molecalculator

Moles & Molar Mass

1 AMU: Mass of a Proton or Neutron?

Calculator No. 01-7740 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One atomic mass unit (amu) is defined as exactly one-twelfth the mass of a carbon-12 atom, and it is approximately equal to the mass of a single proton or a single neutron. However, neither the proton nor the neutron has a mass of exactly 1 amu: a proton is about 1.0073 amu and a neutron is about 1.0087 amu. The amu was chosen as a convenient scale for atomic and nuclear masses, not to match either particle exactly.

Formula

The core conversion is: 1 amu = 1.66053906660 × 10−27 kg (exactly, by definition of the kilogram). To convert any mass in amu to kilograms, multiply by that constant:

mkg = mamu × 1.66053906660 × 10−27

To convert to grams, multiply by 1.66053906660 × 10−24 (since 1 kg = 1000 g). To express the mass in electron masses, divide by the electron rest mass in amu, 0.000548579909 amu.

Variables:

  • mamu – mass in atomic mass units (dimensionless input, typically 1.0073 for a proton, 1.0087 for a neutron).
  • mkg – mass in kilograms (SI unit).
  • mg – mass in grams.
  • me – mass expressed as a multiple of the electron rest mass.

Worked Example

Using the default input of 1.0073 amu (the proton mass):

  1. Convert to kilograms: 1.0073 × 1.66053906660 × 10−27 = 1.67262 × 10−27 kg.
  2. Convert to grams: 1.0073 × 1.66053906660 × 10−24 = 1.67262 × 10−24 g.
  3. Convert to electron masses: 1.0073 ÷ 0.000548579909 = 1836.15 me.

The calculator shows 1.67262 × 10−27 kg, 1.67262 × 10−24 g, and 1836.15 electron masses, matching these steps.

Assumptions

  • The amu is based on the carbon-12 scale, where one atom of 12C has exactly 12 amu.
  • The kilogram conversion uses the CODATA 2018 value for the atomic mass constant.
  • Electron mass is taken as 9.1093837015 × 10−31 kg, which equals 0.000548579909 amu.

Why Not Exactly 1 amu?

The amu was historically defined as 1/16 of an oxygen-16 atom, then later as 1/12 of a carbon-12 atom. This definition was chosen for practical reasons: carbon-12 is a stable, abundant isotope, and setting its mass to 12 makes atomic weights of other elements close to whole numbers. But the proton and neutron are not exactly 1 amu because:

  • The proton is a composite particle (three quarks) with binding energy that contributes to its mass.
  • The neutron is slightly heavier than the proton by about 0.0014 amu (1.29 MeV/c²) because it contains a down quark instead of an up quark, and the quark mass difference plus electromagnetic effects add a small amount.
  • The amu is defined from a nucleus, not from a free proton or neutron. A carbon-12 nucleus contains 6 protons and 6 neutrons, but the nuclear binding energy reduces the total mass by about 0.1 amu, so the average nucleon mass in carbon-12 is exactly 1 amu, but free nucleons are heavier.

In practice, chemists and physicists often say “a proton or neutron has a mass of about 1 amu” when doing rough calculations, but precise work uses 1.0073 and 1.0087.

How to Use the Calculator

Enter any mass in amu—for example, 1.0087 for a neutron, 0.00054858 for an electron, or 238.0508 for a uranium-238 atom. The calculator converts to kilograms, grams, and electron masses. This is useful for:

  • Converting atomic masses to SI units for physics calculations (e.g., using E = mc²).
  • Comparing particle masses in a common unit.
  • Estimating the number of atoms in a sample if you know the mass in amu per atom.

Remember that the amu is also called the dalton (Da), especially in biochemistry. 1 Da = 1 amu exactly. The calculator works identically for both names.

Common Mistakes and Misconceptions

  • Treating 1 amu as exactly the proton mass: This is a useful approximation, but it leads to errors of about 0.7% when calculating nuclear binding energies or precise mass differences.
  • Confusing amu with g/mol: Numerically, 1 amu per particle equals 1 g/mol for a mole of particles. This is because Avogadro’s number (6.022 × 1023) times 1 amu equals 1 gram. So a molecule with a mass of 18 amu has a molar mass of 18 g/mol. This is not a coincidence; it is the basis of the mole concept.
  • Forgetting that the neutron is heavier: In nuclear reactions, the mass difference between the neutron and proton (about 1.29 MeV/c²) is crucial. For example, a free neutron decays into a proton, an electron, and an antineutrino, releasing about 0.78 MeV of energy because the neutron is heavier.
  • Using the older oxygen-16 scale: Before 1961, chemists used oxygen-16 as the reference, which gave slightly different amu values. The modern unified scale (carbon-12) is standard.

Real-World Context: Why It Matters

The precise masses of protons and neutrons are not just academic trivia. They underpin:

  • Nuclear energy and fission: The mass defect (difference between the mass of a nucleus and the sum of its nucleons) is converted to energy according to E = mc². For example, in uranium-235 fission, about 200 MeV of energy is released per event, largely from the mass defect.
  • Mass spectrometry: Instruments measure the mass-to-charge ratio of ions in amu, allowing chemists to identify molecules and isotopes. A difference of 0.001 amu can distinguish between molecules like N2 (28.006 amu) and CO (27.995 amu).
  • Astrophysics: The slight mass difference between protons and neutrons affects stellar nucleosynthesis. The neutron’s extra mass means that free neutrons are unstable, with a half-life of about 10 minutes, which influences the formation of heavy elements.

Frequently Asked Questions

Is 1 amu equal to the mass of a proton?
No, it is very close but not equal. A proton has a mass of 1.007276 amu. The amu is defined as 1/12 of a carbon-12 atom, which is a convenient standard, not a direct measurement of any single particle.

Why is a neutron heavier than a proton?
The neutron is about 0.0014 amu heavier because it contains one down quark and two up quarks, whereas the proton has two up and one down quark. The down quark is slightly heavier than the up quark, and the electromagnetic interactions inside the particles also contribute. This mass difference is why a free neutron can decay into a proton, an electron, and an antineutrino.

How do I convert amu to kg?
Multiply the mass in amu by 1.66053906660 × 10−27 to get kilograms. For example, 1 amu = 1.66053906660 × 10−27 kg. The calculator above does this for you.

What is the difference between amu and g/mol?
They are numerically equal for a single particle vs. a mole. 1 amu per particle = 1 g/mol. This is because Avogadro’s number (6.022 × 1023) is defined such that the mass of one mole of particles in grams equals the mass of one particle in amu.

Why is carbon-12 chosen as the standard?
Carbon-12 is abundant, stable, and has a mass that is nearly an integer (12). Choosing it as exactly 12 amu makes the atomic masses of other elements close to whole numbers, simplifying calculations. It was officially adopted in 1961, replacing the older oxygen-16 standard.

Can I use the same value for a neutron and a proton in calculations?
For rough estimates, yes. But for precise work like nuclear binding energy calculations, you must use 1.008664916 amu for a neutron and 1.007276466 amu for a proton. The difference of about 0.0014 amu corresponds to 1.29 MeV/c², which is significant in nuclear physics.

Related

Formula used
in m | Mass in amu | amu | 1.0073 | 0
out kg | Mass in kilograms | kg | m * 1.66053906660e-27 | 2e-27
out g | Mass in grams | g | m * 1.66053906660e-24 | 2e-27
out me | Mass in electron masses | m_e | m / 0.000548579909 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →