The mass of potassium phosphate (K3PO4) is 212.27 g/mol for the anhydrous form, meaning one mole weighs 212.27 grams. This molar mass is the sum of three potassium atoms (3 × 39.098 = 117.294 g/mol), one phosphorus atom (30.974 g/mol), and four oxygen atoms (4 × 15.999 = 63.996 g/mol). If you are weighing out a sample, the actual mass depends on the number of moles you need, which you can calculate from the desired concentration and volume.
Formula
The molar mass (M) of a compound is the sum of the atomic weights of its constituent atoms. For potassium phosphate (K3PO4):
M = (3 × Ar(K)) + Ar(P) + (4 × Ar(O))
where Ar(K) = 39.098 g/mol, Ar(P) = 30.974 g/mol, Ar(O) = 15.999 g/mol. Thus M = 3(39.098) + 30.974 + 4(15.999) = 117.294 + 30.974 + 63.996 = 212.264 g/mol, often rounded to 212.27 g/mol.
To find the mass of solute needed for a solution, use the molarity equation:
m = M × c × V
where m is mass in grams, M is molar mass in g/mol, c is molarity in mol/L, and V is volume in liters (convert mL to L by dividing by 1000). The calculator above rearranges this to solve for molarity from a given mass.
Worked Example
Suppose you want to prepare 250 mL of a 0.0550 mol/L solution of potassium phosphate. Using the default mass of 2.922 g and molar mass 212.27 g/mol:
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of solute: 2.922 g ÷ 212.27 g/mol = 0.01377 mol
- Calculate molarity: 0.01377 mol ÷ 0.250 L = 0.05508 mol/L
Rounded to four decimal places, the molarity is 0.0551 mol/L, which matches the calculator output. The millimolar concentration is 55.08 mM.
Assumptions
- The compound is anhydrous potassium phosphate (K3PO4), not the hydrated forms like K3PO4·H2O or K3PO4·7H2O, which have higher molar masses.
- The solution is prepared by dissolving the solid in a final volume of 250 mL (not adding 250 mL of solvent to the solute).
- Dissociation is complete for calculation purposes; in reality, phosphate ions hydrolyze slightly in water, but this does not affect the molar mass calculation.
- Atomic weights are the IUPAC abridged standard values.
When to Use This Calculation
You need the mass of potassium phosphate when preparing buffer solutions, culture media, or fertilizer solutions. For example, in molecular biology, phosphate-buffered saline (PBS) often uses potassium phosphate as a component. In agriculture, you might calculate how much K3PO4 to add to a hydroponic solution to achieve a specific phosphorus or potassium concentration. The molar mass is also essential for converting between mass and moles in stoichiometric calculations, such as determining the yield of a reaction that produces or consumes potassium phosphate.
Common Mistakes and How to Avoid Them
- Using the wrong form: Potassium phosphate exists as monobasic (KH2PO4, MW 136.09), dibasic (K2HPO4, MW 174.18), and tribasic (K3PO4, MW 212.27). Check the label on your reagent bottle. The calculator above uses K3PO4; if you have a different salt, enter its molar mass.
- Confusing volume and solvent: The final volume is the total volume after dissolving, not the volume of water added. Always dissolve the solid in less water, then bring up to the final volume in a volumetric flask.
- Unit errors: Molarity is mol/L, so volume must be in liters. If you enter mL directly in the formula without dividing by 1000, you will get a molarity that is 1000 times too high.
- Rounding too early: Use at least 5 significant figures in intermediate steps. Rounding the molar mass to 212 g/mol can introduce a 0.1% error, which matters for precise buffers.
Hydrated Forms and Their Molar Masses
Potassium phosphate is often sold as hydrates. The monohydrate (K3PO4·H2O) has a molar mass of 230.28 g/mol (212.27 + 18.015), and the heptahydrate (K3PO4·7H2O) has a molar mass of 338.37 g/mol (212.27 + 7 × 18.015). If you use a hydrate, you must adjust the mass accordingly. For example, to get the same 0.0550 mol/L in 250 mL using the monohydrate, you would weigh 0.01377 mol × 230.28 g/mol = 3.172 g instead of 2.922 g. Always check the label for the exact formula and water content.
Safety and Handling
Potassium phosphate is generally low in acute toxicity, but it can irritate the eyes and skin. Wear gloves and safety goggles when handling the powder. Avoid inhaling dust. In solution, it is a mild irritant. If you spill it, sweep up the solid and dissolve in water for disposal, or follow your institution’s waste guidelines. For any laboratory work, follow your lab method, the safety data sheet (SDS) and your supervisor. Do not ingest potassium phosphate; it is a laxative at high doses and should not be consumed.
Frequently Asked Questions
What is the molar mass of potassium phosphate?
The molar mass of anhydrous K3PO4 is 212.27 g/mol. This is the sum of 3 potassium atoms (117.294 g/mol), 1 phosphorus (30.974 g/mol), and 4 oxygen (63.996 g/mol).
How many grams are in 1 mole of K3PO4?
One mole of K3PO4 weighs 212.27 grams. If you have a hydrate, the mass is higher; for example, the monohydrate weighs 230.28 g/mol.
How do I prepare 500 mL of 0.1 M potassium phosphate?
Calculate mass: 0.1 mol/L × 0.5 L × 212.27 g/mol = 10.6135 g. Weigh 10.61 g of anhydrous K3PO4, dissolve in about 400 mL of distilled water, then adjust the volume to 500 mL in a volumetric flask.
Is potassium phosphate the same as monopotassium phosphate?
No. Potassium phosphate (K3PO4) is the tribasic salt with three potassium ions. Monopotassium phosphate (KH2PO4) has one potassium and a molar mass of 136.09 g/mol. They are different compounds with different properties and uses.
What is the mass of potassium in 100 g of K3PO4?
Potassium makes up (3 × 39.098) / 212.27 = 0.5526, or 55.26% of the mass. So 100 g of K3PO4 contains 55.26 g of potassium. This is useful for fertilizer calculations.
Why does the calculator ask for the molar mass as an input?
Because potassium phosphate can be anhydrous or hydrated, and you might also use the calculator for other salts. The default is set to anhydrous K3PO4, but you can change it to match your reagent.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 212.27 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %