molecalculator

Moles & Molar Mass

Intermolecular Force of Ethanol: Hydrogen Bonding

Calculator No. 01-8966 · Updated · Formula and assumptions shown below

Molarity 1.0000 mol/L
Mass percent
5.84 %
Result, rounded to 2 decimal places
Mass of ethanol
46.07 g
Set in the form below
Molar mass of ethanol
46.07 g/mol
Set in the form below
You enter
Mass of ethanol (g), Molar mass of ethanol (g/mol), Volume of solution (mL)
You get
Molarity (mol/L), Mass percent (%)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The dominant intermolecular force in ethanol (C2H5OH) is hydrogen bonding between the hydroxyl (–OH) group of one molecule and the oxygen atom of another. This strong dipole-dipole interaction explains ethanol’s relatively high boiling point (78.4 °C), its complete miscibility with water, and its ability to dissolve both polar and many nonpolar substances.

Formula

For a solution of ethanol in water, the molarity is calculated as:

c = m / (MM × VL)

where:

  • c = molarity (mol/L)
  • m = mass of ethanol (g)
  • MM = molar mass of ethanol (g/mol), default 46.07 g/mol (C: 12.011 × 2 + H: 1.008 × 6 + O: 15.999)
  • VL = final solution volume in liters (mL ÷ 1000)

The mass percent uses the density of ethanol (0.789 g/mL) to account for the volume contributed by the solute:

w = m / (m + (VmL − m/0.789) × 0.789) × 100

Worked Example

Using the default values: 46.07 g of ethanol (1.000 mol) dissolved to a final volume of 1000 mL.

  1. Convert volume to liters: 1000 mL / 1000 = 1.000 L
  2. Molarity = 46.07 g / (46.07 g/mol × 1.000 L) = 1.000 mol/L (rounded to 4 decimals)
  3. Mass percent: volume of ethanol = 46.07 / 0.789 = 58.39 mL; water volume = 1000 − 58.39 = 941.61 mL; water mass = 941.61 g (density 1 g/mL); total mass = 46.07 + 941.61 = 987.68 g; mass % = 46.07 / 987.68 × 100 = 4.66%

The calculator returns a molarity of 1.0000 mol/L and a mass percent of 4.66%.

Assumptions

  • The density of ethanol is 0.789 g/mL at 25 °C.
  • The density of water is 1.00 g/mL.
  • Volumes are additive (strictly true only for ideal solutions; ethanol-water mixtures show slight contraction).
  • The solution is at room temperature.

Background: Why Ethanol Has Strong Intermolecular Forces

Ethanol is a small organic molecule with a polar hydroxyl group attached to a two-carbon ethyl chain. The O–H bond is highly polar because oxygen is much more electronegative than hydrogen (3.44 vs. 2.20 on the Pauling scale). This creates a permanent dipole moment of about 1.69 debye. The hydrogen atom carries a partial positive charge and can be attracted to the lone-pair electrons on the oxygen of a neighboring ethanol molecule. That attraction, called a hydrogen bond, is roughly 5–10% of the strength of a covalent O–H bond but is far stronger than typical dipole-dipole interactions (about 5–25 kJ/mol vs. 2–8 kJ/mol for ordinary dipole-dipole).

How Hydrogen Bonding Works in Ethanol

Each ethanol molecule has one hydrogen bond donor (the –OH hydrogen) and one acceptor (the oxygen with two lone pairs). In pure liquid ethanol, molecules form transient chains and small clusters, not a rigid network like water. Each molecule participates in about two hydrogen bonds on average. This bonding must be overcome to vaporize the liquid, which is why ethanol boils at 78.4 °C—much higher than dimethyl ether (CH3OCH3, boiling point −24 °C), an isomer with the same molecular formula but no O–H group, so it can only experience weak dipole-dipole forces.

Comparing Ethanol’s Forces to Other Molecules

To appreciate the strength of hydrogen bonding in ethanol, compare it with similar-sized molecules:

  • Ethane (C2H6): only London dispersion forces, boiling point −89 °C.
  • Ethanol (C2H5OH): hydrogen bonding + dispersion, boiling point 78 °C.
  • Water (H2O): two donors and two acceptors per molecule, forming a 3D network, boiling point 100 °C.
  • Ethylene glycol (HOCH2CH2OH): two –OH groups, boiling point 197 °C.

The trend shows that the number of –OH groups directly raises the boiling point because each additional group adds more hydrogen-bonding sites.

Real-World Consequences of Ethanol’s Hydrogen Bonding

Ethanol’s hydrogen bonding explains several everyday observations:

  • Miscibility with water: Ethanol’s –OH group forms hydrogen bonds with water, so the two liquids mix in all proportions. In contrast, hexane (no –OH) separates from water.
  • Solvent power: Ethanol dissolves both polar compounds (like salts, to a degree) and nonpolar ones (like oils) because its ethyl group provides dispersion interactions while the –OH provides dipole and hydrogen-bonding interactions.
  • Cooling effect on skin: When ethanol evaporates, it absorbs heat to break hydrogen bonds, producing a cooling sensation.
  • Vapor pressure: Ethanol’s vapor pressure at 20 °C is about 5.95 kPa, much lower than that of diethyl ether (58.6 kPa) but higher than water (2.34 kPa).

Common Misconceptions

A frequent error is thinking that ethanol has the same hydrogen-bonding capacity as water. Water has two hydrogen atoms and two lone pairs, so it can form four hydrogen bonds per molecule. Ethanol has only one –OH hydrogen and one oxygen, so it can form at most two hydrogen bonds per molecule. This is why ethanol boils lower than water despite having a larger molecular mass. Another misconception is that hydrogen bonding is a “real” chemical bond; it is not a covalent bond—it is an intermolecular attraction, about 10–40 kJ/mol, much weaker than a C–C bond (348 kJ/mol).

Frequently Asked Questions

Is ethanol’s intermolecular force hydrogen bonding or dipole-dipole?

Hydrogen bonding is a special, stronger type of dipole-dipole interaction. Ethanol experiences both ordinary dipole-dipole forces (between the permanent dipoles) and hydrogen bonding specifically between the –OH hydrogen and an oxygen lone pair. The hydrogen bonding dominates the physical properties.

Why does ethanol dissolve in water but oil does not?

Ethanol’s –OH group can hydrogen bond with water, and its short ethyl chain does not disrupt water’s structure too much. Oil molecules are long nonpolar hydrocarbons with no –OH groups, so they cannot form hydrogen bonds with water; the water molecules prefer to hydrogen bond with each other, excluding the oil.

Does ethanol have stronger intermolecular forces than methanol?

No. Methanol (CH3OH) also has one –OH group but a smaller nonpolar methyl group. Methanol boils at 64.7 °C, lower than ethanol’s 78.4 °C. The larger ethyl group in ethanol adds more dispersion forces, so ethanol’s total intermolecular forces are stronger.

Why is ethanol a liquid at room temperature?

Because the hydrogen bonds and dispersion forces are strong enough to keep molecules together at 25 °C. If ethanol had only dispersion forces (like ethane), it would be a gas. The hydrogen bonding raises the boiling point above room temperature.

How does ethanol’s hydrogen bonding affect its boiling point?

It raises it significantly. Without hydrogen bonding, a molecule of ethanol’s size would boil around −25 °C (estimated from similar nonpolar molecules). The actual boiling point is 78.4 °C, an increase of over 100 °C due to hydrogen bonding.

Can ethanol form hydrogen bonds with itself?

Yes. In pure liquid ethanol, each molecule’s –OH hydrogen bonds to the oxygen of a neighboring ethanol molecule. This self-association is what gives ethanol its cohesive properties and high boiling point.

Safety and Handling

Ethanol is flammable (flash point 13 °C) and should be kept away from open flames. It is also a central nervous system depressant; ingestion of concentrated ethanol can cause intoxication or poisoning. When preparing ethanol solutions, follow your lab method and the safety data sheet (SDS) for ethanol. Always wear appropriate eye protection and work in a well-ventilated area.

Related

Formula used
in m | Mass of ethanol | g | 46.07 | 0
in mm | Molar mass of ethanol | g/mol | 46.07 | 0.001
in v | Volume of solution | mL | 1000 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out w | Mass percent | % | m / (m + (v - m / 0.789) * 0.789) * 100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →