molecalculator

Moles & Molar Mass

Ksp to Concentration: Formula & How to Use It

Calculator No. 01-7654 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The Ksp to concentration formula lets you find the molar solubility of a sparingly soluble salt from its solubility product constant (Ksp). You enter the balanced dissolution equation and the Ksp value, and the calculator returns the equilibrium concentration of each ion in mol/L.

Formula

For a general salt AaBb that dissolves as:

AaBb(s) ⇌ aAb+(aq) + bBa−(aq)

the solubility product is:

Ksp = [Ab+]a · [Ba−]b

If the molar solubility is s mol/L, then [Ab+] = a·s and [Ba−] = b·s. Substituting gives:

Ksp = (a·s)a · (b·s)b = aa · bb · sa+b

Solving for s:

s = (Ksp / (aa · bb))1/(a+b)

For the common case of a 1:1 salt like AgCl (a = b = 1), this simplifies to s = √Ksp. For a 1:2 salt like PbI2 (a = 1, b = 2), s = (Ksp/4)1/3.

Worked Example

Calculate the molar solubility of silver chloride (AgCl) at 25 °C, given Ksp = 1.8 × 10−10.

  1. Write the dissolution: AgCl(s) ⇌ Ag+(aq) + Cl−(aq)
  2. Let s = [Ag+] = [Cl−]
  3. Ksp = s · s = s2
  4. s = √(1.8 × 10−10) = 1.34 × 10−5 mol/L

The calculator with defaults (salt type MX, Ksp = 1.8e-10) gives s = 1.34 × 10−5 mol/L, matching the hand calculation. The ion concentrations are both 1.34 × 10−5 mol/L.

Assumptions

  • Ideal dilute solution at 25 °C.
  • Complete dissociation of the dissolved salt into its ions.
  • No common ions already present in the solution.
  • No significant complexation or hydrolysis of the ions.
  • The solid is pure and the solution is saturated.

How to Choose the Right Formula

The exponent in the formula depends on the stoichiometry of the salt. You must know the balanced dissolution equation before you plug in numbers.

  • 1:1 salt (MX) – e.g., AgCl, BaSO4, CaCO3: s = √Ksp
  • 1:2 salt (MX2) – e.g., PbI2, Ca(OH)2: s = (Ksp/4)1/3
  • 2:1 salt (M2X) – e.g., Ag2CrO4: s = (Ksp/4)1/3 (same as 1:2)
  • 2:3 salt (M2X3) – e.g., Fe(OH)3: s = (Ksp/108)1/5

If you are unsure of the stoichiometry, check the formula of the salt and the charges on the ions. For example, Fe(OH)3 gives Fe3+ and 3 OH−, so a = 1, b = 3, and the denominator becomes 11·33 = 27, with exponent 1/4.

Common Mistakes

  • Forgetting the coefficients: Using s = √Ksp for a 1:2 salt underestimates the solubility by a factor of about 1.6.
  • Unit mix-ups: Ksp is usually dimensionless, but concentrations must be in mol/L. If you have Ksp in g/L, convert to mol/L first using molar mass.
  • Ignoring the common ion effect: If the solution already contains one of the ions (e.g., Cl− from NaCl), the solubility is lower than the Ksp calculation predicts.
  • Rounding too early: Keep intermediate values with at least 5 significant figures to avoid errors in the final answer.

Limits of the Formula

The simple Ksp-to-concentration formula works only for sparingly soluble salts in pure water. In real solutions, ionic strength, temperature, and pH can change the effective concentrations. For example, the solubility of CaF2 increases at low pH because F− is protonated to HF. The formula also fails when the salt undergoes hydrolysis or forms complex ions. For most introductory chemistry problems, however, the assumptions hold.

Frequently Asked Questions

What is the difference between Ksp and molar solubility?

Ksp is the equilibrium constant for the dissolution reaction; it is a fixed value at a given temperature. Molar solubility (s) is the concentration of the dissolved salt in a saturated solution. They are related by the formula: Ksp = (a·s)a(b·s)b. Ksp tells you how far the dissolution goes, while s tells you the actual amount that dissolves.

Can I use Ksp to compare solubilities of different salts directly?

Only if the salts have the same stoichiometry. For example, AgCl (Ksp = 1.8×10−10) and BaSO4 (Ksp = 1.1×10−10) are both 1:1, so BaSO4 is slightly less soluble. But you cannot compare AgCl (1:1) with PbI2 (1:2) by Ksp alone; you must calculate s for each.

What does the common ion effect do to the calculation?

If you add a soluble salt that shares an ion with the sparingly soluble salt, the equilibrium shifts left (Le Chatelier’s principle), reducing the solubility. The Ksp expression still holds, but the concentration of the common ion is no longer s; it is s plus the initial concentration. You then solve a quadratic or cubic equation instead of the simple root.

Does temperature affect Ksp?

Yes, Ksp is temperature-dependent. Most solubility increases with temperature, but some salts (like Ca(OH)2) become less soluble as temperature rises. Always use the Ksp value at the temperature of your solution. The formula itself does not include temperature; you must look up the correct Ksp.

What if the salt is not very sparingly soluble?

The formula works for any salt, but for highly soluble salts (like NaCl), the assumption of complete dissociation and ideal behavior breaks down. Ionic strength and ion pairing become significant. The Ksp model is best for salts with solubility below about 0.01 mol/L.

Related

Formula used
in sel | Salt type | MX=1, M2X=2, MX2=4, M3X=2? | 1 | 0
in ksp | Ksp value | - | 1.8e-10 | 0
out s | Molar solubility | mol/L | (ksp / sel)^(1/2) | 4
out c | Ion concentration (Mn+) | mol/L | s * sel | 4
out c2 | Ion concentration (Xm-) | mol/L | s | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →