molecalculator

Moles & Molar Mass

Litres per Kilometer Calculator: Formula and Examples

Calculator No. 01-6341 · Updated · Formula and assumptions shown below

Fuel consumption 0.0650 L/km
Fuel consumption per 100 km
6.50 L/100 km
= Fuel consumption × 100
Fuel used
6.5 L
Set in the form below
Distance traveled
100 km
Set in the form below
You enter
Fuel used (L), Distance traveled (km)
You get
Fuel consumption (L/km), Fuel consumption per 100 km (L/100 km)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A litres per kilometer calculator finds how many litres of fuel a vehicle uses to travel one kilometer. Enter the fuel used and distance traveled; the calculator returns L/km, with an optional conversion to the more commonly quoted L/100 km.

Formula

Litres per kilometer equals the litres of fuel used divided by the kilometers traveled:

L/km = F / D

  • F is fuel used, in litres (L).
  • D is distance traveled, in kilometers (km).

To convert the result to litres per 100 kilometers, multiply by 100: L/100 km = (F / D) × 100. These are unit conversions, not separate measures of fuel. The calculator requires a positive distance; zero distance cannot produce a meaningful rate. Fuel used may be zero, though a zero result usually means no fuel was recorded or the measurement is incomplete.

Worked Example

Using the calculator’s default values, the vehicle uses 6.5 L over 100 km.

  1. Divide fuel by distance: 6.5 L / 100 km = 0.065 L/km.
  2. Convert to litres per 100 kilometers: 0.065 L/km × 100 = 6.50 L/100 km.

The displayed results are 0.0650 L/km and 6.50 L/100 km. The first uses four decimal places and the second two, as set in the calculator. Display rounding does not change the underlying calculation.

Assumptions

  • The fuel and distance figures refer to the same trip or measurement period.
  • Fuel volume is entered in litres and distance in kilometers; no other unit conversion is applied.
  • The calculation reports an average over the supplied distance, not instantaneous consumption or a prediction of future driving.
  • Fuel volume is taken as recorded; temperature-related expansion and measurement uncertainty are not adjusted.

How to Measure Fuel Use Reliably

A consumption calculation is only as reliable as its inputs. For a practical average, record the odometer reading or trip distance, then measure fuel used over a clearly defined interval. One common approach is to begin and end at the same pump’s automatic shutoff point, while recognizing that pump shutoff and vehicle angle can introduce variation. For greater consistency, repeat the measurement over several fill-ups and use the total litres divided by the total kilometers.

Do not calculate an average by simply averaging separate L/km results if the trips have different distances. Instead, add the fuel and distance totals first. For example, if a vehicle uses 4 L over 50 km and then 8 L over 150 km, the combined rate is (4 + 8) / (50 + 150) = 0.060 L/km, or 6.00 L/100 km. An unweighted average of 0.080 and 0.0533 L/km would not correctly represent the combined journey.

Trip-computer readings can be useful for comparing journeys, but they are estimates based on vehicle data. A measured fuel-and-distance average may differ because of rounding, fuel-level variation, or the way the vehicle estimates fuel delivery. Keep the measurement method consistent when comparing results.

Reading and Comparing the Result

Smaller L/km or L/100 km values mean less fuel is used for a given distance. For example, 0.05 L/km is equivalent to 5 L/100 km. The conversion works because 100 km is 100 times 1 km. To translate a value in L/100 km into L/km, divide by 100.

Fuel economy is also commonly stated as kilometers per litre (km/L), which reverses the ratio. Convert a positive L/km value to km/L by taking its reciprocal: km/L = 1 / (L/km). Thus, 0.05 L/km corresponds to 20 km/L. Do not compare the numbers without checking the units: a larger km/L value indicates better economy, while a smaller L/100 km value indicates better economy.

For an estimated trip, multiply the consumption rate by the distance. At 0.065 L/km, a 240 km trip would use about 0.065 × 240 = 15.6 L, assuming the same average conditions. This is an estimate, not a guarantee; actual use can change with speed, traffic, terrain, load, weather, tire condition, and driving style.

Common Errors and Limits

  • Reversing the division: fuel used divided by distance gives L/km. Distance divided by fuel gives km/L.
  • Mixing units: convert millilitres to litres or miles to kilometers before calculating. For example, 1,000 mL = 1 L and 1 mile = 1.609344 km.
  • Using a short or inconsistent sample: small differences in fuel level or distance become a larger share of the result over a short trip. Longer, repeated measurements generally provide a more representative average.
  • Confusing fuel economy with fuel cost: the calculator does not include fuel price. To estimate cost, multiply litres used by the price per litre, using a price relevant to the journey.
  • Assuming a fixed vehicle rating: consumption changes with driving conditions, maintenance, and vehicle configuration. A single trip result should not be treated as a universal specification.

Record enough digits to avoid unnecessary rounding during the calculation, then round the final result to a useful precision. Reporting many decimal places does not make an uncertain fuel measurement more accurate.

Frequently Asked Questions

How do I calculate litres per kilometer?
Divide litres of fuel used by kilometers traveled. For instance, 12 L over 200 km is 0.06 L/km.

How do I convert L/km to L/100 km?
Multiply L/km by 100. A result of 0.06 L/km becomes 6.00 L/100 km.

Is L/100 km the same as km per litre?
No. L/100 km measures fuel used for a set distance; km/L measures distance traveled per litre. For positive values, km/L is the reciprocal of L/km.

Is a lower litres-per-kilometer result better?
For the same vehicle and comparable conditions, a lower value means less fuel was used per kilometer. Comparisons across different vehicles or conditions need context.

How much fuel will I use on a trip?
Multiply the L/km rate by the trip distance in kilometers. Treat the answer as an estimate because real consumption varies with route and driving conditions.

Related

Formula used
in f | Fuel used | L | 6.5 | 0
in d | Distance traveled | km | 100 | 0.001
out lpkm | Fuel consumption | L/km | f / d | 4
out l100 | Fuel consumption per 100 km | L/100 km | lpkm * 100 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →