This calculator finds pOH from a hydroxide-ion concentration or from pH. Enter the concentration in mol/L for the direct calculation, or enter pH to use the relationship between pH and pOH; the result is a dimensionless pOH value.
Formula
For hydroxide concentration, pOH = −log10[OH−], where [OH−] is hydroxide concentration in mol/L. The concentration must be greater than zero because the logarithm of zero or a negative number is undefined. At 25 °C, pH + pOH = 14.00, so pOH = 14.00 − pH. This calculator uses the direct concentration formula for its headline result; the second output is intended as a check when you enter pH.
The selection provides two calculation methods. In “From hydroxide concentration” mode, the result is calculated from [OH−]. In “From pH” mode, enter a pH and use pOH = 14.00 − pH; the calculator’s headline expression is set up for the concentration method, so use the pH relationship directly in that mode. The second output adds the entered pH to the calculated pOH and is useful only when the selected inputs correspond to the same solution.
At temperatures other than 25 °C, the general relationship is pH + pOH = pKw, where pKw depends on temperature and solution conditions. Do not assume the sum is always exactly 14.
Worked Example
Using the calculator’s default values, the selected method is “From hydroxide concentration,” with [OH−] = 0.001 mol/L and pH = 11.
- Apply pOH = −log10[OH−].
- Substitute the concentration: pOH = −log10(0.001).
- Since 0.001 = 10−3, pOH = −(−3) = 3.0000.
- The check output is pH + pOH = 11 + 3.000 = 14.000.
The result is pOH 3.0000, consistent with the calculator’s four-decimal display for the headline output. The pH check uses the defaults and is consistent with the 25 °C relationship.
Assumptions
- The pH + pOH = 14 relationship applies at 25 °C for the check shown.
- Concentration is expressed in mol/L, and the direct calculation treats it as the hydroxide activity approximation used in introductory calculations.
- For precise work, pH and pOH are defined through activities, not simply concentrations; temperature and ionic strength can affect the relationship.
What You’ll Need
- A known hydroxide-ion concentration in mol/L, or a pH value if you are using pOH = 14.00 − pH at 25 °C.
- A calculator that can evaluate a base-10 logarithm, or the calculator above.
- The solution temperature if you need a relationship more precise than the 25 °C approximation.
Step-by-Step
- Choose which value you know. Use hydroxide concentration when [OH−] is supplied or measured. Use pH when only pH is known and the solution is at 25 °C; calculate pOH as 14.00 minus pH.
- Check the units. The concentration formula requires mol/L. Convert other units before using it: for example, divide a value in mmol/L by 1000 to obtain mol/L. Do not enter a mass concentration such as g/L as though it were mol/L.
- Enter a positive hydroxide concentration. For the direct calculation, [OH−] must be greater than zero. The logarithm cannot be evaluated at zero or for a negative concentration. If your value is reported as zero because of rounding or a detection limit, use the measurement’s limit or method-specific treatment rather than entering zero.
- Calculate the base-10 logarithm. Evaluate log10 of the concentration, then change its sign: pOH = −log10[OH−]. For instance, 1 × 10−4 mol/L gives pOH 4.
- Alternatively, subtract pH from 14.00. At 25 °C, use pOH = 14.00 − pH. A pH of 9.25 therefore corresponds to pOH 4.75 under this approximation.
- Check that the result is plausible. For dilute aqueous solutions near 25 °C, pOH and pH commonly fall within the familiar 0–14 range, but that range is not a universal hard limit. Confirm pH + pOH ≈ 14 only when the temperature and assumptions support it.
- Keep suitable precision. The number of significant figures in a logarithmic result is generally determined by the significant figures in the concentration’s measured digits. Do not report more precision than the measurement supports.
Common Mistakes
- Forgetting the minus sign: pOH is the negative base-10 logarithm, not log10[OH−] itself. A concentration of 10−5 mol/L gives pOH 5, not −5.
- Using a natural logarithm: The standard formula uses log base 10. If a tool only provides ln, calculate pOH = −ln([OH−])/ln(10).
- Mixing concentration units: A number in mmol/L is 1000 times the same numeric value in mol/L. Convert before taking the logarithm.
- Treating pOH as concentration: pOH is a logarithmic, dimensionless quantity. It is not a concentration in mol/L.
- Assuming pH + pOH is always 14: That shortcut is tied to 25 °C. Water’s ionization changes with temperature, and activity effects can matter in concentrated or non-ideal solutions.
- Rounding too early: Carry extra digits through the logarithm and round the final pOH to a precision supported by the source measurement.
Tips
- For powers of ten, the result is quick to check: [OH−] = 10−n mol/L gives pOH = n.
- Keep the original concentration and its units alongside the pOH. This makes unit conversions and later checks easier to audit.
- If a concentration is provided in another unit, convert it before applying the logarithm. For example, 2.0 mmol/L = 0.0020 mol/L, so pOH = −log10(0.0020) ≈ 2.70.
- For experimental work, a pH meter reading is the real check; temperature and ionic strength shift pH. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Troubleshooting
The calculator says it cannot compute: Check that the concentration is positive and entered as a number in mol/L. Zero and negative concentrations cannot be used in a logarithm.
The answer has the wrong sign: Apply the negative sign after taking log base 10. A concentration below 1 mol/L has a negative base-10 logarithm, so its pOH is positive.
Your result differs from a pH-based calculation: Verify that both values refer to the same sample and temperature, and that the concentration units were converted correctly. At temperatures other than 25 °C, use the appropriate pKw rather than 14.00. Differences can also arise because measured pH reflects activity and electrode conditions, while the simple concentration formula is an approximation.
The displayed digits look implausibly precise: Round to the precision justified by the concentration measurement. A calculator’s extra digits do not make the underlying measurement more accurate.
Frequently Asked Questions
What does pOH measure?
It expresses hydroxide-ion level on a logarithmic scale: pOH = −log10[OH−] when concentration is used in mol/L.
How do I calculate pOH from pH?
At 25 °C, subtract pH from 14.00: pOH = 14.00 − pH. At other temperatures, use the relevant pKw.
Can pOH be negative?
Yes, in sufficiently concentrated solutions a concentration-based pOH can be negative. The familiar 0–14 scale is a common aqueous-solution range, not an absolute rule.
What if hydroxide concentration is given in mmol/L?
Divide the numerical value by 1000 to convert mmol/L to mol/L, then calculate the negative base-10 logarithm.
Is pOH the same as hydroxide concentration?
No. Concentration has units such as mol/L; pOH is a dimensionless logarithmic value derived from concentration or activity.
Does temperature affect pOH?
Yes. Temperature changes water’s ionization constant, so the pH + pOH sum is not always 14.00. Use the applicable pKw for non-25 °C calculations.
Related
Formula used
sel mode | Calculation method | From hydroxide concentration=1, From pH=2 in oh | Hydroxide concentration [OH−] | mol/L | 0.001 | 0 in ph | pH | - | 11 | 0 out poh | pOH | - | -log10(oh) + 0 * sqrt(mode - 1) + 0 * sqrt(2 - mode) + 0 * sqrt(ph) + 0 * sqrt(oh) out sum | pH + pOH at 25 °C | - | ph + poh | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- MD Calc I:T Ratio Calculator and Explanation0.0500 ratio
- Oxygen Mass Number: Isotope Values Explained16 nucleons
- Mass-to-Light Ratio: Meaning and Calculation1.000 M☉/L☉
- Mass Fraction to Molar Fraction Calculator
- M/z Ratio in Mass Spectrometry: Meaning and Calculation1,000.00 Th
- K2 Molar Mass Calculator and Calculation78.1966 g/mol