molecalculator

Moles & Molar Mass

How to Calculate % by Volume (v/v) with Formula & Examples

Calculator No. 01-9123 · Updated · Formula and assumptions shown below

Percent by volume 5.00 %
Volume of solute
25 mL
Set in the form below
Total solution volume
500 mL
Set in the form below
You enter
Volume of solute (mL), Total solution volume (mL)
You get
Percent by volume (%)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Percent by volume (v/v) is a common way to express the concentration of a liquid dissolved in another liquid. You enter the volume of the solute and the total volume of the solution, and the calculator returns the percentage by volume. This guide walks through the formula, a worked example, and common pitfalls so you can do it confidently in the lab or for home projects.

Formula

Percent by volume (v/v) is calculated using this formula:

% v/v = (Volume of solute / Total volume of solution) × 100

Where:

  • Volume of solute – the volume of the pure liquid being dissolved (mL, L, etc.)
  • Total volume of solution – the final volume after mixing, not the solvent volume alone (mL, L, etc.)

Both volumes must be in the same unit. The result is a percentage (unitless).

Worked Example

Using the default values from the calculator: 25 mL of ethanol is mixed with enough water to make a final total volume of 500 mL.

  1. Write the formula: % v/v = (Volume of solute / Total volume) × 100
  2. Plug in the numbers: % v/v = (25 mL / 500 mL) × 100
  3. Divide: 25 / 500 = 0.05
  4. Multiply by 100: 0.05 × 100 = 5.00%

The solution is 5.00% v/v ethanol.

Assumptions

  • Volumes are additive – this holds for many dilute solutions but can fail for concentrated mixtures (e.g., ethanol + water contracts).
  • The solute is a pure liquid, not a powder or gas.
  • Temperature is constant; volumes change with temperature, so % v/v is temperature-dependent.

When to Use Percent by Volume

Use % v/v when both solute and solvent are liquids. Common examples include alcohol in beverages, antiseptic solutions (e.g., isopropyl alcohol), and many lab reagents. It is different from percent by mass (w/w) or mass by volume (w/v).

Common Mistakes

  • Using solvent volume instead of total volume – the denominator must be the final solution volume, not the solvent added. For example, if you add 25 mL solute to 475 mL solvent, the total is 500 mL, not 475 mL.
  • Mixing units – always convert both volumes to the same unit before dividing (e.g., both mL or both L).
  • Assuming volumes are additive – for concentrated solutions like ethanol and water, 50 mL + 50 mL does not equal 100 mL. Measure the final volume after mixing.
  • Confusing % v/v with % w/v – % w/v uses grams of solute per 100 mL of solution, not volumes.

Tips

  • Use a volumetric flask to make the final volume accurate – add solute first, then bring up to the mark with solvent.
  • Record the temperature; if you need high precision, specify it (e.g., 20 °C).
  • For dilutions, remember that the percentage is based on the final total volume, not the volume of solvent added.
  • When mixing two liquids that contract (like ethanol and water), always measure the final volume after mixing.

Troubleshooting

  • Result seems too high or too low – check that the denominator is the total volume, not the solvent volume. Also confirm the units match.
  • Calculator gives an error – ensure the total volume is greater than zero and the solute volume is not larger than the total (unless you are working with a supersaturated solution, which is not typical for v/v).
  • Solution looks different than expected – remember that % v/v is based on volume, not mass. If you weigh the solute, use % w/v instead.

Frequently Asked Questions

What does “v/v” stand for?

It stands for volume per volume – the volume of solute per volume of solution, expressed as a percentage.

Is % v/v the same as % w/v?

No. % v/v uses volumes of solute and solution; % w/v uses mass of solute (in grams) per 100 mL of solution. They are only equal if the solute density is 1 g/mL.

How do I prepare a 10% v/v solution?

Measure 10 mL of solute and add enough solvent to make a final total volume of 100 mL. Do not just add 90 mL of solvent – measure the final volume.

Does temperature affect percent by volume?

Yes. Liquids expand and contract with temperature, so the volumes change. For precise work, specify a temperature (e.g., 20 °C).

Can I use % v/v for gases?

Yes, but for gases it is usually called volume fraction or mole fraction. For ideal gases, volume fraction equals mole fraction.

What if I have a solute that is a solid?

Then use percent by mass (w/w) or mass by volume (w/v), not % v/v.

Related

Formula used
in v_solute | Volume of solute | mL | 25 | 0
in v_total | Total solution volume | mL | 500 | 0.001
out pct | Percent by volume | % | (v_solute / v_total) * 100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →