An Oregon morphine equivalent dose (MED) calculator converts a prescription opioid’s dose into an equivalent amount of oral morphine, using the conversion ratios adopted by the Oregon Health Authority (OHA) for its opioid prescribing guidelines. You enter the opioid name, its strength (mg per tablet or mL), the number of units taken per day, and the calculator returns the total daily morphine milligram equivalents (MME). This page explains the OHA’s specific conversion factors, how to use the calculator correctly, and why the result matters for prescribing decisions, while making clear it is for educational and planning purposes only, not for clinical dosing.
Formula
The core calculation is straightforward multiplication:
Total daily MME (mg) = strength per unit (mg) × units per day × conversion factor
where:
- Strength per unit (mg): the amount of opioid in one tablet, capsule, or mL of liquid (for patches, use the patch’s hourly release rate in µg/hr, see below).
- Units per day: number of tablets, capsules, or mL taken in 24 hours.
- Conversion factor: the OHA multiplier that equates 1 mg of the opioid to a certain mg of oral morphine. For example, 1 mg oxycodone = 1.5 mg morphine, so the factor is 1.5.
For fentanyl patches, the OHA uses a different method: the patch’s release rate in µg/hr is converted using a factor of 2.4 (i.e., 1 µg/hr ≈ 2.4 mg oral morphine per day). So for a 25 µg/hr patch, the daily MME is 25 × 2.4 = 60 mg. The calculator above treats the strength input as the µg/hr value for fentanyl, so enter 25 as the strength and 1 as the units per day.
Worked Example
Using the default values: oxycodone 5 mg per tablet, 6 tablets per day, weight 70 kg.
- Identify the conversion factor for oxycodone: 1.5 (from OHA table).
- Multiply strength by units: 5 mg × 6 = 30 mg oxycodone per day.
- Multiply by conversion factor: 30 mg × 1.5 = 45 mg total daily MME.
- Per kg: 45 mg / 70 kg = 0.6429, rounded to 0.643 mg/kg/day.
The calculator shows 45.0 mg total MME and 0.643 mg/kg/day. This matches the OHA’s method: 30 mg oxycodone is considered equivalent to 45 mg oral morphine.
Assumptions
- Conversion factors are based on the Oregon Health Authority’s 2023 opioid prescribing guidelines, which align with CDC recommendations.
- All oral doses are assumed to be immediate-release (IR) unless specified; extended-release (ER) formulations use the same conversion factor but require careful total daily dose calculation.
- Methadone conversion is not linear: the factor depends on the daily dose. The OHA uses 4:1 for doses up to 20 mg/day, 8:1 for 21–40 mg, 12:1 for 41–60 mg, and 16:1 for >60 mg. The calculator uses 4 as a simplification; for higher methadone doses, use the appropriate factor manually.
- Fentanyl patch conversion assumes the patch is changed every 72 hours, but the MME is calculated per 24 hours based on the release rate.
- The result is a planning tool, not a substitute for clinical judgment, and must not be used to dose patients directly.
Why Oregon Uses MME
Oregon, like many states, uses MME to standardize opioid doses across different medications. The state’s prescription drug monitoring program (PDMP) and prescribing rules reference MME thresholds to identify patients at higher risk of overdose. For example, a daily MME of 90 mg or more is considered a high dose, and prescribers must document justification. The OHA’s conversion table is based on the CDC’s 2016 and 2022 guidelines, but Oregon has adopted specific factors that may differ slightly from other states or national calculators. Always use the current OHA table when practicing in Oregon.
How to Use the Calculator Correctly
To get an accurate MME, you need precise input data. Follow these steps:
- Determine the opioid and its formulation (IR vs ER, tablet vs liquid vs patch).
- Find the strength per unit on the prescription label or package insert.
- Count the actual number of units taken per day, not the prescribed amount if the patient is non-adherent.
- For liquid opioids, use the concentration (e.g., 5 mg/5 mL) and the total mL per day; enter the mg per mL as the strength.
- For patches, enter the release rate in µg/hr as the strength and 1 as the units per day.
- If the patient takes multiple opioids, calculate each one separately and sum the MMEs.
Common mistakes include forgetting to convert liquid concentrations, using the wrong conversion factor for methadone, or entering the patch dose as mg instead of µg/hr. Double-check the units before relying on the result.
Limitations and Safety
MME is an estimate, not an exact equivalence. It does not account for individual patient factors like renal or hepatic function, tolerance, or concurrent medications that affect opioid metabolism. The Oregon guidelines emphasize that MME is a screening tool, not a dosing formula. A patient on 90 MME may be safely managed if monitored, while a patient on 30 MME could be at risk due to other factors. Never use the calculator to make direct dose conversions for a patient; instead, use it to assess total opioid burden and trigger a clinical review. If you are a prescriber, consult the full OHA guideline and your patient’s history. This calculator is for educational and planning purposes only.
Comparison with Other States
Oregon’s conversion factors are similar to those in the CDC’s table, but some states like Washington use slightly different values. For instance, Washington’s calculator may use 1.5 for oxycodone and 4 for methadone as well, but the methadone dose-dependent factors can vary. The key difference is that Oregon’s PDMP automatically calculates MME for each prescription, and prescribers must respond to alerts when MME exceeds certain thresholds. Other states may have different thresholds (e.g., 50 MME vs 90 MME) for mandatory review. Always use the local state’s guidelines when practicing outside Oregon.
Frequently Asked Questions
How do I convert a fentanyl patch to MME?
For a fentanyl patch, use the release rate in µg/hr (e.g., 25, 50, 75, 100). Multiply that number by 2.4 to get the daily MME. For example, a 25 µg/hr patch = 60 MME/day. This is the OHA’s standard conversion.
What is the MME for methadone 30 mg per day?
Methadone conversion is dose-dependent. For 30 mg/day, the OHA factor is 8 (for doses 21–40 mg). So 30 mg × 8 = 240 MME. The calculator above uses 4, which is only correct for doses up to 20 mg/day. For higher doses, you must use the correct factor manually.
Can I use this calculator for tramadol?
Yes, the OHA lists tramadol with a conversion factor of 0.1. So 100 mg of tramadol equals 10 MME. However, tramadol also has a ceiling dose and serotonin effects, so MME alone does not capture its full risk profile.
Does the calculator account for extended-release formulations?
No, it assumes immediate-release. For extended-release opioids like OxyContin, you still use the same conversion factor, but you must enter the total daily dose correctly. For example, if taking 30 mg ER twice a day, enter strength 30 and units 2, which gives 90 MME (30×2×1.5).
What is the significance of the 90 MME threshold?
Oregon’s guidelines use 90 MME per day as a high-dose threshold. Above this, the risk of overdose increases substantially, and prescribers are expected to document why the dose is justified or to taper. The calculator helps you quickly see if a patient’s total opioid load exceeds this threshold.
Is MME the same as morphine equivalence for all opioids?
No, MME is a specific metric used for regulatory and safety purposes. It differs from equianalgesic tables used for switching opioids clinically, which often use different ratios. MME is designed to estimate overdose risk, not to guide direct dose conversion. Always use equianalgesic tables for actual opioid rotation.
Related
Formula used
in sel drug | Opioid | morphine=1, hydrocodone=1, oxycodone=1.5, methadone=4, fentanyl_patch=2.4, tramadol=0.1 in m | Strength per unit | mg | 5 | 0 in n | Units per day | - | 6 | 0 in w | Weight (kg) | kg | 70 | 0 out med | Total daily MME | mg | m * n * drug | 1 out medkg | MME per kg per day | mg/kg/day | med / w | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works