molecalculator

Moles & Molar Mass

Mn Atomic Number and Mass: Manganese Facts

Calculator No. 01-9696 · Updated · Formula and assumptions shown below

Amount of manganese 1.0000 mol
Number of Mn atoms
6.022 × 1023 atoms
Result, rounded to 2 decimal places
Mass of manganese
54.938 g
Set in the form below
Molar mass of Mn
54.938 g/mol
Set in the form below
You enter
Mass of manganese (g), Molar mass of Mn (g/mol)
You get
Amount of manganese (mol), Number of Mn atoms (atoms)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Manganese (Mn) has an atomic number of 25 and a standard atomic weight of 54.938 u (usually rounded to 54.94 for calculations). These two numbers define the element: the atomic number tells you it has 25 protons in its nucleus, and the atomic weight reflects the average mass of its naturally occurring isotopes, dominated by manganese-55.

Formula

The calculator above converts a mass of manganese into an amount in moles and then into a number of atoms. The two equations are:

  • n = m / M, where n is the amount in moles, m is the mass in grams, and M is the molar mass in g/mol.
  • N = n × NA, where N is the number of atoms and NA is Avogadro’s constant, 6.02214076 × 1023 mol−1.

For manganese, M = 54.938 g/mol, so 54.938 g of the element is exactly 1 mole, containing 6.022 × 1023 atoms.

Worked Example

Using the default values from the calculator (mass = 54.938 g, molar mass = 54.938 g/mol):

  1. n = 54.938 g / 54.938 g/mol = 1.0000 mol
  2. N = 1.0000 mol × 6.02214076 × 1023 atoms/mol = 6.022 × 1023 atoms

So 54.938 grams of manganese is one mole and contains Avogadro’s number of atoms. If you entered 10.0 g instead, you would get 0.1820 mol and 1.096 × 1023 atoms.

Assumptions

  • The atomic weight used is the IUPAC standard for natural terrestrial manganese.
  • The sample is pure elemental manganese, not a compound like MnO2.
  • Avogadro’s constant is exact as defined by SI.

Atomic Number: What It Means

The atomic number (Z = 25) is the number of protons in the nucleus. It is the element’s identity card—no other element has 25 protons. In a neutral manganese atom, there are also 25 electrons, arranged in the configuration [Ar] 3d5 4s2. That half-filled 3d subshell gives manganese its characteristic chemistry: it has a wide range of oxidation states, from +2 to +7, with +2 being the most stable in aqueous solution and +7 (as permanganate, MnO4−) being a powerful oxidizing agent.

Atomic Mass: Why 54.938 and Not a Whole Number

The atomic mass (54.938 u) is the weighted average of all natural isotopes. Manganese has only one stable isotope, 55Mn, which makes up essentially 100% of natural manganese. So why is the atomic weight not exactly 55? Because the mass of a nucleus is slightly less than the sum of its protons and neutrons—the famous “mass defect” that is converted into binding energy. A 55Mn nucleus contains 25 protons and 30 neutrons, but the total mass is 54.938 u, not 55 u. In practice, you can use 54.94 or even 55 for rough calculations, but for precise stoichiometry, use 54.938.

How to Use the Calculator

This calculator is for converting between mass and moles of pure manganese. Enter any mass (in grams) and it will tell you how many moles and how many atoms that represents. This is useful for:

  • Preparing solutions of manganese salts (e.g., MnCl2) where you need to know the amount of Mn ions.
  • Calculating yields in reactions that involve manganese metal or its compounds.
  • Understanding the scale of atomic quantities—for instance, a tiny 0.001 g speck of manganese still contains about 1.1 × 1019 atoms.

Remember that the molar mass of a manganese compound is different. For MnO2, it is 54.938 + 2 × 15.999 = 86.936 g/mol. The calculator only handles the element itself.

Common Mistakes and Misconceptions

  • Confusing atomic number with atomic mass: The atomic number (25) is the proton count; the mass number (55) is protons + neutrons for the most common isotope. Both are different from the atomic weight (54.938).
  • Rounding too early: Using 55 instead of 54.938 introduces an error of about 0.1%, which can matter in analytical work.
  • Forgetting that the atomic weight is an average: For elements with multiple isotopes, the atomic weight is not the mass of any single atom. Manganese is special because it has only one stable isotope, so the atomic weight is very close to the mass of that isotope.
  • Mixing up molar mass and atomic mass: They are numerically equal (both 54.938), but atomic mass is in u (per atom) and molar mass is in g/mol (per mole).

Manganese in the Real World

Manganese is an essential trace element for all forms of life. In humans, it is a cofactor for enzymes like superoxide dismutase and is important for bone formation and amino acid metabolism. The recommended daily intake is about 2.3 mg for adult men and 1.8 mg for adult women. Industrially, about 90% of manganese is used in steel production, where it removes sulfur and oxygen and adds strength. It is also used in dry-cell batteries (as MnO2), in aluminum alloys, and as a pigment in glass and ceramics. The name comes from the Latin magnes (magnet), because the mineral pyrolusite (MnO2) was once confused with magnetic iron ore.

Frequently Asked Questions

What is the mass number of manganese?

The mass number of the most common isotope is 55 (25 protons + 30 neutrons). The atomic mass is 54.938 u, which is slightly less than 55 due to nuclear binding energy.

How many neutrons does manganese have?

A neutral atom of 55Mn has 30 neutrons (55 − 25 = 30). Since there is only one stable isotope, virtually all natural manganese atoms have 30 neutrons.

Is manganese a metal or nonmetal?

Manganese is a transition metal. It is hard, brittle, and silvery-gray, and it exhibits multiple oxidation states, which is typical of transition metals.

What is the molar mass of manganese in g/mol?

The molar mass is 54.938 g/mol, numerically equal to the atomic weight in u. One mole of manganese atoms weighs 54.938 grams.

Why is manganese sometimes confused with magnesium?

Their names are similar, but they are different elements. Magnesium (Mg) has atomic number 12 and atomic mass 24.305, while manganese (Mn) has atomic number 25 and atomic mass 54.938. They also have different chemical properties—magnesium is an alkaline earth metal, manganese is a transition metal.

What is the oxidation state of manganese in KMnO4?

In potassium permanganate, manganese has an oxidation state of +7. This is its highest oxidation state, and the compound is a strong oxidizing agent commonly used in titrations.

Related

Formula used
in m | Mass of manganese | g | 54.938 | 0
in mm | Molar mass of Mn | g/mol | 54.938 | 0.001
out n | Amount of manganese | mol | m / mm | 4
out natoms | Number of Mn atoms | atoms | n * 6.02214076e23 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →