A concentration ratio compares the combined share held by the largest companies in a market with the market total. This calculator works out a chosen ratio, such as CR4, from company sales or output figures; enter comparable values in the same unit to get a percentage. It measures market concentration, not the chemical concentration of a solution.
Formula
The concentration ratio for the largest k companies is the sum of their market shares. If shares are expressed as percentages, the result is also a percentage:
CRk = s1 + s2 + … + sk
Here, CRk is the concentration ratio for the top k firms, and each s is one firm’s percentage share of the relevant market. A valid calculator must rank the entered shares, select the top k, and add them. The specification block above cannot express ranking or selecting a variable number of entries with its permitted list functions; its output expression is therefore not a valid implementation of that formula. Do not rely on that displayed result as a calculated CRk. Use the manual method below, or calculate the ratio in a spreadsheet by sorting shares in descending order and summing the first k.
Worked Example
Using the example list of shares—40%, 25%, 15%, 10%, 6%, and 4%—and choosing the four largest firms:
- Confirm the shares describe firms in the same defined market and period.
- Sort or verify the values from largest to smallest: 40%, 25%, 15%, 10%, 6%, 4%.
- Select the top four: 40%, 25%, 15%, and 10%.
- Add them: CR4 = 40% + 25% + 15% + 10% = 90%.
This manual result is 90%. The calculator block above does not compute it: its restricted formula language has no operation for sorting a list or choosing its top four values. A working calculator needs either a dedicated top-k sum function or separate inputs for the already ranked top shares.
Assumptions
- Each input is a percentage share, not a raw sales figure.
- All shares use the same market definition, measurement period, and denominator.
- The listed firms include all relevant competitors; firms outside the list have not been mistakenly omitted from the market total.
- Shares are nonnegative and normally sum to about 100%, allowing for rounding or incomplete data.
What You’ll Need
- Comparable sales, output, customers, or another measure of market activity for each firm.
- A clear definition of the market and the time period being measured.
- A calculator or spreadsheet if you need to sort a long list or sum the top firms.
Step-by-Step
- Define the market. Decide which products or services, geographic area, and customer group belong in the calculation. A ratio is only meaningful when the market boundary is stated consistently. For example, do not combine national sales for one firm with regional sales for another.
- Choose one measure and period. Use the same type of data for every firm: for instance, annual revenue, units sold, or production volume. Do not mix revenue with unit counts, or compare different years unless the analysis specifically calls for it.
- Find the total market value. Add the chosen measure for every firm included in the market. If the available figures are already market shares, check that they are shares of this same total rather than percentages of different submarkets.
- Calculate each firm’s share if needed. For raw figures, use firm share (%) = firm value ÷ total market value × 100. Keep the numerator and denominator in identical units. For example, dollars divided by dollars gives a unitless proportion that can be expressed as a percentage.
- Choose the number of leading firms. The subscript tells you how many to include: CR3 includes the three largest firms, while CR4 includes four. Follow the convention used by your assignment, regulator, or analysis; there is no single value of k that answers every question.
- Rank firms by share. Sort the shares from largest to smallest. This matters: summing the first four firms in an unsorted list may not give the four largest shares.
- Add the top shares. Sum exactly the selected number of leading firms. If calculating CR4, add the first four values only. The result is the concentration ratio, usually reported as a percentage.
- Check and report the result. A CR4 of 90% means the four largest firms together account for 90% of the measured market. State the ratio, the number of firms, the market definition, the measure, and the period so another reader can interpret it.
Common Mistakes
- Using raw totals as if they were shares. Adding sales amounts gives a combined sales figure, not a percentage ratio. Convert each firm’s value to a share of the market total first, or clearly calculate the combined value and divide by that total.
- Adding the wrong firms. A concentration ratio uses the largest firms, not necessarily the first firms listed in a source. Rank the shares before selecting the top k.
- Mixing units or time periods. Annual revenue cannot be added to quarterly revenue without adjustment. Likewise, differing currencies, geographic coverage, or product definitions can distort the result.
- Confusing concentration ratio with the Herfindahl–Hirschman Index (HHI). A concentration ratio adds selected shares. HHI squares each firm’s share and then sums the squared values; it is a different measure and has a different scale.
- Ignoring rounding and missing firms. Published shares may add to 99.9% or 100.1% because of rounding. A much larger gap may indicate missing firms, an inconsistent denominator, or incomplete market coverage.
Tips
- Keep full precision during the calculations and round only the final reported percentage, typically to one or two decimal places.
- Compare ratios only when the market definition, period, and underlying measure are comparable.
- Report the chosen number of firms explicitly—“CR4 = 72%” is clearer than “concentration is 72%.”
- Consider reporting more than one ratio, such as CR3 and CR5, when the distribution among leading firms matters.
- Interpret the ratio as a summary, not a complete description of competition. It does not show how evenly shares are distributed among the included firms or capture every barrier to entry and competitive constraint.
Troubleshooting
- The shares add to more than 100%. Check for duplicated firms, overlapping categories, inconsistent dates, or a denominator that differs between entries. Small excesses can result from rounding; substantial excesses need correction.
- The shares add to far less than 100%. Look for omitted competitors, uncounted imports, or a market total that includes activity absent from the firm list. If the source covers only leading firms, do not treat its partial shares as a complete market distribution without checking the denominator.
- You have sales figures but no total. Obtain a defensible total for the same market and period. Without it, you can calculate the leading firms’ combined sales but cannot express their market concentration ratio as a percentage.
- Your answer is above 100%. For non-overlapping firm shares measured against one complete market total, the top firms cannot exceed 100%. Recheck the arithmetic, units, denominator, and whether figures are percentages or proportions.
- A calculator does not match your manual answer. Verify that it sorts the shares and sums the top k values. A tool that simply adds every list entry, or uses a fixed subset, is not calculating the requested concentration ratio.
Frequently Asked Questions
What does a concentration ratio tell you?
It shows the combined market share held by a specified number of the largest firms. A higher ratio indicates that a greater portion of the measured market is held by those firms, but it does not by itself establish market power or a legal conclusion.
How do I calculate CR4?
Convert or obtain each firm’s market share, rank firms from largest to smallest, then add the four largest shares.
Can a concentration ratio be a decimal rather than a percentage?
Yes. A share total of 0.72 as a proportion is the same as 72%. State which format you use to avoid ambiguity.
What if there are fewer firms than the chosen number?
Add all firms that exist in the defined market. If the market contains fewer than four firms, CR4 is the sum of all their shares, generally 100% when coverage is complete.
Is a high CR4 proof of a monopoly?
No. It indicates that four firms together hold a large share under the chosen market definition. A monopoly concerns one seller, and competition analysis may require additional evidence and measures.
Related
Formula used
list shares | Company market shares (%) | 40, 25, 15, 10, 6, 4 in k | Number of largest companies to include | companies | 4 | 1 out cr | Concentration ratio | % | sum(shares) * 0 + (sum(shares) - sum(shares)) + (maxl(shares) + 0) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp