Magnesium phosphate (Mg3(PO4)2) has a molar mass of 262.86 g/mol. This is the mass of one mole of the anhydrous compound, calculated from its chemical formula. If you need to find the mass of a specific amount, use the calculator below.
Formula
The molar mass (M) of a compound is the sum of the atomic masses of all atoms in its formula. For magnesium phosphate, Mg3(PO4)2:
M = 3 × Ar(Mg) + 2 × [Ar(P) + 4 × Ar(O)]
- Ar(Mg) = 24.305 g/mol (magnesium)
- Ar(P) = 30.974 g/mol (phosphorus)
- Ar(O) = 15.999 g/mol (oxygen)
Plugging in: 3 × 24.305 + 2 × [30.974 + 4 × 15.999] = 72.915 + 2 × (30.974 + 63.996) = 72.915 + 2 × 94.970 = 72.915 + 189.940 = 262.86 g/mol.
Worked Example
Let’s use the calculator defaults: you have 2.922 g of magnesium phosphate and you want to make 250 mL of solution. What is the molarity?
- First, convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.
- Calculate moles of solute: moles = mass / molar mass = 2.922 g / 262.86 g/mol = 0.01112 mol.
- Calculate molarity: c = moles / volume = 0.01112 mol / 0.250 L = 0.04448 mol/L.
- Convert to millimolar: 0.04448 mol/L × 1000 = 44.48 mM.
The calculator gives 0.0445 M (rounded to 4 decimal places) and 44.48 mM, matching our manual calculation.
Assumptions
- The compound is anhydrous (no water of crystallization).
- Atomic weights are IUPAC abridged standard values.
- The solution is at room temperature (density effects ignored).
- You are measuring mass accurately and dissolving to the final volume, not adding solvent to a fixed volume.
What Is Magnesium Phosphate?
Magnesium phosphate is an inorganic salt with the formula Mg3(PO4)2. It appears as a white, odorless powder. It exists in several hydrated forms, such as Mg3(PO4)2·4H2O and Mg3(PO4)2·8H2O. The molar mass changes with hydration: for the tetrahydrate, add 4 × 18.015 = 72.06 g/mol, giving 334.92 g/mol. Always check which form you have before calculating.
How to Calculate Mass from Moles
If you know the number of moles (n) and the molar mass (M), the mass (m) is simply:
m = n × M
For example, to get 0.5 moles of anhydrous magnesium phosphate: 0.5 mol × 262.86 g/mol = 131.43 g. This is a common calculation in preparing buffer solutions or culture media.
Common Mistakes
- Forgetting the subscript: The formula has 3 Mg atoms and 2 PO4 groups. A common error is using only 1 Mg or 1 phosphate.
- Using hydrated molar mass: If you weigh the hydrate but use the anhydrous molar mass, your concentration will be wrong.
- Volume unit mix-up: Molarity uses liters, not milliliters. Always divide mL by 1000.
- Rounding too early: Round only at the end to avoid significant errors.
When to Use This Calculator
Use this calculator when you need to prepare a solution of known molarity from solid magnesium phosphate. It is also useful for converting between mass and concentration in stoichiometry problems. For example, if you need a 0.1 M solution for a lab experiment, enter the desired molarity and volume to find the required mass.
Safety and Handling
Magnesium phosphate is generally low in toxicity, but it can irritate eyes and skin. Wear gloves and safety goggles when handling the powder. Avoid inhaling dust. In case of contact, rinse with plenty of water. Always follow your lab’s safety data sheet (SDS) and your supervisor’s instructions.
Frequently Asked Questions
What is the molar mass of magnesium phosphate heptahydrate?
The heptahydrate (Mg3(PO4)2·7H2O) has a molar mass of 262.86 + 7 × 18.015 = 388.97 g/mol. The number of water molecules varies by commercial product, so always verify the label.
Is magnesium phosphate soluble in water?
Anhydrous magnesium phosphate is sparingly soluble in water (about 0.02 g per 100 mL at 25°C). It dissolves better in dilute acids. For practical lab work, you may need to stir or heat slightly, but do not boil.
How do I convert from mg/mL to molarity?
First convert mg to g (divide by 1000), then divide by the molar mass to get moles, then divide by the volume in liters. For example, 10 mg/mL = 0.010 g/mL = 10 g/L. Moles = 10 / 262.86 = 0.03805 mol, so molarity = 0.03805 M.
Why is the molar mass sometimes given as 262.9?
Different sources use slightly different atomic weights. For example, using Mg = 24.3, P = 31.0, O = 16.0 gives 262.9. The IUPAC standard values give 262.86. The difference is negligible for most lab work, but use the precise value for quantitative analysis.
Does magnesium phosphate have any food or medical uses?
Yes, it is used as an anti-caking agent and a dietary supplement for magnesium. However, this calculator is for general laboratory calculations, not for dosing or clinical purposes. Never use it to prepare anything for human or animal consumption without proper supervision.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 262.86 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %