molecalculator

Moles & Molar Mass

Is mRNA Made in the Nucleus? Yes, Here’s How

Calculator No. 01-11637 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Yes, messenger RNA (mRNA) is made in the nucleus of eukaryotic cells. Specifically, it is transcribed from DNA in the nucleoplasm (the fluid part of the nucleus) by the enzyme RNA polymerase II, and then processed and exported to the cytoplasm for translation. This is a core difference between eukaryotes (which have a nucleus) and prokaryotes (which lack one and make mRNA in the cytoplasm).

Formula

The molarity (concentration) of a solution is calculated as:

c = m / (M × V)

Where:

  • c = molarity in moles per liter (mol/L, also written M)
  • m = mass of solute in grams (g)
  • M = molar mass of the solute in grams per mole (g/mol)
  • V = final solution volume in liters (L). If you have volume in mL, convert by dividing by 1000.

This is the standard definition of molarity: moles of solute divided by liters of solution.

Worked Example

Using the default values: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution.

Step 1: Convert volume to liters.

V = 250 mL ÷ 1000 = 0.250 L

Step 2: Calculate moles of NaCl.

moles = mass / molar mass = 2.922 g / 58.44 g/mol = 0.05000 mol (exactly, since 2.922 = 0.05 × 58.44)

Step 3: Divide moles by volume.

c = 0.05000 mol / 0.250 L = 0.2000 mol/L

So the molarity is 0.2000 M (or 200.0 mM).

Assumptions

  • The solute is pure and completely dissolves.
  • The final volume is measured after dissolving (not the volume of solvent added).
  • The solution is at a temperature where volume is stable (usually 25 °C).
  • For most lab purposes, the density change upon dissolution is negligible.

Why Molarity Matters in the Lab

Molarity is the most common concentration unit in chemistry and biology because it directly relates to the number of molecules or ions in solution. When you write a reaction equation, the coefficients tell you the mole ratio, so knowing the molarity lets you calculate how much of each reagent to mix. For example, if you need 0.1 moles of NaCl for a buffer, and your stock solution is 2.0 M, you would take 50 mL (0.1 mol ÷ 2.0 mol/L = 0.05 L).

This calculator is useful for preparing solutions, diluting stocks, or checking the concentration of a solution you made. It applies to any solute, from salts to sugars to proteins, as long as you know its molar mass.

Common Mistakes and How to Avoid Them

  • Using solvent volume instead of final volume: Molarity is defined per liter of solution, not per liter of solvent. Always add solute first, then add solvent to the final mark.
  • Forgetting to convert mL to L: A common error is dividing by 1000 twice or not at all. Always check units.
  • Using the wrong molar mass: For hydrated salts (e.g., CuSO4·5H2O), include the water of hydration in the molar mass.
  • Rounding too early: Keep at least 4-5 significant figures during intermediate steps to avoid rounding errors in the final answer.

Limits of the Formula

The molarity formula assumes ideal behavior, which is accurate for dilute solutions. At high concentrations, the volume of solute can significantly affect the final volume, and interactions between ions can change the effective concentration. For precise work, you might need to use molality (moles per kg of solvent) or activity instead. Also, this formula gives the nominal concentration; if the solute is hygroscopic (absorbs water), the actual mass may be less than weighed, so for exact concentrations, you would standardize the solution.

Frequently Asked Questions

How do I make a 1 M solution?
Weigh out 1 mole of the solute (equal to its molar mass in grams), dissolve it in less than 1 L of water, then add water until the total volume is exactly 1 L. For example, for 1 M NaCl, weigh 58.44 g and bring to 1 L.

What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution; molality (m) is moles of solute per kilogram of solvent. Molality is temperature-independent because it uses mass, not volume.

Can I use this calculator for any solute?
Yes, as long as you know the molar mass. For compounds with known formulas, you can calculate the molar mass from atomic weights (e.g., H=1.008, C=12.011, O=15.999).

What if I only have the density of the solute?
If the solute is a liquid, you may need to convert volume to mass using density (mass = volume × density), then use the molar mass. This calculator requires mass in grams, so you would do that conversion first.

Why does the calculator show “Cannot compute” for some inputs?
If you enter a value outside the allowed range (e.g., negative mass or zero volume), the formula cannot produce a meaningful result. The calculator is designed to reject impossible values.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →