molecalculator

Moles & Molar Mass

Fahrenheit to Rankine: How to Convert

Calculator No. 01-8798 · Updated · Formula and assumptions shown below

Temperature in Rankine 527.67 °R
Temperature
68 °F
Set in the form below
You enter
Temperature (°F)
You get
Temperature in Rankine (°R)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts a temperature in degrees Fahrenheit (°F) to degrees Rankine (°R). You enter the temperature in Fahrenheit, and the calculator returns the equivalent value on the absolute Rankine scale, which is used in some engineering and thermodynamics applications.

Formula

The conversion from Fahrenheit to Rankine is a simple linear shift:

°R = °F + 459.67

where:

  • °R = temperature in degrees Rankine
  • °F = temperature in degrees Fahrenheit

The constant 459.67 is the number of degrees Rankine above absolute zero that corresponds to 0 °F. On the Rankine scale, absolute zero is 0 °R, which is equivalent to -459.67 °F.

Worked Example

Convert 68 °F to Rankine.

Using the formula:

°R = 68 + 459.67 = 527.67 °R

So, 68 °F is equal to 527.67 °R.

Assumptions

  • The temperature is a point value, not a difference. (For temperature differences, 1 °R = 1 °F, so no offset is needed.)
  • The Fahrenheit scale is defined with the freezing point of water at 32 °F and the boiling point at 212 °F at standard atmospheric pressure.
  • The Rankine scale uses the same degree size as Fahrenheit, but starts at absolute zero.

When to Use This Conversion

The Rankine scale is primarily used in the United States in certain engineering fields, especially in thermodynamics and heat transfer calculations where absolute temperatures are needed but Fahrenheit-based units are already in use. For example, when calculating thermal efficiency of a heat engine or using the ideal gas law with English units, Rankine is the appropriate absolute scale.

In contrast, the Kelvin scale is the SI absolute temperature scale and is used worldwide in science. The conversion between Fahrenheit and Rankine is straightforward because both scales have the same degree size.

How to Read the Result

The result is the temperature on the Rankine scale. Because the Rankine scale starts at absolute zero (0 °R), all temperatures are positive. For example, 0 °F converts to 459.67 °R, and -459.67 °F converts to 0 °R. If you are working with temperature differences, note that a change of 1 °F is exactly equal to a change of 1 °R, so the offset is only applied when converting absolute temperatures.

Common Mistakes

  • Forgetting the offset: The most common error is simply multiplying by a factor or forgetting to add 459.67. Remember, it’s an addition, not a multiplication.
  • Confusing with Celsius to Kelvin: The Celsius-to-Kelvin conversion uses 273.15, not 459.67. Do not mix these up.
  • Using the wrong direction: To convert from Rankine to Fahrenheit, you subtract 459.67. Ensure you are applying the correct operation.
  • Applying to temperature differences: If you have a temperature difference (e.g., 10 °F change), the conversion is simply 10 °R change, not 10 + 459.67. The offset only applies to absolute temperatures.

Tips

  • Double-check your sign: Fahrenheit temperatures can be negative, but Rankine temperatures are always non-negative. If you get a negative Rankine value, you’ve made an error.
  • Use the calculator for quick checks: When doing hand calculations, use the calculator to verify your arithmetic.
  • Remember the absolute zero: Since 0 °R is absolute zero, any temperature in Rankine is a direct measure of the thermal energy relative to absolute zero.

Troubleshooting

If the calculator returns an error or an unexpected result:

  • Check the input: Ensure you entered a numeric value. If you left the field blank, the calculator will not compute.
  • Check the range: The minimum allowed input is -459.67 °F (absolute zero). If you enter a value below that, the calculator will reject it because it is physically impossible.
  • If you get a negative result: This cannot happen with correct inputs, so re-check your entry. If you manually computed and got a negative, you likely subtracted instead of adding.
  • If you need a different scale: Remember that this calculator only converts from Fahrenheit to Rankine. For other conversions, use the appropriate tool.

Frequently Asked Questions

What is the difference between Rankine and Fahrenheit?

Rankine is an absolute temperature scale, meaning it starts at absolute zero (0 °R). Fahrenheit is a relative scale, with 0 °F set at the freezing point of a brine solution. The degree size is the same for both, but the zero points differ by 459.67 degrees.

Why is the conversion factor 459.67?

Absolute zero is -459.67 °F. Since Rankine starts at absolute zero, adding 459.67 to any Fahrenheit temperature shifts the zero point to absolute zero.

How do I convert Rankine back to Fahrenheit?

Subtract 459.67 from the Rankine temperature: °F = °R – 459.67.

Is Rankine used in science?

Rankine is used mainly in engineering fields in the United States, particularly in thermodynamics. The scientific community generally uses Kelvin, which is the SI unit.

Can I convert Celsius to Rankine directly?

Yes, you can use the formula: °R = (°C + 273.15) × 9/5. But it’s easier to convert Celsius to Fahrenheit first, then add 459.67.

What is the Rankine temperature of absolute zero?

0 °R, which is equivalent to -459.67 °F and 0 K.

Related

Formula used
in f | Temperature | °F | 68 | -459.67 | 5000
out r | Temperature in Rankine | °R | f + 459.67 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →