molecalculator

Moles & Molar Mass

KCl Grams per Mole: Molar Mass of Potassium Chloride

Calculator No. 01-9111 · Updated · Formula and assumptions shown below

Molarity 0.1568 mol/L
Concentration in millimolar
156.78 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
74.55 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of potassium chloride (KCl) is 74.55 g/mol. This means one mole of KCl—6.022 × 1023 formula units—weighs 74.55 grams. You calculate it by adding the atomic weights of potassium (K, 39.10 g/mol) and chlorine (Cl, 35.45 g/mol).

Formula

The molar mass (M) of a compound is the sum of the atomic weights of its constituent atoms, each multiplied by its subscript in the chemical formula. For KCl:

M(KCl) = Ar(K) + Ar(Cl)

  • Ar(K) = 39.10 g/mol (potassium, IUPAC standard atomic weight)
  • Ar(Cl) = 35.45 g/mol (chlorine)
  • M(KCl) = 39.10 + 35.45 = 74.55 g/mol

The calculator above uses this molar mass to convert between mass of KCl and moles, and then to molarity when you specify a solution volume. The relationship is:

moles = mass / molar mass

molarity (mol/L) = moles / volume (L)

All inputs are in grams, g/mol, and mL; the volume is converted to liters by dividing by 1000.

Worked Example

Using the default values from the calculator: you dissolve 2.922 g of KCl in enough water to make 250 mL of solution. What is the molarity?

  1. Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L
  2. Calculate moles of KCl: moles = 2.922 g / 74.55 g/mol = 0.03920 mol (rounded to 4 significant figures)
  3. Calculate molarity: c = 0.03920 mol / 0.250 L = 0.1568 mol/L

The calculator gives the same result: 0.1568 mol/L (or 156.8 mM). This is a typical physiological salt concentration—isotonic saline is about 0.154 M NaCl, and 0.1568 M KCl is close in ionic strength.

Assumptions

  • The KCl is pure and anhydrous (no water of hydration).
  • The final volume of the solution is exactly 250 mL (not 250 mL of water added to solid).
  • Temperature is 25 °C; molarity is temperature-dependent because volume changes with temperature.
  • Complete dissolution—no undissolved solid remains.

Why 74.55 g/mol Matters in the Lab

Knowing the molar mass lets you convert between mass and moles, which is the core of preparing solutions. For example, to make 1 L of a 1 M KCl solution, you weigh out 74.55 g of KCl and dissolve it in water to a final volume of 1 L. If you only have a balance and a volumetric flask, this conversion is essential.

KCl is widely used in:

  • Buffers for molecular biology (e.g., in DNA hybridization and enzyme reactions)
  • Electrochemistry—as a filling solution for reference electrodes (e.g., saturated KCl)
  • Fertilizer and food processing (as a salt substitute)
  • Calibrating conductivity meters (standard KCl solutions have known conductivities)

The molar mass also appears in colligative property calculations, such as freezing point depression. For instance, a 0.1 m (molal) KCl solution depresses the freezing point of water by about 0.372 °C (assuming complete dissociation into K⁺ and Cl⁻, i = 2).

How to Use the Calculator

Enter any two of the three quantities—mass, molar mass, or volume—and the calculator will compute the molarity. The molar mass is pre-filled with 74.55 g/mol, but you can change it if you are using a different salt (e.g., NaCl = 58.44 g/mol).

Steps:

  1. Type the mass of KCl in grams (e.g., 2.922).
  2. Keep the molar mass at 74.55 (or adjust if using another compound).
  3. Enter the final solution volume in mL (e.g., 250).
  4. Read the molarity in mol/L and in mM.

The calculator is designed for study and lab planning. Always follow your lab’s standard procedures and the safety data sheet (SDS) for KCl when handling the chemical.

Common Mistakes and Misconceptions

1. Confusing molar mass with molecular weight in daltons. The numeric value is the same (74.55 Da per formula unit), but molar mass has units of g/mol. This is not a mistake in practice, but it can cause confusion when converting.

2. Using the wrong atomic weight. Some older tables list chlorine as 35.5, but IUPAC’s abridged standard is 35.45. Always use the most recent standard.

3. Forgetting that KCl dissociates. When you dissolve KCl, it splits into K⁺ and Cl⁻ ions. One mole of KCl gives one mole of K⁺ and one mole of Cl⁻ in solution. This matters for colligative properties and conductivity, but not for molarity calculations.

4. Adding solvent to a final volume vs. adding solute to solvent. Molarity is defined as moles of solute per liter of solution, not per liter of solvent. Always dissolve the solute in a portion of water, then bring the total volume up to the mark.

5. Rounding too early. If you round the molar mass to 74.5 g/mol, your final answer may be off by 0.1%. For precise work, keep at least 4 significant figures.

KCl vs. NaCl: Why Molar Mass Differs

Sodium chloride (NaCl) has a molar mass of 58.44 g/mol (Na = 22.99, Cl = 35.45). Potassium is heavier than sodium (39.10 vs. 22.99), so KCl is about 27.6% heavier per mole. This difference matters when substituting one salt for another in a recipe or buffer—you must use different masses to achieve the same molarity.

For example, to make 500 mL of a 0.5 M solution:

  • NaCl: 0.5 mol/L × 0.5 L × 58.44 g/mol = 14.61 g
  • KCl: 0.5 mol/L × 0.5 L × 74.55 g/mol = 18.64 g

Using the same mass would give a lower molarity for KCl.

Safety and Handling

Potassium chloride is generally low in toxicity, but it is an irritant to eyes and skin in powder form. Dust may cause respiratory irritation. When preparing solutions:

  • Wear safety goggles and gloves.
  • Work in a well-ventilated area or fume hood if handling large quantities.
  • Avoid inhaling the powder—use a dust mask if needed.
  • In case of eye contact, rinse with plenty of water for 15 minutes and seek medical advice.

Always follow your institution’s safety protocols and the SDS provided by your supplier. The calculator is for educational and planning purposes only, not for medical or pharmaceutical use.

Frequently Asked Questions

Q: How many grams are in 0.5 moles of KCl?
Multiply the number of moles by the molar mass: 0.5 mol × 74.55 g/mol = 37.275 g. So 0.5 moles of KCl weighs 37.275 grams.

Q: What is the molar mass of KCl in kg/mol?
Divide by 1000: 74.55 g/mol = 0.07455 kg/mol. This is rarely used, but it appears in some thermodynamic calculations.

Q: Is KCl an ionic compound? Does that affect the molar mass?
Yes, KCl is ionic, consisting of K⁺ and Cl⁻ ions. The molar mass is the sum of the atomic weights of the elements, not the sum of ionic masses (which are essentially the same). The ionic nature affects properties like conductivity, but not the molar mass.

Q: Why is the molar mass sometimes listed as 74.55 and sometimes 74.5513?
The IUPAC standard atomic weights are given as intervals; the abridged values are 39.0983 for K and 35.45 for Cl. Using full precision gives 74.5483, which rounds to 74.55. For most lab work, 74.55 g/mol is sufficient.

Q: How do I prepare a 1 M KCl solution?
Weigh 74.55 g of KCl, transfer to a 1 L volumetric flask, add about 800 mL of distilled water, swirl to dissolve, then fill to the 1 L mark with water. Mix well. The final volume is exactly 1 L.

Q: Does temperature affect the molarity of a KCl solution?
Yes, because water expands when heated, the volume of the solution changes. Molarity (mol/L) decreases with increasing temperature. For precise work, prepare solutions at the temperature you will use them, or use molality (mol/kg) which is temperature-independent.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 74.55 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →