molecalculator

Moles & Molar Mass

Mass of Electron & Proton in kg, amu, MeV

Calculator No. 01-7795 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron has a rest mass of 9.1093837015 × 10−31 kg, and the proton has a rest mass of 1.67262192369 × 10−27 kg. This means a proton is about 1,836 times heavier than an electron, a difference that shapes everything from atomic structure to the chemistry of life.

Formula

The rest mass of a particle is its intrinsic mass when it is not moving relative to the observer. In SI units, mass is measured in kilograms (kg). The values used here are the CODATA 2018 recommended values, which are the most precise measurements available.

To convert mass from kilograms to atomic mass units (u, also called daltons, Da), divide by the atomic mass constant:

m (u) = m (kg) / 1.66053906660 × 10−27 kg/u

To convert mass to energy equivalent in mega-electronvolts (MeV), use Einstein’s mass–energy equivalence:

E = mc²

where c = 299,792,458 m/s. One electronvolt (eV) = 1.602176634 × 10−19 J, so 1 MeV = 1.602176634 × 10−13 J. Thus:

m (MeV/c²) = m (kg) × c² / (1 MeV in J)

Worked Example

Using the default values in the calculator:

  • Electron mass = 9.1093837015 × 10−31 kg
  • Proton mass = 1.67262192369 × 10−27 kg

First, the ratio:

ratio = 1.67262192369 × 10−27 / 9.1093837015 × 10−31 ≈ 1836.15

Electron mass in u:

m_e (u) = 9.1093837015 × 10−31 / 1.66053906660 × 10−27 ≈ 0.000548579909 u

Proton mass in u:

m_p (u) = 1.67262192369 × 10−27 / 1.66053906660 × 10−27 ≈ 1.00727647 u

Electron mass in MeV/c²:

m_e (MeV/c²) = 9.1093837015 × 10−31 × (299792458)² / 1.602176634 × 10−13 ≈ 0.510998950 MeV/c²

Proton mass in MeV/c²:

m_p (MeV/c²) = 1.67262192369 × 10−27 × (299792458)² / 1.602176634 × 10−13 ≈ 938.272088 MeV/c²

These match the calculator’s outputs (rounded to 2 and 6 decimal places as shown).

Assumptions

  • Rest masses are used (particles at rest relative to the observer).
  • CODATA 2018 recommended values are used; they are the current international standard.
  • Conversions use exact defined values: c = 299,792,458 m/s, 1 eV = 1.602176634 × 10−19 J, and the atomic mass constant = 1.66053906660 × 10−27 kg.

Why the Proton Is So Much Heavier

The proton is not a fundamental particle. It is a composite particle made of three quarks (two up quarks and one down quark) held together by the strong nuclear force. The quarks themselves have masses that add up to only about 9.4 MeV/c² (up quark ~2.2 MeV/c², down quark ~4.7 MeV/c²), but the proton’s total mass is about 938 MeV/c². The extra mass comes from the binding energy of the gluons and the kinetic energy of the quarks inside the proton, via E = mc². In fact, over 99% of the proton’s mass is energy, not the intrinsic mass of its quarks.

The electron, on the other hand, is a fundamental lepton with no known internal structure. Its mass is an intrinsic property that cannot be explained by sub-components. Physicists still do not have a fundamental theory that predicts the electron mass; it is measured experimentally.

How These Masses Are Measured

Electron mass is determined indirectly through precision measurements of other constants. The electron’s mass appears in the Rydberg constant (which governs atomic spectra) and in the electron’s magnetic moment (measured in Penning traps). By measuring the electron’s cyclotron frequency and its spin-flip frequency in a magnetic field, physicists can extract the electron’s mass to a relative uncertainty of about 3 × 10−10.

Proton mass is measured using ion traps and mass spectrometry. A proton’s mass is compared to a carbon-12 atom’s mass (which defines the atomic mass unit). The current best value comes from measuring the cyclotron frequencies of a proton and a carbon-12 nucleus in a Penning trap, giving a relative uncertainty of about 3 × 10−10 as well.

Common Misconceptions

One common mistake is thinking that the mass of a proton equals the mass of a hydrogen atom. A hydrogen atom is a proton plus an electron, so its mass is about 1.007825 u, not 1.007276 u. The difference (about 0.00055 u) is the electron’s mass, and the binding energy is negligible (about 13.6 eV).

Another misconception is that the proton’s mass is simply the sum of its quarks’ masses. As noted, that sum is only about 9 MeV/c², so the quark masses contribute less than 1% of the proton’s mass. The rest is field energy.

Also, people sometimes confuse the mass of the proton with the mass of the neutron. The neutron is slightly heavier: 1.008664 u vs. 1.007276 u, a difference of about 1.29 MeV/c². This small difference is why free neutrons decay into protons, electrons, and antineutrinos.

Why These Masses Matter in Chemistry and Physics

The mass ratio of proton to electron (about 1836) determines the behavior of atoms and molecules. It sets the scale of the Bohr radius (the size of atoms) and the energy levels of electrons. If the electron were heavier, atoms would be smaller and chemistry would be very different. The ratio also affects the reduced mass of the electron in an atom, which is why hydrogen and deuterium have slightly different spectral lines.

In mass spectrometry, the exact masses of proton and electron are used to calculate the mass of ions. The electron’s mass is subtracted when converting from neutral atom mass to ion mass. For example, a proton (H⁺) has a mass of 1.007276 u, which is the hydrogen atom mass (1.007825 u) minus the electron mass (0.000549 u).

Frequently Asked Questions

What is the exact mass of an electron in amu?
The electron rest mass is 0.000548579909070 u (atomic mass units). This is often rounded to 0.000549 u or 5.48579909070 × 10−4 u.

What is the mass of a proton in amu?
The proton rest mass is 1.007276466621 u. This is slightly less than the mass of a hydrogen atom (1.007825 u) because the hydrogen atom includes an electron.

Why do we use MeV/c² as a mass unit?
In particle physics, masses are often given in MeV/c² (or GeV/c²) because of the mass–energy equivalence. It is a convenient unit because the masses of particles are tiny in kilograms. For example, the electron is 0.511 MeV/c² and the proton is 938.272 MeV/c². The c² factor is often omitted in informal writing, but it is always implied.

Which is heavier, a proton or a neutron?
A neutron is slightly heavier than a proton. The neutron mass is 1.00866491588 u, while the proton is 1.007276466621 u. The difference is about 1.29 MeV/c², which is why free neutrons decay into protons with a half-life of about 10 minutes.

Does the mass of an electron change when it moves fast?
In special relativity, the relativistic mass increases with speed, but the rest mass (invariant mass) is constant. In modern physics, “mass” usually means rest mass. So the electron’s mass is always 9.109 × 10−31 kg, regardless of speed; its energy and momentum increase, but not its rest mass.

Practical Use in Calculations

In chemistry and physics problems, you often need the mass of a proton or electron to compute things like the mass defect in nuclear reactions, the charge-to-mass ratio in a mass spectrometer, or the reduced mass in quantum mechanics. For example, to calculate the mass defect of a helium-4 nucleus, you add the masses of 2 protons and 2 neutrons, then subtract the actual nuclear mass. The difference is converted to binding energy using E = mc².

When using these masses, always be consistent with units. If you are working in kilograms, use 9.1093837015 × 10−31 kg for the electron and 1.67262192369 × 10−27 kg for the proton. If you are working in atomic mass units, use 0.000548579909 u and 1.007276466621 u. If you are working in MeV/c², use 0.510998950 MeV/c² and 938.272088 MeV/c².

Remember that these are rest masses. In any real experiment, particles may be moving, and you may need to account for relativistic effects if speeds are significant. But for most chemistry and everyday physics, rest masses are sufficient.

Related

Formula used
in m_e | Electron mass (kg) | kg | 9.1093837015e-31 | 0
in m_p | Proton mass (kg) | kg | 1.67262192369e-27 | 0
out ratio | Proton-to-electron mass ratio | - | m_p / m_e | 2
out m_e_amu | Electron mass (u) | u | m_e / 1.66053906660e-27 | 6
out m_p_amu | Proton mass (u) | u | m_p / 1.66053906660e-27 | 6
out m_e_MeV | Electron mass (MeV/c²) | MeV/c² | m_e * 8.987551787368176e16 / 1.602176634e-13 | 6
out m_p_MeV | Proton mass (MeV/c²) | MeV/c² | m_p * 8.987551787368176e16 / 1.602176634e-13 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →