molecalculator

Moles & Molar Mass

Ksp to Molarity Conversion: Formula and Calculator

Calculator No. 01-3730 · Updated · Formula and assumptions shown below

Molar solubility 0.0040 mol/L
Molar solubility
4.00 mM
= Molar solubility × 1000
Ksp
0.000016
Set in the form below
You enter
Ksp
You get
Molar solubility (mol/L), Molar solubility (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Convert a solubility product, Ksp, to molar solubility by writing the salt’s dissolution equation and solving its Ksp expression for the unknown solubility. This calculator handles a salt that produces one cation and one anion in a 1:1 ratio; enter Ksp to get the molar solubility in mol/L and its millimolar equivalent.

Formula

For a 1:1 salt, AB(s) ⇌ A+(aq) + B−(aq). If its molar solubility is s mol/L, the equilibrium concentrations in pure water are [A+] = s and [B−] = s. Therefore Ksp = [A+][B−] = s2, and s = √Ksp.

  • Ksp is the solubility product for the dissolution reaction as written; it is dimensionless in the thermodynamic definition based on activities, though introductory calculations commonly use concentration-based values.
  • s is molar solubility, in mol/L.
  • To convert mol/L to millimolar, multiply by 1000: 1 mol/L = 1000 mM.

The calculator assumes a 1:1 salt dissolving in pure water with no common ion or other source of either ion. It uses the textbook concentration approximation. The displayed Ksp value is entered as a number, not a percentage or a logarithm. If a source gives pKsp = −log10(Ksp), first convert it using Ksp = 10−pKsp; this calculator does not take pKsp directly.

Worked Example

Using the default Ksp = 1.6 × 10−5 for a 1:1 salt:

  1. Write the equilibrium relation: Ksp = s2.
  2. Rearrange: s = √Ksp = √(1.6 × 10−5) = 0.0040000 mol/L.
  3. Convert to millimolar: 0.0040000 mol/L × 1000 = 4.00 mM.

The calculator therefore returns 0.0040 mol/L and 4.00 mM, using the specified display precision.

Assumptions

  • The solid is a 1:1 salt that dissociates to one cation and one anion per formula unit.
  • The solution is pure water at the temperature for which the entered Ksp applies, with no common ion or other complexing species.
  • Concentrations are used as an approximation to activities; this is most reliable in sufficiently dilute solutions.
  • The solid phase is present at equilibrium, and its dissolution reaction is written correctly.

Why the Dissolution Equation Matters

Ksp cannot be turned into molarity using one universal square-root rule. The correct algebra depends on the ion coefficients in the balanced dissolution equation. For a general salt AmBn(s) ⇌ mAn+ + nBm−, dissolution in pure water gives [An+] = ms and [Bm−] = ns. Under the concentration approximation, Ksp = (ms)m(ns)n = mmnnsm+n. Thus s = [Ksp/(mmnn)]1/(m+n).

For example, a 1:2 salt AB2 produces A2+ and 2B−. Its expression is Ksp = [A2+][B−]2 = s(2s)2 = 4s3, so s = (Ksp/4)1/3, not √Ksp. A 1:2 salt’s molar solubility is the concentration of dissolved formula units; the resulting anion concentration is twice that value.

When This Conversion Is Useful

Ksp-to-solubility calculations help estimate how much of a sparingly soluble ionic solid can dissolve at equilibrium. They are useful in general chemistry problems involving precipitation, comparing solubilities under stated conditions, and estimating ion concentrations in a saturated solution. They do not by themselves determine whether a real mixture will precipitate: that requires comparing the ion product, Q, with Ksp after accounting for all ions already present.

  • If Q < Ksp, the solution is unsaturated with respect to that solid.
  • If Q = Ksp, it is at the saturation boundary under the stated model.
  • If Q > Ksp, precipitation is thermodynamically favored, although nucleation and other kinetic effects can affect how quickly it appears.

For the calculator’s 1:1 case, if Ksp = 1.6 × 10−5, pure-water equilibrium predicts equal concentrations of the two ions: 0.0040 mol/L each. That prediction is not automatically the total dissolved concentration when another source of either ion is present.

Common Complications and Limits

A common ion changes the calculation because the initial ion concentration is no longer zero. For AB in a solution already containing A+ at concentration C, the ideal concentration expression becomes Ksp = (C + s)s, rather than s2. If C is much larger than s, a useful approximation is s ≈ Ksp/C, but the approximation should be checked by substituting the estimate back into the exact equation.

Complex formation, acid–base reactions, and competing solids can also alter free-ion concentrations. Ksp expressions include the free dissolved ions specified by the dissolution equilibrium, not necessarily every dissolved form of an element. For instance, if an ion reacts to form a complex, total dissolved concentration and free-ion concentration differ; a simple square root will not capture that chemistry.

Temperature matters: Ksp is specific to a temperature, and solubility may rise or fall as temperature changes. Ionic strength also matters because thermodynamic equilibrium is expressed in activities, not bare concentrations. In dilute solutions, activity coefficients may be close enough to one for an introductory estimate; in more concentrated solutions, a rigorous calculation may require activity corrections and additional equilibrium data. The calculator has no temperature or activity correction, so use a Ksp value and model appropriate to the conditions being considered.

Check units and rounding carefully. Ksp is commonly tabulated as a numerical equilibrium constant rather than a concentration with ordinary units; the powers of concentration in a concentration-based expression depend on the reaction stoichiometry. Do not attach a universal unit to Ksp or compare values blindly if the dissolution equations, standard-state conventions, or temperatures differ. Keep guard digits during calculations, then round the final solubility to match the precision of the input data.

Frequently Asked Questions

How do I convert Ksp to molarity?
First balance the dissolution equation and write Ksp using the dissolved-ion concentrations. Set each concentration in terms of molar solubility, s, then solve the resulting equation. For a 1:1 salt in pure water, s = √Ksp.

Is molar solubility the same as ion concentration?
Not always. Molar solubility is the amount of dissolved salt formula units per liter. Each ion concentration equals its stoichiometric coefficient times s in the simplest pure-water model. They are equal for each ion only in a 1:1 salt.

Can I use √Ksp for every salt?
No. That shortcut applies to a 1:1 salt under the stated assumptions. Salts with different stoichiometric ratios produce different powers and coefficients in the Ksp expression, so derive the relation from the balanced dissolution equation.

What if the solution already contains a common ion?
Include its starting concentration in the equilibrium expression. For AB with initial [A+] = C, use Ksp = (C + s)s under the ideal concentration model; the pure-water square-root expression no longer applies.

Does Ksp tell me the solubility at every temperature?
No. Use a Ksp measured or specified for the relevant temperature. A value at one temperature should not be assumed to apply unchanged at another.

Using the Result Responsibly

Treat the calculator’s output as a model-based equilibrium estimate, not a measurement or a universal property independent of conditions. Confirm the salt’s formula, dissolution stoichiometry, Ksp source and temperature before interpreting the number. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Related

Formula used
in k | Ksp | - | 1.6e-5 | 0
out s | Molar solubility | mol/L | sqrt(k) | 4
out smm | Molar solubility | mM | s * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →