Gas pressure is the force exerted by gas molecules colliding with the walls of their container, measured as force per unit area. You measure it with a manometer, barometer, or pressure gauge, and the result is expressed in pascals, atmospheres, torr, or pounds per square inch. This page explains the physics behind gas pressure, the instruments used to measure it, how to convert between units, and common pitfalls to avoid.
Formula
The calculator converts a pressure value given in pascals (Pa) into the four most common pressure units. The conversions are:
- 1 atm = 101,325 Pa (exact, by definition)
- 1 atm = 760 torr = 760 mmHg (exact)
- 1 atm = 14.6959 psi (pounds per square inch)
- 1 bar = 100,000 Pa (exact)
In symbols: Patm = PPa / 101,325; Ptorr = PPa × (760 / 101,325); Ppsi = PPa × 0.000145038; Pbar = PPa / 100,000.
Worked Example
Suppose you read a pressure of 101,325 Pa (exactly one standard atmosphere) and want to know the value in torr and psi.
- Atmospheres: 101,325 / 101,325 = 1.0000 atm.
- Torr: 101,325 × (760 / 101,325) = 760.00 torr.
- PSI: 101,325 × 0.000145038 = 14.696 psi.
- Bar: 101,325 / 100,000 = 1.0133 bar.
The calculator shows the same results: 1.0000 atm, 760.00 torr, 14.696 psi, and 1.0133 bar.
Assumptions
- The pressure value you enter is an absolute pressure, not gauge pressure (unless you specify otherwise).
- Conversion factors are exact definitions, so they do not depend on temperature or gas identity.
- No correction is made for altitude, gravity, or liquid density in a manometer—those factors matter when you read a physical instrument, not when converting units.
What Is Gas Pressure and Why Does It Matter?
Gas pressure arises from countless molecules moving randomly and striking the container walls. Each collision transfers a tiny impulse; the sum of all collisions over a unit area gives the pressure. The kinetic theory of gases relates pressure to the number of molecules (n), temperature (T), and volume (V) through the ideal gas law: PV = nRT, where R is the gas constant. This is why pressure is a central variable in chemistry, meteorology, engineering, and medicine (e.g., blood gas measurements, scuba diving, and vacuum systems).
Pressure is also a state function: it describes the condition of a gas, not the amount. Two containers with the same pressure can hold very different numbers of molecules if volumes or temperatures differ.
Units of Pressure and Conversions
Several units are still in common use, which causes frequent confusion:
- Pascal (Pa) – the SI unit; 1 Pa = 1 N/m². Standard atmospheric pressure is 101,325 Pa.
- Atmosphere (atm) – originally defined as average sea-level pressure; now exactly 101,325 Pa.
- Torr and mmHg – 1 torr = 1/760 atm; mmHg is nearly identical (the difference is negligible for most lab work).
- Bar – 100,000 Pa, often used in meteorology and industry; 1 bar ≈ 0.987 atm.
- PSI – pounds per square inch, common in US engineering and tire gauges.
To convert between any two, use the factors above. For quick mental estimates: 1 atm ≈ 1.013 bar ≈ 14.7 psi ≈ 760 torr.
How Pressure Is Measured: Instruments
Different tools suit different ranges and accuracy needs:
- Manometer – a U-shaped tube filled with liquid (mercury or water). The pressure difference is read as the height difference (h) between the two columns. For a gas connected to one arm, P_gas = P_atm + ρgh (if the gas side is higher) or P_gas = P_atm − ρgh (if lower). Density ρ of the liquid and gravitational acceleration g matter.
- Barometer – measures absolute atmospheric pressure by balancing the weight of a mercury column against the air pressure. Standard sea-level reading is 760 mmHg.
- Mechanical gauges – Bourdon tube, diaphragm, or bellows gauges deform under pressure and move a needle. These read gauge pressure (difference from atmosphere) unless they are absolute gauges.
- Electronic sensors – strain gauges, capacitive, or piezoelectric sensors convert pressure into an electrical signal. They are used in digital barometers and car tire monitors.
- Pirani and ionization gauges – measure very low pressures (vacuum) by detecting heat loss or ion current, which depend on gas density.
For laboratory work, a manometer is simple and accurate if the liquid density is known and the temperature is controlled.
How to Choose the Right Measurement Method
Consider the pressure range, the required accuracy, and whether you need absolute or gauge pressure:
- For pressures near 1 atm (10⁵ Pa), a mercury manometer or a good digital barometer works.
- For high pressures (hundreds of atm), use a Bourdon gauge or a calibrated electronic transducer.
- For vacuum (below 1 Pa), use a Pirani gauge (0.1–1000 Pa) or an ionization gauge (below 10⁻³ Pa).
- If you only need the difference between two points (e.g., across a filter), use a differential manometer.
- If the reading must be absolute (independent of weather), choose an absolute pressure sensor, not a gauge that reads relative to ambient.
Also check the fluid in a manometer: water gives a large column height (10.3 m for 1 atm), while mercury gives a compact 760 mm. Use water only for low pressures and when you can tolerate a tall column.
Common Mistakes and Misconceptions
- Confusing gauge and absolute pressure. A tire gauge reads 2.2 bar, but the absolute pressure is 2.2 + 1.013 = 3.2 bar. Gas law calculations require absolute pressure.
- Ignoring temperature effects. A manometer reading changes with temperature because the liquid expands and the gas volume changes. Always record the temperature or use a temperature-compensated instrument.
- Using the wrong density for the manometer fluid. Mercury density is 13,534 kg/m³ at 20 °C; water is 998 kg/m³. Using the wrong value shifts the calculated pressure by a factor of 13.5.
- Assuming 1 atm is exactly 1 bar. They differ by about 1.3%, which can matter in precise work.
- Neglecting the hydrostatic head in a gas line. If a manometer is connected to a gas line with a vertical segment, the weight of the gas itself is usually negligible, but the liquid in the line is not.
Practical Tips for Accurate Readings
- Zero the gauge or manometer before connecting the gas.
- Ensure the manometer is vertical and read the meniscus at eye level.
- Record the temperature and, if needed, correct the liquid density.
- For electronic sensors, allow warm-up time and calibrate with a known pressure source.
- When using a barometer, remember that atmospheric pressure changes with altitude and weather; for gas law calculations use the local absolute pressure, not the standard value.
Safety and Scope
This page covers measurement arithmetic and general principles only. When working with pressurized gas in a lab, follow your lab method, the safety data sheet (SDS), and your supervisor. Never exceed the rated pressure of glassware or tubing—implosion or explosion can cause serious injury. For vacuum work, use proper shielding and leak-check all connections.
Frequently Asked Questions
What is the difference between gauge pressure and absolute pressure?
Gauge pressure is the pressure measured relative to the surrounding atmosphere. Absolute pressure is the total pressure, including atmospheric pressure. For example, a tire gauge reading 2.0 bar means the absolute pressure is about 3.0 bar (2.0 + 1.013). Gas law equations always use absolute pressure.
Why is mercury used in manometers instead of water?
Mercury is 13.5 times denser than water, so a mercury column is much shorter for the same pressure. One atmosphere pushes mercury up 760 mm, but water would need 10.3 meters. Mercury also has a low vapor pressure, so it doesn’t evaporate into the gas. However, mercury is toxic, so many labs use digital sensors or oil-filled manometers.
How do I convert a pressure reading from psi to pascals?
Multiply the psi value by 6894.76. For example, 30 psi × 6894.76 = 206,843 Pa (about 2.04 atm). Or use the calculator on this page by entering the value in pascals (which you get by multiplying psi by 6894.76).
Does gas pressure depend on the type of gas?
At the same temperature, volume, and number of molecules, all ideal gases exert the same pressure. Real gases deviate slightly due to intermolecular forces, but the differences are small at ordinary pressures. The pressure depends on the number of molecules, not their mass or size.
Why does a barometer reading change with altitude?
At higher altitude, there is less air above you, so the weight of the air column is smaller, and the pressure is lower. At the top of Mount Everest (8,848 m), atmospheric pressure is about 33.7 kPa (0.33 atm), compared to 101.3 kPa at sea level.
Can I measure gas pressure with a smartphone?
Many smartphones contain a barometer that measures absolute atmospheric pressure, typically with an accuracy of about ±1 hPa (100 Pa). You can use it to measure the current air pressure, but not the pressure inside a closed container unless you build a sealed chamber that changes the phone’s ambient pressure—which is not practical. For lab gas pressure, a dedicated manometer or gauge is needed.
Related
Formula used
in p | Pressure in pascals | Pa | 101325 | 0 | 10000000 out atm | Pressure in atmospheres | atm | p / 101325 | 4 out torr | Pressure in torr | torr | p * 760 / 101325 | 2 out psi | Pressure in psi | psi | p * 0.000145038 | 3 out bar | Pressure in bar | bar | p / 100000 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %