The Key Stage 1 to Key Stage 2 progress calculator measures how much a pupil’s attainment has improved between the end of Key Stage 1 (typically age 7) and the end of Key Stage 2 (typically age 11), based on national test scores. You enter the pupil’s Key Stage 1 fine scores in reading, writing and mathematics, and the Key Stage 2 scaled scores in the same subjects; the calculator returns a progress score for each subject, with 0 representing the national average.
Note: The calculator above uses a simplified model based on the national average progress lines published by the Department for Education. The actual progress score is calculated by comparing a pupil’s Key Stage 2 result with the median result of all pupils with the same Key Stage 1 starting point. The formula here uses a linear approximation for illustration; real scores are derived from national data tables.
Formula
For each subject, the progress score is calculated as:
Progress score = (Actual KS2 result – Expected KS2 result) / Standard deviation
Where:
- Actual KS2 result – the pupil’s scaled score (reading, maths) or teacher assessment judgement (writing).
- Expected KS2 result – the median KS2 result for all pupils with the same KS1 fine score (from national data).
- Standard deviation – the spread of KS2 results for that KS1 starting point (national figure).
In the simplified calculator above, the expected KS2 result is estimated using a linear relationship: Expected = 80 + (KS1 fine score × 6) for reading and maths, and Expected = 1 + (KS1 fine score × 0.8) for writing (on a 1–6 scale). The standard deviation is assumed to be 6 for reading/maths and 1 for writing. These are illustrative constants, not the official national values.
Worked Example
Using the defaults from the calculator:
- KS1 reading fine score: 3.5
- KS1 writing fine score: 3.5
- KS1 maths fine score: 3.5
- KS2 reading scaled score: 104
- KS2 writing TA judgement: 4
- KS2 maths scaled score: 104
Average KS1 fine score = (3.5 + 3.5 + 3.5) / 3 = 3.5
For reading: Expected = 80 + (3.5 × 6) = 80 + 21 = 101. Progress = (104 – 101) / 6 = 3 / 6 = 0.5
For writing: Expected = 1 + (3.5 × 0.8) = 1 + 2.8 = 3.8. Progress = (4 – 3.8) / 1 = 0.2
For maths: Expected = 80 + (3.5 × 6) = 101. Progress = (104 – 101) / 6 = 0.5
The calculator shows: Average KS1 fine score = 3.5, Reading progress = 0.5, Writing progress = 0.2, Maths progress = 0.5.
Assumptions
- The simplified model assumes a linear relationship between KS1 fine scores and expected KS2 scores. The real national distribution is not perfectly linear.
- The standard deviation is assumed constant (6 for reading/maths, 1 for writing). In reality, it varies by KS1 starting point.
- KS1 fine scores are assumed to be on a 0–9 scale (typical for the old national curriculum levels).
- Writing progress uses teacher assessment (TA) on a 1–6 scale, not a scaled score.
- This calculator is for educational planning and understanding; it does not replicate the official DfE calculations exactly.
Background: What Are KS1 and KS2?
In England, the national curriculum is divided into key stages. Key Stage 1 (KS1) covers years 1 and 2 (ages 5–7). At the end of Year 2, pupils take national curriculum tests in reading, writing and mathematics. Their performance is reported as a ‘fine score’ (e.g., 1, 2, 3, 4, 5, 6, 7, 8, 9) based on teacher assessment and test results. Key Stage 2 (KS2) covers years 3 to 6 (ages 7–11). At the end of Year 6, pupils take national tests in reading and mathematics, which are scored on a scaled score scale (80–120, with 100 as the expected standard). Writing is assessed by teachers using a framework, resulting in a judgement (e.g., ‘working towards’, ‘expected’, ‘greater depth’).
How the Official Progress Measure Works
The Department for Education (DfE) publishes ‘progress scores’ for each school, which are used in performance tables. The progress score for a pupil is calculated as:
- Take the pupil’s KS1 fine score (for each subject).
- Find the national median KS2 score for all pupils with that exact KS1 fine score (from the previous year’s national data).
- Subtract that median from the pupil’s actual KS2 score.
- Divide the difference by the standard deviation of KS2 scores for that KS1 group.
The result is a number typically between -5 and +5. A score of 0 means the pupil performed exactly as expected nationally. A positive score means they did better than average; a negative score means they did worse.
How to Use This Calculator
To use the calculator, you need:
- The pupil’s KS1 fine scores in reading, writing and maths (usually from their Year 2 teacher assessment or test results).
- The pupil’s KS2 scaled scores for reading and maths (from their Year 6 test results).
- The pupil’s KS2 writing teacher assessment judgement (converted to a number: e.g., 1 = working towards, 2 = expected, 3 = greater depth, but the calculator uses a 1–6 scale for finer granularity).
Enter these values and the calculator will give an estimated progress score for each subject. This can help you understand whether a pupil is making more or less progress than the national average, which is useful for school planning, parent reports, or identifying pupils who may need extra support.
Common Mistakes and Misconceptions
- Using KS1 levels instead of fine scores: KS1 levels (e.g., 2A, 2B) are not the same as fine scores. Fine scores are numbers (1–9) that map to levels (e.g., 2A = 5, 2B = 4, 2C = 3). Always use fine scores.
- Confusing scaled scores with raw scores: KS2 scaled scores are already standardised (80–120). Do not use raw test marks.
- Writing progress is not based on a scaled score: Writing is teacher assessed, so the ‘expected’ is based on the distribution of TA judgements for each KS1 fine score.
- Assuming 0 means ‘no progress’: A progress score of 0 means the pupil made the average amount of progress, not zero progress.
- Using this calculator for official reporting: The official progress scores are calculated by the DfE using their exact national data. This calculator gives an approximation for understanding, not for official submissions.
Limitations of the Simplified Model
The simplified model assumes a straight-line relationship between KS1 fine scores and expected KS2 scores. In reality, the relationship is not perfectly linear – for example, pupils with very low KS1 scores may have a higher expected KS2 score than the line suggests, because of regression to the mean. Also, the standard deviation of KS2 scores is not constant; it tends to be smaller for pupils with very high or very low KS1 scores. For accurate progress scores, you should use the official DfE ‘Ready Reckoner’ or the school’s own data system, which use the actual national distributions.
Frequently Asked Questions
What is a good progress score?
A progress score of 0 is exactly the national average. Most schools aim for a score between -1 and +1. Scores above +1 indicate that pupils are making significantly more progress than average, which is often a sign of effective teaching. However, a single pupil’s score can fluctuate due to test conditions, so it’s better to look at group averages over time.
How do I get the KS1 fine score?
KS1 fine scores are reported on the pupil’s end-of-key-stage teacher assessment. They range from 1 to 9, with 1 being the lowest and 9 the highest. For example, a pupil working at the expected standard in reading might get a fine score of 5 or 6. If you don’t have the fine score, you can sometimes estimate it from the old national curriculum levels (e.g., 2C = 3, 2B = 4, 2A = 5), but the official fine score is preferable.
Why is writing progress calculated differently?
Writing does not have a national test at the end of KS2; it is assessed by teachers using a statutory framework. This means there is no scaled score, so the progress measure uses the teacher assessment judgement (e.g., ‘working towards the expected standard’, ‘expected standard’, ‘greater depth’). The DfE converts these judgements to a numeric scale for the progress calculation.
Can I use this calculator for a whole class?
Yes, you can enter each pupil’s data individually and then average the progress scores to get a class-level estimate. However, for official school performance measures, the DfE uses a more sophisticated method that accounts for pupil characteristics and school context. This calculator is best for individual or small-group analysis.
Does the progress score account for pupil background?
No, the progress measure is a ‘value-added’ measure that compares pupils with the same prior attainment, regardless of background. It does not directly adjust for factors like deprivation or special educational needs. That is why it is considered a fair measure of school effectiveness, but it does not tell you why a pupil made more or less progress.
Where can I find the official progress scores?
Official progress scores for schools are published in the DfE’s performance tables (now called ‘Compare school performance’). You can also use the DfE’s ‘Ready Reckoner’ tool, which provides the expected KS2 scores for each KS1 fine score, to manually calculate progress. This calculator is a simplified educational tool.
Related
Formula used
in num | KS1 reading fine score | - | 3.5 | 0 | 9 in num | KS1 writing fine score | - | 3.5 | 0 | 9 in num | KS1 maths fine score | - | 3.5 | 0 | 9 in num | KS2 reading scaled score | - | 104 | 80 | 120 in num | KS2 writing TA judgement (1-6) | - | 4 | 1 | 6 in num | KS2 maths scaled score | - | 104 | 80 | 120 out avg | Average KS1 fine score | - | (num + num + num) / 3 | 2 out read | Reading progress score | - | read_prog | 2 out writ | Writing progress score | - | writ_prog | 2 out math | Maths progress score | - | math_prog | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %