molecalculator

Moles & Molar Mass

Molar Mass of Zinc Nitrate: Formula and Calculation

Calculator No. 01-3639 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of anhydrous zinc nitrate, Zn(NO3)2, is 189.39 g/mol using standard atomic weights. Enter the number of zinc nitrate formula units and the calculator returns the corresponding mass in grams, with the molar mass shown as a reference value.

Formula

The molar mass is calculated by adding the atomic masses of every atom in the chemical formula. For zinc nitrate, Zn(NO3)2, one formula unit contains one zinc atom, two nitrogen atoms, and six oxygen atoms:

M = AZn + 2AN + 6AO

Using abridged standard atomic weights, this is 65.38 + 2(14.007) + 6(15.999) = 189.388 g/mol, or 189.39 g/mol when rounded to two decimal places. In the calculator, mass is m = n × M, where m is mass in grams, n is amount in moles, and M is molar mass in grams per mole. The formula-unit count is N = n × NA, using the exact Avogadro constant NA = 6.02214076 × 1023 mol−1.

The input n is the amount of anhydrous zinc nitrate in moles; its minimum is zero. The input mm is molar mass in g/mol, defaulting to 189.39 g/mol. The outputs are mass in grams and the number of formula units. Formula units are used for ionic compounds such as zinc nitrate; they are not individual molecules.

Worked Example

With the default amount of 1 mol and molar mass of 189.39 g/mol:

  1. Mass: m = n × M = 1 mol × 189.39 g/mol = 189.390 g, displayed to three decimal places as 189.390 g.
  2. Formula units: N = 1 mol × 6.02214076 × 1023 mol−1 = 6.02214076 × 1023, displayed to three decimal places as 6.022 × 1023 formula units.

Assumptions

  • The compound is anhydrous Zn(NO3)2, with no water of crystallization or other material included in its formula.
  • The default molar mass uses Zn = 65.38, N = 14.007, and O = 15.999 g/mol.
  • The calculation treats the stated amount as pure zinc nitrate. It does not correct for reagent purity, moisture, or a different hydrate.

What the Formula Means

Molar mass connects an amount measured in moles to a mass that can be measured on a balance. A value of 189.39 g/mol means that one mole of anhydrous zinc nitrate has a mass of about 189.39 g. It does not mean that one formula unit weighs 189.39 g: one formula unit is extraordinarily small, and the molar mass describes a mole, or 6.02214076 × 1023 formula units.

The parentheses in Zn(NO3)2 are important. The subscript 2 outside the parentheses multiplies the entire nitrate group, giving two nitrogen atoms and six oxygen atoms. Counting only one NO3 group would give an incorrect result. Zinc nitrate is an ionic compound, so its formula represents the simplest whole-number ratio of ions rather than a discrete molecule. The neutral formula contains one Zn2+ ion for every two NO3− ions.

Anhydrous Zinc Nitrate and Hydrates

A frequent source of conflicting answers is that zinc nitrate is also encountered as a hydrate. A hydrate includes water molecules in its crystal formula, and those waters add mass. For example, zinc nitrate hexahydrate is Zn(NO3)2·6H2O. Its molar mass is approximately 297.48 g/mol, not 189.39 g/mol: six waters contribute about 108.09 g/mol.

Use the molar mass that matches the formula printed for the particular material. If a label says hexahydrate, calculating a mass using the anhydrous value will underestimate the mass needed for a given number of moles. Conversely, a mass of hydrated material contains fewer moles of zinc nitrate than the same mass of anhydrous compound. The calculator’s molar-mass field can be edited, but the default specifically means the anhydrous form.

Using Molar Mass in Calculations

To convert moles to grams, multiply by molar mass. To convert grams to moles, rearrange the relationship: n = m ÷ M. For instance, 10.00 g of anhydrous zinc nitrate corresponds to 10.00 g ÷ 189.39 g/mol = approximately 0.05280 mol. For a hydrate, replace M with the hydrate’s molar mass before doing the conversion.

  • Check the formula: distinguish Zn(NO3)2 from Zn(NO3)2·6H2O.
  • Keep units consistent: grams divided by g/mol gives moles; moles multiplied by g/mol gives grams.
  • Keep sensible precision: do not report more meaningful digits than the weighed mass or other input supports. The displayed precision is a calculation format, not a guarantee of experimental accuracy.
  • Separate molar mass from concentration: molar mass alone does not tell you the molarity of a solution. Molarity also requires the amount dissolved and the final solution volume.

If using this arithmetic to plan bench work, follow your lab method, the safety data sheet (SDS), and your supervisor. Zinc nitrate is an oxidizing salt and can cause harm; consult the SDS for the specific material and follow the applicable handling and disposal rules.

Frequently Asked Questions

What is the molar mass of Zn(NO3)2?
The molar mass of anhydrous zinc nitrate is 189.39 g/mol using Zn = 65.38, N = 14.007, and O = 15.999 g/mol.

How many atoms are in one formula unit of zinc nitrate?
One formula unit has one zinc atom, two nitrogen atoms, and six oxygen atoms, for nine atoms in total.

Is zinc nitrate hexahydrate also 189.39 g/mol?
No. The six water molecules add mass, making zinc nitrate hexahydrate approximately 297.48 g/mol.

How many grams are in one mole of zinc nitrate?
One mole of anhydrous zinc nitrate has a mass of about 189.39 g. One mole of the hexahydrate has a mass of about 297.48 g.

Why is zinc nitrate described in formula units rather than molecules?
It is an ionic compound made of zinc and nitrate ions. Its chemical formula gives the ratio of those ions, rather than identifying separate covalent molecules.

Related

Formula used
in n | Amount of zinc nitrate | mol | 1 | 0
in mm | Molar mass of anhydrous zinc nitrate | g/mol | 189.39 | 0
out m | Mass of zinc nitrate | g | n * mm | 3
out N | Formula units | units | n * 6.02214076e23 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →