molecalculator

Moles & Molar Mass

Celsius to Fahrenheit: How to Convert

Calculator No. 01-8795 · Updated · Formula and assumptions shown below

Temperature in Fahrenheit 68.0 °F
Temperature in Celsius
20 °C
Set in the form below
You enter
Temperature in Celsius (°C)
You get
Temperature in Fahrenheit (°F)
Rounding
1 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert Celsius to Fahrenheit, multiply the Celsius temperature by 9/5 (or 1.8) and then add 32. For example, 20 °C × 1.8 + 32 = 68 °F. This page explains the formula, why it works, how to do the math in your head, and common pitfalls when switching between the two scales.

Formula

The conversion formula is written as:

°F = (°C × 9/5) + 32

Where:

  • °C is the temperature in degrees Celsius (the input).
  • °F is the temperature in degrees Fahrenheit (the output).
  • 9/5 is the ratio of the size of one degree Fahrenheit to one degree Celsius (since 180 °F spans the same interval as 100 °C between freezing and boiling of water).
  • 32 is the offset because 0 °C corresponds to 32 °F.

The same formula can be rearranged to convert Fahrenheit to Celsius: °C = (°F − 32) × 5/9.

Worked Example

Using the calculator defaults: convert 20 °C to Fahrenheit.

  1. Multiply 20 by 9/5: 20 × 9/5 = 20 × 1.8 = 36.
  2. Add 32: 36 + 32 = 68.
  3. Result: 20 °C = 68 °F.

The calculator shows 68.0 °F, matching exactly.

Assumptions

  • The formula applies to any temperature, including negative values and values below absolute zero (−273.15 °C).
  • It assumes the standard definitions of both scales (based on water freezing at 0 °C / 32 °F and boiling at 100 °C / 212 °F at 1 atm).
  • No rounding is applied until the final output; the calculator shows one decimal place by default.

Why the Formula Works

Both Celsius and Fahrenheit are linear temperature scales, meaning that a change of one degree in one scale corresponds to a constant change in the other. The key reference points are the freezing and boiling points of water at standard atmospheric pressure:

  • Freezing point: 0 °C = 32 °F
  • Boiling point: 100 °C = 212 °F

The difference between boiling and freezing is 100 °C but 180 °F (212 − 32). Therefore, each Celsius degree is 180/100 = 9/5 = 1.8 times as large as a Fahrenheit degree. The 32 offset shifts the zero point. So the conversion is a linear equation of the form °F = m × °C + b, with m = 9/5 and b = 32.

Quick Mental Estimation

If you don’t need exact numbers, a common approximation is to double the Celsius value and add 30. For 20 °C, that gives 2 × 20 + 30 = 70 °F, which is close to the exact 68 °F. This works best for typical room temperatures (10–30 °C) but becomes less accurate at extremes. For example, 100 °C would estimate to 230 °F instead of the correct 212 °F. Use the exact formula when precision matters, such as in cooking or science.

Common Mistakes and How to Avoid Them

  • Forgetting the +32: Many people multiply by 1.8 but skip the offset. Without +32, 20 °C would give 36 °F instead of 68 °F, a huge error.
  • Using the wrong ratio: The factor is 9/5 (1.8) when going from Celsius to Fahrenheit. Some mistakenly use 5/9, which is for the reverse conversion.
  • Mixing up the order: For Fahrenheit to Celsius, you subtract 32 first, then multiply by 5/9. Doing it in the wrong order gives a wrong answer.
  • Rounding too early: If you round 9/5 to 1.8, that’s fine, but if you round intermediate steps (e.g., 20 × 1.8 = 36, then add 32) you’re safe. Avoid rounding until the final step for exact results.

When to Use Celsius vs. Fahrenheit

Most of the world uses Celsius for everyday temperatures, weather, and science. The Fahrenheit scale is primarily used in the United States and a few other territories for weather, cooking, and body temperature. In scientific contexts, Celsius is common, but the Kelvin scale is the SI base unit. If you travel or read international recipes, knowing both conversions is practical. For example:

  • 0 °C = 32 °F (freezing)
  • 10 °C = 50 °F (cool day)
  • 20 °C = 68 °F (room temperature)
  • 30 °C = 86 °F (hot day)
  • 37 °C = 98.6 °F (normal body temperature)
  • 100 °C = 212 °F (boiling water)

Frequently Asked Questions

What is the easiest way to convert Celsius to Fahrenheit without a calculator?

The mental shortcut is to double the Celsius number and add 30. For 25 °C, that gives 2 × 25 + 30 = 80 °F, while the exact value is 77 °F. It’s fine for casual estimates but not for precise tasks like baking.

Why does the US use Fahrenheit while most countries use Celsius?

The Fahrenheit scale was developed in the early 18th century and became standard in English-speaking countries. The US never officially adopted the metric system, so Fahrenheit remains in everyday use for weather and cooking. Most other countries adopted Celsius as part of the metric system.

Is there a temperature where Celsius and Fahrenheit are the same?

Yes, at −40 degrees, the two scales read the same: −40 °C = −40 °F. You can verify by plugging −40 into the formula: −40 × 9/5 + 32 = −72 + 32 = −40.

How do I convert Fahrenheit to Celsius?

Subtract 32 from the Fahrenheit temperature, then multiply by 5/9. For example, 68 °F − 32 = 36, then 36 × 5/9 = 20 °C. This is the inverse of the Celsius-to-Fahrenheit formula.

What is the difference between 1 degree Celsius and 1 degree Fahrenheit?

One degree Celsius is 1.8 times larger than one degree Fahrenheit. A change of 1 °C corresponds to a change of 1.8 °F. This is why the conversion factor is 9/5.

Why does the formula use 9/5 and 32?

Because 100 Celsius degrees span the same range as 180 Fahrenheit degrees, the ratio is 180/100 = 9/5. The 32 shifts the zero point because water freezes at 0 °C but 32 °F. These two constants define the linear relationship between the scales.

Related

Formula used
in c | Temperature in Celsius | °C | 20 | -273.15 | 1000
out f | Temperature in Fahrenheit | °F | c * 9 / 5 + 32 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →