molecalculator

Moles & Molar Mass

How Many Atoms Does h Have? Planck’s Constant

Calculator No. 01-2569 · Updated · Formula and assumptions shown below

Number of atoms 5.974 × 1023 atoms
Amount of substance
0.992063 mol
= Sample mass ÷ Molar mass of substance
Sample mass
1 g
Set in the form below
Molar mass of substance
1.008 g/mol
Set in the form below
You enter
Sample mass (g), Molar mass of substance (g/mol), Atoms per formula unit (atoms/formula unit)
You get
Number of atoms (atoms), Amount of substance (mol)
Rounding
0 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The symbol h is Planck’s constant, a physical constant—not a chemical element or a collection of atoms—so it does not have an atom count. If you enter a mass and a molar mass for a substance, this calculator works out the estimated number of atoms in that sample; it returns the atom count and the corresponding amount in moles.

Formula

For a sample with mass m in grams and molar mass M in grams per mole, the amount is nmol = m / M. The number of atoms is N = (m / M) × NA × k, where NA = 6.02214076 × 1023 mol−1 is the exact Avogadro constant, and k is the number of atoms of the element being counted in each molecule or formula unit. For a pure element such as helium, k is 1. For water, counting hydrogen atoms gives k = 2, while counting oxygen atoms gives k = 1.

The calculator’s input labeled “Atoms per formula unit” is k, not the total atoms in a molecule unless that total is what you want to count. Molar mass must match the substance and the units shown. For an elemental sample, use the element’s molar mass; for a compound, use its formula molar mass and set k to the count of the chosen element in one formula unit.

Worked Example

Using the block’s default values, the sample mass is 1 g, molar mass is 1.008 g/mol, and the sample contains one atom of the counted element per formula unit:

  • Amount of substance: 1 g ÷ 1.008 g/mol = 0.992063 mol.
  • Number of atoms: 0.9920634921 mol × 6.02214076 × 1023 atoms/mol × 1 = 5.9743469 × 1023 atoms.

Rounded to a whole atom, the calculator displays 597434690000000000000000 atoms. This is a mathematical estimate from the entered values; a macroscopic sample contains an enormous number of particles, and measured mass and molar mass have finite precision.

Assumptions

  • The sample is treated as a pure substance with the stated molar mass.
  • The mass and molar mass use grams and grams per mole, respectively.
  • The counted atoms are represented by the stated number per molecule or formula unit.
  • Avogadro’s constant is exact; uncertainty in the result comes from the sample and input values.

What h Means in Physics

In physics, lowercase h conventionally denotes Planck’s constant. Its exact SI value is 6.62607015 × 10−34 joule-seconds (J·s). It appears in quantum physics, including the relation between a photon’s energy and frequency, E = hf, where E is energy in joules and f is frequency in hertz.

A constant is a defined quantity, not a tiny object made from atoms. The units J·s describe dimensions of energy multiplied by time; they do not describe a physical piece of material. Therefore asking how many atoms are in h is like asking how many atoms are in a numerical conversion factor: there is no atom count to calculate. Planck’s constant can be used in equations about atomic and subatomic systems, but that does not mean the constant itself is an atom or a substance.

How to Calculate Atoms in a Sample

To calculate an atom count, specify a real material and a quantity of it. The standard route is to convert mass to moles using molar mass, then convert moles to particles using Avogadro’s constant. If counting atoms within a compound, multiply by the number of atoms of the chosen element per molecule or formula unit.

  1. Identify the substance and the element whose atoms you want to count.
  2. Find the substance’s molar mass in g/mol. For a compound, add the atomic masses in its chemical formula.
  3. Enter the sample mass in grams and calculate moles as mass divided by molar mass.
  4. Multiply moles by Avogadro’s constant to obtain molecules or formula units, then multiply by the chosen element’s subscript.

For example, water has formula H2O. Each water molecule has two hydrogen atoms and one oxygen atom. A mole of water therefore corresponds to 2 moles of hydrogen atoms and 1 mole of oxygen atoms. To count all atoms in water, use three atoms per molecule; to count only hydrogen, use two.

Atoms, Molecules, and Isotopes

An atom is an individual particle of an element. A molecule is a group of atoms bonded together, such as H2O. Ionic compounds are often described by formula units rather than discrete molecules; sodium chloride, for instance, is counted by NaCl formula units in this kind of calculation. Keeping the particle type clear prevents a common error: multiplying the number of molecules by atoms per molecule is necessary when the question asks for atoms.

Isotopes can affect molar mass. Standard atomic weights used in ordinary chemistry calculations reflect natural isotope abundances and are suitable for typical samples, but a sample enriched in a particular isotope may need a different molar mass. For a single isotope, use its isotope-specific molar mass when appropriate. The result is still an estimate if the sample mass or composition is uncertain.

Common Confusions and Limits

  • Confusing h with hydrogen: Hydrogen’s chemical symbol is H, uppercase. The lowercase h usually means Planck’s constant in physics. Context and capitalization matter.
  • Confusing a constant with a substance: Planck’s constant has units and a numerical value, but no mass or chemical formula. An atom count requires a material sample.
  • Using the wrong molar mass: A compound’s molar mass is not the same as the atomic mass of one element within it.
  • Forgetting the formula subscript: Moles of molecules are not automatically moles of atoms. Apply the relevant atom count per molecule or formula unit.
  • Mixing units: This calculator expects grams and g/mol. Convert milligrams to grams by dividing by 1,000, and kilograms to grams by multiplying by 1,000.

Atom counts are discrete whole numbers in a physical sample, but a calculation based on rounded measurements can produce a non-integer estimate. Rounding the final result does not make the underlying measurement more precise. For very small samples, the continuum assumption implicit in molar calculations may also be a poor description of the actual number of particles.

Frequently Asked Questions

How many atoms does Planck’s constant have?
None. Planck’s constant, h, is a physical constant with units of J·s, not a material object made of atoms.

Does lowercase h mean hydrogen?
No. The chemical symbol for hydrogen is uppercase H. Lowercase h commonly represents Planck’s constant, although symbols can vary by context.

How many atoms are in one mole?
One mole contains exactly 6.02214076 × 1023 specified entities. Those entities may be atoms, molecules, ions, or formula units, depending on what is being counted.

How do I find atoms from a sample’s mass?
Divide its mass by its molar mass to get moles, multiply by Avogadro’s constant to get particles, and multiply by the number of the chosen atoms in each particle.

How many atoms are in a water molecule?
A water molecule, H2O, contains three atoms: two hydrogen atoms and one oxygen atom.

Related

Formula used
in m | Sample mass | g | 1 | 0
in mm | Molar mass of substance | g/mol | 1.008 | 0.001
in n | Atoms per formula unit | atoms/formula unit | 1 | 0.001
out a | Number of atoms | atoms | m / mm * 6.02214076e23 * n | 0
out mol | Amount of substance | mol | m / mm | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →