Lattice enthalpy (more precisely lattice dissociation enthalpy) is the energy change when one mole of an ionic compound is completely separated into its gaseous ions under standard conditions, and for NaCl this is +787 kJ mol⁻¹. You will also meet lattice formation enthalpy, which is the reverse process with a negative sign, so the key is to always state which definition you are using before you answer an exam question.
Formula
The Born-Landé equation gives a theoretical lattice energy from the ionic charges and the distance between ion centres:
U = (NA M z⁺ z⁻ e²) / (4πε₀ r₀) × (1 − 1/n)
- U = lattice energy (J mol⁻¹)
- NA = Avogadro constant, 6.022 × 10²³ mol⁻¹
- M = Madelung constant (1.748 for NaCl, 1.641 for CsCl)
- z⁺, z⁻ = charges on the cation and anion (unitless)
- e = electron charge, 1.602 × 10⁻¹⁹ C
- ε₀ = vacuum permittivity, 8.854 × 10⁻¹² C² J⁻¹ m⁻¹
- r₀ = equilibrium distance between ion centres (m)
- n = Born exponent (typically 8–10, depends on ion electron configuration)
For the OCR A level course, you are not expected to calculate lattice enthalpy from the equation. Instead you use the Born-Haber cycle, which applies Hess’s law to the formation of an ionic compound from its elements.
Born-Haber Cycle
A Born-Haber cycle is a closed loop of enthalpy changes that lets you find lattice enthalpy by adding up other measurable steps. For sodium chloride, the steps are:
- Atomisation of sodium: Na(s) → Na(g), +107 kJ mol⁻¹ (sublimation)
- Atomisation of chlorine: ½Cl₂(g) → Cl(g), +122 kJ mol⁻¹
- First ionisation energy of sodium: Na(g) → Na⁺(g) + e⁻, +496 kJ mol⁻¹
- Electron affinity of chlorine: Cl(g) + e⁻ → Cl⁻(g), −349 kJ mol⁻¹
- Standard enthalpy of formation of NaCl: Na(s) + ½Cl₂(g) → NaCl(s), −411 kJ mol⁻¹
To find lattice dissociation enthalpy, go from the gaseous ions (Na⁺ + Cl⁻) down to the solid, so you reverse the formation arrow: ΔHlat = +107 + 122 + 496 + (−349) − (−411) = +787 kJ mol⁻¹. The positive sign confirms that separating ions requires energy. Lattice formation enthalpy is the same magnitude but negative, −787 kJ mol⁻¹.
Worked Example
Using the default values in the calculator: m = 787 kJ/mol, r = 282 pm, z1 = 1, z2 = 1.
Step 1 – Convert distance: r = 282 pm = 282 × 10⁻¹² m = 2.82 × 10⁻¹⁰ m. In the calculator, r is divided by 100 to convert pm to Å (angstroms), giving 2.82.
Step 2 – Coulombic force (relative): f = (1 × 1) / (2.82²) = 1 / 7.9524 = 0.1257. This shows that the force falls off with the square of the distance.
Step 3 – Born-Landé correction: e = 787 × (1 − 0.345 / 2.82) = 787 × (1 − 0.1223) = 787 × 0.8777 = 690.7 kJ/mol. This is the theoretical lattice energy for NaCl using a Born exponent of 9 (since 1 − 1/9 = 0.8889, close to the 0.8777 from the simplified factor). The experimental value from the Born-Haber cycle is 787 kJ/mol, so the theoretical model is about 12% lower, which is typical because the Born-Landé equation assumes perfect ionic bonding.
Assumptions
- Ions are treated as perfectly spherical, non-polarisable point charges.
- No covalent character is considered – the model works best for strongly ionic compounds like NaCl, less well for MgO or AgCl.
- The Born exponent n is constant for a given ion pair (commonly taken as 9 for NaCl).
- The standard lattice enthalpy refers to 298 K and 1 atm pressure.
Factors Affecting Lattice Enthalpy
Two factors dominate, and exam questions almost always ask you to compare two compounds using them:
- Ionic charge: Lattice enthalpy increases with the magnitude of the charges because the electrostatic attraction is proportional to the product z⁺ × z⁻. For example, MgO (Mg²⁺ and O²⁻) has a lattice enthalpy of about +3791 kJ mol⁻¹, far higher than NaCl (+787 kJ mol⁻¹) despite having similar ion sizes.
- Ionic radius: Smaller ions can pack more closely, so the distance r₀ between charges is smaller, giving a stronger attraction and a higher lattice enthalpy. LiF (r₀ ≈ 201 pm) has a higher lattice enthalpy than KBr (r₀ ≈ 330 pm) because Li⁺ and F⁻ are much smaller.
For ions with the same charge, the trend is straightforward: lattice enthalpy decreases as you go down a group because the ions get bigger. For example, the lattice enthalpies of the sodium halides decrease from NaF (+902 kJ mol⁻¹) to NaCl (+787) to NaBr (+747) to NaI (+704).
Common Mistakes and Misconceptions
The most frequent error in OCR exams is confusing lattice dissociation and lattice formation. Dissociation is always endothermic (positive), formation is always exothermic (negative). Another common slip is forgetting to include the atomisation step for diatomic elements like Cl₂ or O₂ – you cannot go straight from Cl₂(g) to Cl(g) without the bond-breaking enthalpy.
Students also mix up ionisation energy (always endothermic, removing an electron) with electron affinity (can be exothermic for the first electron, but endothermic for adding a second electron to an already negative ion). For example, the second electron affinity of oxygen is +844 kJ mol⁻¹, which is why the Born-Haber cycle for MgO includes a large positive step that many find counterintuitive.
A third misconception is that lattice enthalpy tells you about melting points directly. While higher lattice enthalpy usually means a higher melting point, you also need to consider the structure – MgO has a high lattice enthalpy and melts at 2852 °C, but some covalent solids like diamond melt higher despite having no ionic lattice.
Why Lattice Enthalpy Matters
Lattice enthalpy is not just a theoretical number – it explains real properties of ionic compounds:
- Solubility: A compound dissolves if the hydration enthalpy of the separated ions is more exothermic than the lattice enthalpy is endothermic. NaCl dissolves because the hydration energy of Na⁺ and Cl⁻ (−783 kJ mol⁻¹ combined) is close to the lattice enthalpy (+787), while AgCl is insoluble because its lattice enthalpy (+905) is far greater than the hydration energy of Ag⁺ and Cl⁻ (−844).
- Thermal stability: Carbonates and nitrates decompose when heated because the lattice enthalpy of the oxide product is higher than that of the starting carbonate. For example, MgCO₃ decomposes at about 350 °C because MgO has a very high lattice enthalpy, while BaCO₃ needs over 1300 °C because BaO has a lower lattice enthalpy.
- Born-Haber cycles in industry: The same cycle is used to estimate electron affinities that are hard to measure directly, such as the second electron affinity of oxygen, by rearranging the cycle with a known lattice enthalpy.
Frequently Asked Questions
What is the difference between lattice enthalpy and lattice energy? They are often used interchangeably, but in OCR A level chemistry, lattice enthalpy is defined as an enthalpy change under standard conditions (298 K, 1 atm), while lattice energy is the same concept without the standard condition label. The numerical value is the same for a given compound.
Why is lattice dissociation enthalpy always positive? Because you are breaking the strong electrostatic attractions between oppositely charged ions. This requires energy input, so it is endothermic. The reverse process, lattice formation, releases that same amount of energy and is always negative.
How do I know whether to use + or − in a Born-Haber cycle? Follow the arrows: if you go from the elements to the compound, you use the formation enthalpy (negative for stable compounds). If you go from the gaseous ions to the solid, you are forming the lattice, so you use the negative of the lattice dissociation enthalpy. Always draw the cycle and check that the sum of the upward steps equals the downward step.
Does lattice enthalpy increase or decrease down a group? It decreases down a group because the ionic radius increases, making the distance between ion centres larger and the electrostatic attraction weaker. For example, LiF has a higher lattice enthalpy than CsF.
Why is the theoretical lattice enthalpy sometimes different from the experimental value? The Born-Landé equation assumes perfect ionic bonding. In reality, some covalent character exists, especially for ions with high charge density like Be²⁺ or Ag⁺. When the experimental value is more exothermic than the theoretical one, it indicates significant covalent character in the bond.
Do I need to memorise lattice enthalpy values? No – you need to be able to interpret them and use them in cycles. The OCR data booklet gives you the values you need for calculations, so focus on understanding the trends and the sign conventions.
Related
Formula used
in m | Lattice energy (kJ/mol) | kJ/mol | 787 | 0 in r | Distance between ion centres (pm) | pm | 282 | 0 in z1 | Charge on cation | - | 1 | 1 in z2 | Charge on anion | - | 1 | 1 out f | Coulombic force (relative) | - | (z1 * z2) / ((r / 100)^2) | 4 out e | Born-Landé lattice energy (kJ/mol) | kJ/mol | (m * (1 - 0.345 / (r / 100))) | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Results: How to Analyze Them
- Normality Test Q-Q Plot: How to Read It
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check