This page explains how to find the molar mass of sodium hydroxide (NaOH) and clarifies the common confusion between mass and volume—there is no “molar mass in mL” because molar mass is a mass-per-mole quantity, not a volume. You enter the mass of NaOH and the final solution volume to get the molarity (mol/L), which is the concentration you actually need for lab work.
Formula
The molar mass (M) of a compound is the sum of the atomic weights of its atoms, expressed in grams per mole (g/mol). For NaOH:
M(NaOH) = Ar(Na) + Ar(O) + Ar(H)
Using IUPAC abridged standard atomic weights: Na = 22.990, O = 15.999, H = 1.008.
M(NaOH) = 22.990 + 15.999 + 1.008 = 39.997 g/mol, usually rounded to 40.00 g/mol.
To find molarity (c) from mass and volume:
c (mol/L) = m (g) ÷ M (g/mol) ÷ (V (mL) ÷ 1000)
Where m is the mass of NaOH, M is its molar mass, and V is the final solution volume in milliliters (converted to liters by dividing by 1000).
Worked Example
Using the default values: 2.922 g of NaOH dissolved to a final volume of 250 mL.
Step 1: Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
Step 2: Calculate moles of NaOH: 2.922 g ÷ 40.00 g/mol = 0.07305 mol
Step 3: Divide moles by liters: 0.07305 mol ÷ 0.250 L = 0.2922 mol/L
The calculator displays 0.2922 mol/L (rounded to 4 decimals). In millimolar: 0.2922 × 1000 = 292.2 mM.
Assumptions
- NaOH is pure (no absorbed water or carbonate).
- The final volume is used, not the volume of solvent added—this matters because dissolving NaOH changes the total volume.
- The solution is at room temperature; molarity is temperature-dependent because volume changes slightly with temperature.
- Complete dissolution; no undissolved solid remains.
Why “Molar Mass in mL” Is a Misconception
Molar mass has units of grams per mole (g/mol), a ratio of mass to amount of substance. Volume (mL) is a separate dimension. You cannot convert g/mol to mL directly. What people often actually want is either:
- The molarity of a solution (mol/L), which requires mass, molar mass, and volume.
- The mass of NaOH needed to make a specific volume at a target molarity (m = M × c × V).
For example, to make 500 mL of 0.1 M NaOH: m = 40.00 g/mol × 0.1 mol/L × 0.500 L = 2.000 g. This is a mass, not a volume.
Common Mistakes When Preparing NaOH Solutions
The most frequent error is using the solvent volume instead of the final volume. If you add 250 mL of water to 2.922 g of NaOH, the final volume is slightly more than 250 mL (about 252–253 mL), making the actual molarity lower than intended. Always dissolve the solid in a portion of water, then bring the total volume up to the mark in a volumetric flask.
Another mistake is ignoring that solid NaOH absorbs moisture and carbon dioxide from air. A freshly opened bottle may be 98–99% pure, not 100%. For precise work, use a standard acid (like potassium hydrogen phthalate, KHP) to titrate and find the true concentration.
Rounding errors also appear: using 40.0 instead of 39.997 introduces a 0.0075% error, negligible for most work, but for high-precision titrations use the more exact value.
How to Choose the Right Molar Mass Value
For routine lab calculations, 40.00 g/mol is standard. For analytical work requiring four significant figures, use 39.997 g/mol. The difference matters when preparing standards for titration or when calculating yields in stoichiometry.
If your NaOH is not anhydrous (e.g., it has absorbed water), the effective molar mass per gram of your sample is higher because some mass is water. Weighing out “40 g” of wet NaOH gives fewer moles than intended. In such cases, determine purity first (by titration) and correct the mass accordingly.
Practical Tips for Making NaOH Solutions
- Use a clean, dry container; NaOH is hygroscopic.
- Weigh quickly and cap the bottle immediately after taking solid.
- Add NaOH pellets to water slowly with stirring—dissolution is exothermic.
- Cool the solution to room temperature before adjusting to the final volume.
- Store in a tightly sealed plastic bottle (NaOH attacks glass over time, forming sodium silicate).
Follow your lab method, the safety data sheet (SDS) and your supervisor.
Safety and Handling
NaOH is a strong base and corrosive. It can cause severe burns on contact with skin or eyes. Wear gloves and safety goggles. If spilled, neutralize with a weak acid (like vinegar or citric acid) and wipe up. Do not add water to solid NaOH—add solid to water to control heat. Work in a well-ventilated area to avoid inhaling any dust.
Frequently Asked Questions
What is the molar mass of NaOH exactly? The exact molar mass is 39.997 g/mol (Na 22.990 + O 15.999 + H 1.008). Most textbooks and lab manuals round this to 40.00 g/mol for convenience, which is accurate to three significant figures.
How do I convert grams of NaOH to mL? You cannot convert grams directly to mL without knowing the density of the solution. For a solid, density is irrelevant to molarity. If you mean how many mL of solution to use, you need the solution’s concentration: volume (mL) = (mass in g ÷ molar mass) ÷ molarity × 1000.
Why does the volume change when I dissolve NaOH? Dissolving NaOH in water causes the solution volume to increase slightly because the ions take up space and interact with water molecules. That’s why you must use a volumetric flask and adjust to the final mark rather than adding a fixed volume of water.
Is 40.00 g/mol the same as 39.997 g/mol? They differ by 0.003 g/mol (0.0075%). For making a 0.1 M solution, the difference is about 0.0003 g per liter—far smaller than typical weighing errors. Use 39.997 for analytical standards, 40.00 for general work.
Can I use this calculator for KOH or other bases? Yes, change the molar mass input. For KOH, use 56.11 g/mol (K 39.098 + O 15.999 + H 1.008). The calculation logic is identical for any soluble solid.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 40.00 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works