 / 64.053 h ≈ 0.010822 h−1. The calculator uses the exact value of ln(2) and the accepted half-life of 64.053 hours.
Worked Example
Suppose you start with 1000 MBq of Y-90 and wait exactly one half-life (64.053 hours).
- λ = ln(2) / 64.053 = 0.693147 / 64.053 = 0.010822 h−1
- λ × t = 0.010822 × 64.053 = 0.693147
- e−0.693147 = 0.5000
- A(64.053 h) = 1000 × 0.5000 = 500.0 MBq
After 64.053 hours, exactly half the initial activity remains, confirming the definition of half-life. After two half-lives (128.106 h), 250 MBq remain; after ten half-lives (about 26.7 days), less than 0.1% remains.
Assumptions
- Pure Y-90 with no impurities (e.g., no Y-90m or Sr-90 contamination).
- The decay follows first-order kinetics, which is true for all radioactive isotopes.
- The half-life is constant regardless of temperature, pressure, or chemical form.
- No additional Y-90 is being produced (e.g., from a Sr-90 generator) during the decay period.
What Is Yttrium-90?
Yttrium-90 is a radioactive isotope of yttrium (atomic number 39) that decays by beta emission to stable zirconium-90. It is produced artificially, most commonly as a decay product of strontium-90 in a radionuclide generator, or by neutron irradiation of yttrium-89 in a nuclear reactor. The beta particles have a maximum energy of 2.28 MeV and an average energy of about 0.94 MeV. In tissue, the beta particles travel only a few millimeters (average range ~2.5 mm, maximum ~11 mm), which makes Y-90 useful for targeted radiation therapy where the radiation is meant to stay localized.
Why the Half-Life Matters
The 64-hour half-life strikes a balance between delivering enough radiation dose and not leaving radioactivity in the body for too long. In medical applications such as radioembolization for liver tumors or radioimmunotherapy, the short half-life means that most of the radiation dose is delivered within the first week. After about 10 half-lives (26.7 days), the activity is essentially gone, which reduces the risk of long-term radiation exposure to healthy tissues and to caregivers. For comparison, iodine-131 has a half-life of 8.02 days, and cesium-137 has a half-life of 30.17 years—both much longer than Y-90.
How to Use the Decay Calculator
Enter the initial activity in megabecquerels (MBq) and the elapsed time in hours. The calculator returns the remaining activity and the fraction remaining as a percentage. You can use any activity unit (mCi, GBq, etc.) as long as you stay consistent—the math is the same. For example, if you have 50 mCi of Y-90 and wait 24 hours, convert to MBq (1 mCi = 37 MBq, so 50 mCi = 1850 MBq), then run the calculation. The fraction remaining is independent of the unit.
Common Mistakes and Misconceptions
- Confusing physical half-life with biological half-life: The physical half-life (64.053 h) is fixed, but the biological half-life (how fast the body clears the isotope) varies by compound and patient. The effective half-life combines both: 1/Teff = 1/Tphys + 1/Tbio.
- Using days instead of hours: The half-life is 64.053 hours, not 64 days. Always convert time to hours before using the formula.
- Assuming linear decay: Decay is exponential, not linear. After 2 half-lives, 25% remains, not 0%.
- Ignoring ingrowth from Sr-90: If Y-90 is separated from a Sr-90 generator, it will start to re-grow. In a clinical setting, the Y-90 is used quickly, but in a lab, the ingrowth can affect measurements.
Safety and Handling
Y-90 is a pure beta emitter, so the main external hazard is to the skin and eyes if the source is close to the body. However, the beta particles can produce bremsstrahlung (X-rays) when they stop in dense materials, so shielding with low-atomic-number materials like plastic or acrylic is preferred over lead (which can generate more bremsstrahlung). Internal exposure is the greater concern—if Y-90 is ingested or inhaled, the beta particles damage tissues locally. Always follow your lab’s radiation safety procedures, the safety data sheet (SDS), and your supervisor’s instructions. The half-life means that contaminated waste must be stored for about 10 half-lives (roughly 27 days) before it can be treated as non-radioactive, depending on local regulations.
Frequently Asked Questions
How many days is 10 half-lives of Y-90?
10 half-lives = 10 × 64.053 hours = 640.53 hours = 26.69 days. After this time, the activity is reduced to 0.1% of the original (1/2^10 = 1/1024). This is often used as a rule of thumb for when a source is considered “decayed away” for practical purposes.
What is the difference between Y-90 and Y-89?
Y-89 is the stable, non-radioactive isotope of yttrium (about 100% natural abundance). Y-90 is radioactive and decays by beta emission. Y-89 is used as a target for neutron activation to produce Y-90 in reactors.
Does Y-90 emit gamma rays?
Y-90 is a pure beta emitter—it does not emit gamma rays in its primary decay. However, the beta particles can produce bremsstrahlung X-rays when they interact with matter, which can be detected and used for imaging, but the dose from these X-rays is much lower than from the betas.
Can I use the half-life to calculate the dose for a patient?
No. The half-life gives you the physical decay, but the actual radiation dose to a tumor or organ depends on the amount of activity administered, the biological clearance, the mass of the target tissue, and the energy deposited. Dose calculations require dosimetry models and are performed by medical physicists. This calculator only handles the physical decay arithmetic.
Why is Y-90 used in liver cancer treatment?
Y-90 microspheres are injected into the hepatic artery, which preferentially supplies blood to liver tumors. Because the beta particles have a short range (a few millimeters), the radiation is delivered locally to the tumor while sparing much of the healthy liver tissue. The 64-hour half-life means the radiation is delivered over a few days, then the isotope decays away.