This calculator works out the remaining quantity of a substance after it decays exponentially over time. You enter the initial amount, the decay rate (as a half-life or a rate constant), and the elapsed time, and you get the remaining amount and the fraction left.
Formula
The exponential decay formula is:
A(t) = A0 × (1/2)(t / t1/2)
Where:
- A(t) = the amount remaining after time t (same unit as A0)
- A0 = the initial amount (any unit: grams, moles, becquerels, etc.)
- t = elapsed time (seconds, minutes, hours, years – must match the half-life unit)
- t1/2 = half-life (same time unit as t)
If you prefer to work with a decay constant λ (lambda), the equivalent form is A(t) = A0 × e−λt, where λ = ln(2) / t1/2. The calculator uses the half-life form directly.
Worked Example
Suppose you start with 100 grams of a radioactive isotope with a half-life of 5 seconds, and you wait 10 seconds. How much remains?
Using the formula:
A(10) = 100 × (1/2)(10 / 5) = 100 × (1/2)2 = 100 × 0.25 = 25 grams
The fraction remaining is 0.25, meaning 25% of the original amount is left. The calculator gives the same result: 25.0000.
Assumptions
- The decay follows a pure exponential law – the rate of decay is proportional to the amount present.
- The half-life is constant over time (no environmental changes affecting the decay rate).
- The initial amount and the half-life are measured in consistent units.
When to Use This Calculation
Exponential decay appears in many fields:
- Radioactive decay – determining how much of a isotope remains after a given time.
- Pharmacokinetics – estimating drug concentration in the body after a certain period (though this is a simplified model).
- Capacitor discharge – voltage across a capacitor discharging through a resistor.
- Cooling – Newton’s law of cooling (though that approaches ambient temperature, not zero).
- Population decline – when a population decreases by a constant percentage per time.
How to Read the Result
The main result is the remaining amount. The fraction remaining tells you what percentage of the original is left. For example, a fraction of 0.125 means 12.5% remains. If the fraction is below 1, decay has occurred; if it equals 1, no time has passed.
Common Mistakes
- Unit mismatch – using seconds for time and minutes for half-life. Always convert to the same unit.
- Confusing half-life with decay constant – the half-life is the time for half to decay, not the rate constant λ. Do not plug half-life into λ directly.
- Forgetting that decay is multiplicative, not additive – after two half-lives, you have 25%, not 0%.
- Rounding too early – rounding intermediate fractions can cause significant errors in the final answer.
Tips
- Always check that your time units match. If the half-life is in hours, use hours for elapsed time.
- For quick estimates, remember that after n half-lives, the fraction left is (1/2)n.
- If you have a decay constant λ instead of a half-life, convert using t1/2 = ln(2) / λ.
- Use the fraction remaining output to verify your calculation: it should be between 0 and 1 for positive time.
Troubleshooting
Result is 0 or negative? Check that your elapsed time is not negative. If you see “Cannot compute”, it means the half-life or initial amount is zero or negative – enter positive values.
Result seems too large? If the remaining amount is greater than the initial amount, your elapsed time is negative or your half-life is negative. Both must be positive.
Units are confusing you? Convert everything to the same base unit (e.g., seconds) before entering. For example, if half-life is 5 minutes and elapsed time is 30 seconds, convert 5 minutes to 300 seconds, or 30 seconds to 0.5 minutes.
Getting a different answer than expected? Re-read the problem: are you given a half-life or a decay constant? If it’s a decay constant λ, use the conversion above and then the half-life form.
Frequently Asked Questions
What is the difference between exponential decay and exponential growth?
Decay means the quantity decreases over time, following a curve that approaches zero. Growth increases over time. The formulas are similar, but decay uses a negative exponent (or a half-life less than 1 in the base).
Can I use this for any substance?
Yes, as long as the decay is exponential. Many physical and chemical processes follow this law, but some do not (e.g., zero-order reactions). Check the context.
What if I know the decay constant λ but not the half-life?
Convert using t1/2 = ln(2) / λ. For example, if λ = 0.2 s−1, then t1/2 = 0.693 / 0.2 = 3.465 seconds.
Why is the fraction remaining not a percentage?
The calculator outputs a decimal fraction. To get a percentage, multiply by 100. For instance, 0.25 is 25%.
Does this work for carbon dating?
Yes, carbon-14 dating uses the same exponential decay formula. The half-life of carbon-14 is about 5,730 years. You would enter the initial amount (e.g., 100% of modern carbon) and the remaining fraction to solve for time – but this calculator solves for remaining amount, not time. For time, you would rearrange the formula.
Can I use this for financial depreciation?
Yes, if an asset loses value at a constant percentage rate per year, it follows exponential decay. You can use the half-life as the time it takes to lose half its value, or convert the annual rate to a half-life.
Related
Formula used
in a0 | Initial amount | - | 100 | 0 in t | Elapsed time | s | 10 | 0 in hl | Half-life | s | 5 | 0.000000000000001 out a | Remaining amount | - | a0 * 0.5^(t / hl) | 4 out frac | Fraction remaining | - | 0.5^(t / hl) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED