Nitric acid weighs 63.012 g per mole in its pure molecular form, because its molar mass is 63.012 g/mol. For a liquid sample, the weight depends on how much you have and its concentration; this calculator estimates sample mass from volume and density, or volume from mass and density.
Formula
The calculator uses mass = volume × density. In symbols, m = V × ρ, where m is sample mass in grams, V is liquid volume in millilitres, and ρ is density in grams per millilitre. It then estimates the amount of nitric acid as n = m / M, where n is amount in moles and M is the molar mass, 63.012 g/mol for HNO3.
The density input is deliberately editable: density varies with acid concentration and temperature, so 1.413 g/mL is a conventional reference value for concentrated nitric acid near room temperature, not a universal constant. The amount-in-moles output treats the sample mass as pure HNO3; it is not a valid composition measurement for an aqueous solution unless the mass of HNO3 itself is known.
Worked Example
Using the default inputs, the liquid volume is 10 mL and the entered density is 1.413 g/mL.
- Sample mass: 10 mL × 1.413 g/mL = 14.13 g, displayed as 14.13 g.
- Amount: 14.13 g ÷ 63.012 g/mol = 0.22424 mol, displayed as 0.2242 mol.
The mass is the calculator’s headline result. The mole value follows only under the pure-HNO3 assumption described above.
Assumptions
- The volume and density describe the same liquid sample and temperature.
- The default density is illustrative for concentrated nitric acid near room temperature; use a value appropriate to the product’s concentration and temperature.
- The mole calculation treats the entire sample mass as pure HNO3. For a solution, use the HNO3 mass fraction to find the acid mass first.
- This is calculator arithmetic, not a substitute for a product specification or safety documentation.
What “How Much Does It Weigh?” Means
Weight is often used informally to mean mass. In science, mass is measured in grams or kilograms, while weight is a force measured in newtons and depends on gravity. For ordinary laboratory comparisons on Earth, people commonly ask how many grams a sample “weighs,” and the calculator reports that mass.
There is no single mass for “nitric acid” as a liquid quantity: a drop, a millilitre, and a litre have different masses. The 63.012 g/mol figure answers a different question: the mass of one mole of HNO3 molecules. One mole contains Avogadro’s exact defined number of entities, 6.02214076 × 1023.
Molar Mass and Molecular Composition
Nitric acid has the formula HNO3: one hydrogen atom, one nitrogen atom, and three oxygen atoms. Using abridged standard atomic weights, its molar mass is calculated as follows:
- Hydrogen: 1 × 1.008 = 1.008 g/mol
- Nitrogen: 1 × 14.007 = 14.007 g/mol
- Oxygen: 3 × 15.999 = 47.997 g/mol
Adding these contributions gives 1.008 + 14.007 + 47.997 = 63.012 g/mol. This is a molecular molar mass, not the density or the mass of a fixed volume. It is useful when converting a known mass of pure nitric acid into moles for general stoichiometric calculations.
Density, Concentration, and Volume
Commercial nitric acid is normally an aqueous solution rather than a bottle of pure HNO3. Its density depends strongly on the acid percentage, and also changes with temperature. Therefore, multiplying solution volume by density gives the mass of the entire solution—water plus acid—not the mass of nitric acid alone.
For an aqueous product with a stated HNO3 mass fraction, the acid mass is the solution mass multiplied by that fraction. For example, a mass fraction of 0.68 means 68% of the solution’s mass is nitric acid. Do not apply that example as a universal product value; check the actual label or specification. If concentration is given as a mass percentage, divide the percentage by 100 before multiplying.
When a supplier’s density is stated at a reference temperature, use it at that temperature for the best estimate. A small temperature difference can change the volume and density relationship. For precise work, use the product’s specification and the appropriate measurement method rather than assuming the default density is exact.
Using the Calculator Correctly
Enter the liquid volume in millilitres and density in grams per millilitre. The first result is total sample mass. The second result divides that mass by the pure-acid molar mass; interpret it as moles of HNO3 only when the entered mass really is HNO3, or after correcting an aqueous solution’s mass for its acid fraction.
- Check that volume is in mL, not L. A litre is 1,000 mL.
- Check density units. A value in kg/L has the same numerical value as g/mL, but kg/m3 does not.
- Use enough significant figures for the measurement, but do not report a result more precisely than the volume and density justify.
- For solutions, distinguish mass of solution from mass of dissolved nitric acid.
The calculation assumes a representative density and a correctly measured volume. It does not identify concentration, account for impurities, or establish the exact composition of a product. The result is an estimate whenever the density is approximate.
Safety and Scope
Nitric acid is a corrosive oxidizing acid that can cause severe burns and serious eye injury. Its fumes can be hazardous, and contact with incompatible materials can create additional risks. Consult the relevant safety data sheet (SDS), use only an approved laboratory procedure and appropriate controls, and follow your lab method, the safety data sheet (SDS) and your supervisor. This calculator is for study and lab-planning arithmetic only; it is not handling or dilution guidance.
Frequently Asked Questions
How much does one mole of nitric acid weigh?
One mole of HNO3 has a molar mass of 63.012 g/mol, so one mole has a mass of 63.012 g using the stated atomic weights.
How much does 1 mL of nitric acid weigh?
It depends on concentration and temperature. Using the calculator’s illustrative density of 1.413 g/mL gives about 1.413 g for 1 mL, but an aqueous product can have a different density.
Is nitric acid density the same as its molar mass?
No. Density relates a liquid’s mass to its volume, commonly in g/mL. Molar mass relates the mass of a substance to the amount in moles, in g/mol.
Does the calculator give the mass of pure acid in a solution?
No. It gives total solution mass when volume and solution density are entered. To find the nitric acid portion, also use the solution’s stated mass fraction.
Why can nitric acid density values differ?
Acid concentration and temperature affect density. A value quoted for one concentration or reference temperature should not be treated as universal for every nitric acid solution.
Related
Formula used
in v | Liquid volume | mL | 10 | 0 in d | Density | g/mL | 1.413 | 0 out m | Sample mass | g | v * d | 2 out n | Amount of nitric acid | mol | (v * d) / 63.012 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp