molecalculator

Moles & Molar Mass

Molecular Mass of Glucose: Exact Value & How to Find It

Calculator No. 01-10207 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular mass of glucose (C6H12O6) is 180.156 g/mol when calculated using standard atomic weights. This value is the sum of six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, and it is the number you use to convert between grams and moles of glucose in any chemistry calculation.

Formula

The molecular mass (M) of glucose is the sum of the atomic masses of all atoms in one molecule:

M(C6H12O6) = 6 × Ar(C) + 12 × Ar(H) + 6 × Ar(O)

Where:

  • Ar(C) = 12.011 g/mol (carbon)
  • Ar(H) = 1.008 g/mol (hydrogen)
  • Ar(O) = 15.999 g/mol (oxygen)

Plugging in the values: 6×12.011 + 12×1.008 + 6×15.999 = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

Worked Example

Suppose you need to prepare 250 mL of a 0.0649 M glucose solution. How many grams of glucose do you weigh out?

Using the formula: mass (g) = molarity (mol/L) × molar mass (g/mol) × volume (L)

Step 1: Convert volume to liters: 250 mL ÷ 1000 = 0.250 L

Step 2: Calculate moles of glucose: 0.0649 mol/L × 0.250 L = 0.016225 mol

Step 3: Convert moles to grams: 0.016225 mol × 180.156 g/mol = 2.922 g

So you weigh out 2.922 g of glucose, dissolve it in water, and bring the total volume to 250 mL. The calculator above performs the same calculation in reverse: enter 2.922 g, 180.156 g/mol, and 250 mL, and it returns 0.0649 mol/L (64.9 mM).

Assumptions

  • Atomic weights are the IUPAC abridged standard values (H 1.008, C 12.011, O 15.999).
  • The glucose is anhydrous (no water of crystallization).
  • The solution is dilute, so the volume of added solute is negligible compared to the final volume.
  • Final volume means the total volume after dissolving, not the volume of solvent added.

Why the Molecular Mass Matters

Glucose is a monosaccharide with the empirical formula CH2O, but its molecular formula is C6H12O6. The molecular mass (180.156 g/mol) is the bridge between the macroscopic world of grams and the microscopic world of moles and molecules. In the lab, you use it to:

  • Prepare solutions of known molarity (as shown above).
  • Convert between mass and moles in stoichiometric calculations, such as fermentation reactions (C6H12O6 → 2 C2H5OH + 2 CO2).
  • Calculate osmotic pressure, freezing point depression, or boiling point elevation of glucose solutions.

For example, a 5% glucose solution (5 g per 100 mL) has a molarity of about 0.278 M. That number comes directly from dividing 5 g by 180.156 g/mol and then by 0.1 L.

Common Mistakes and How to Avoid Them

One frequent error is using the empirical formula mass (30.03 g/mol) instead of the molecular mass. The empirical formula CH2O has a mass of 30.03 g/mol, but glucose contains six of those units, so you must multiply by 6. Another mistake is mixing up grams and milligrams when preparing solutions. Always check your units: if you measure glucose in milligrams, convert to grams before dividing by the molar mass.

Rounding too early also causes errors. If you round the atomic mass of carbon to 12 instead of 12.011, you get 180.0 g/mol instead of 180.156 g/mol. That 0.156 g/mol difference may seem small, but it adds up when you prepare large volumes or need precise concentrations for kinetics or cell culture work.

Finally, remember that glucose can exist as a monohydrate (C6H12O6·H2O) with a molar mass of 198.17 g/mol. If you use the monohydrate form and assume it is anhydrous, your solution will be about 10% less concentrated than intended. Check the label on your reagent bottle.

How to Read the Result

The calculator returns the molarity in mol/L (often written as M) and in millimolar (mM). A result of 0.0649 M means there are 0.0649 moles of glucose in every liter of solution. For biological work, millimolar is more common: 0.0649 M = 64.9 mM. To convert between them, multiply or divide by 1000.

If you enter a mass that is too large for the volume (for example, 500 g in 1 mL), the calculator will show a very high molarity, which is physically unrealistic because glucose solubility in water at 25 °C is about 910 g/L. The calculator does not check solubility, so you must be aware of the limits yourself. For most lab preparations, you will stay well below that limit.

Limits of the Formula

The molecular mass of glucose is an exact sum of atomic weights, but the atomic weights themselves are averages reflecting the natural isotopic composition of carbon, hydrogen, and oxygen. For most lab work, the IUPAC abridged values are precise enough. However, if you are doing isotope-labeling experiments with 13C-glucose, the molar mass will be different because the heavier isotope increases the mass of each carbon atom. Similarly, deuterated glucose (with 2H instead of 1H) has a higher molar mass. Always use the molar mass that matches the specific isotopic form you are working with.

Another limitation is that molarity is temperature-dependent because the volume of the solution changes with temperature. The calculator assumes 25 °C, but if you prepare a solution at a different temperature, the concentration will shift slightly. For most purposes this is negligible, but for high-precision work, prepare the solution at the same temperature where it will be used.

Frequently Asked Questions

Is the molecular mass of glucose 180 or 180.156? The exact value is 180.156 g/mol using standard atomic weights. Many textbooks round to 180 g/mol for convenience, but for precise calculations, especially in analytical chemistry, use 180.156 g/mol.

What is the difference between molecular mass and molar mass? Molecular mass is the mass of a single molecule in atomic mass units (u), while molar mass is the mass of one mole of molecules in grams per mole (g/mol). Numerically they are identical for glucose: 180.156 u and 180.156 g/mol.

How many moles are in 1 gram of glucose? Divide 1 g by 180.156 g/mol, which gives 0.00555 mol, or 5.55 mmol. That is about 3.34 × 1021 molecules (0.00555 × 6.022 × 1023).

Why is glucose’s empirical formula CH2O but its molecular formula is C6H12O6? The empirical formula shows the simplest whole-number ratio of atoms, which is 1:2:1 for carbon, hydrogen, and oxygen. The molecular formula shows the actual number of atoms in one molecule, which is six times that ratio. The molecular mass must be used for molar calculations because it reflects the true molecule.

Does glucose have the same molecular mass as fructose? Yes. Fructose also has the formula C6H12O6, so its molecular mass is also 180.156 g/mol. They are structural isomers, meaning they have the same atoms but arranged differently.

How do I prepare a 1 M glucose solution? Weigh out 180.156 g of anhydrous glucose, dissolve it in about 800 mL of distilled water, and then add water until the total volume reaches exactly 1 L. Mix well. Always add solute first, then adjust the final volume, because the solute adds to the volume.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →