molecalculator

Moles & Molar Mass

Glucose Molar Mass: C6H12O6, Formula & Calculation

Calculator No. 01-9889 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of glucose (C6H12O6) is 180.156 g/mol. This is the mass of one mole of glucose molecules, calculated by summing the atomic weights of its constituent atoms: 6 carbon, 12 hydrogen, and 6 oxygen atoms.

Formula

The molar mass (M) of a compound is the sum of the standard atomic weights of each element multiplied by its number of atoms in the molecular formula:

M = (6 × AC) + (12 × AH) + (6 × AO)

  • AC = 12.011 g/mol (carbon)
  • AH = 1.008 g/mol (hydrogen)
  • AO = 15.999 g/mol (oxygen)

Plugging in the IUPAC abridged atomic weights: M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

Worked Example

Using the calculator defaults: you dissolve 2.922 g of glucose in enough water to make 250 mL of solution. What is the molarity?

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of glucose: 2.922 g ÷ 180.156 g/mol = 0.01622 mol
  3. Calculate molarity: 0.01622 mol ÷ 0.250 L = 0.06488 mol/L

The calculator gives 0.0649 mol/L (rounded to 4 decimals), and 64.88 mM. This matches the manual calculation.

Assumptions

  • The glucose is anhydrous (no water of crystallization).
  • The solution volume is the final volume after dissolving, not the volume of solvent added.
  • The atomic weights are the IUPAC abridged standard values; actual isotopic composition may vary slightly.

Why 180.156 g/mol Matters

Glucose is a monosaccharide with the empirical formula CH2O but the molecular formula C6H12O6. Its molar mass is a cornerstone for many lab calculations:

  • Preparing solutions: To make a 1 M glucose solution, you weigh out 180.156 g and dissolve to 1 L final volume.
  • Stoichiometry: In cellular respiration, glucose (C6H12O6) reacts with oxygen to produce CO2 and water. Knowing the molar mass lets you convert between grams of glucose and moles of reactants/products.
  • Concentration conversions: If you have a 5% (w/v) glucose solution, that means 5 g per 100 mL. The molarity is (5 g / 180.156 g/mol) / 0.1 L = 0.2775 M.

Common Mistakes and How to Avoid Them

One frequent error is using the atomic mass of hydrogen as 1 instead of 1.008, or oxygen as 16 instead of 15.999. While the difference is small, it can shift the molar mass by a few tenths of a gram, which matters for precise work. Another mistake is forgetting to convert mL to L when calculating molarity. Always divide the volume in mL by 1000 before using it in the molarity formula.

Also, be careful with hydrates. If you use glucose monohydrate (C6H12O6·H2O), its molar mass is 180.156 + 18.015 = 198.171 g/mol. Many commercial glucose preparations are anhydrous, but check the label.

How to Use the Calculator

This calculator helps you find the molarity of a glucose solution. Enter the mass of glucose in grams, the molar mass (default is 180.156 g/mol, but you can change it if using a different form), and the final solution volume in mL. The calculator returns the molarity in mol/L and in millimolar (mM). This is useful for preparing buffers, cell culture media, or any experiment where you need a specific glucose concentration.

For example, to make 500 mL of a 0.1 M glucose solution, you would need: mass = molarity × volume (L) × molar mass = 0.1 × 0.5 × 180.156 = 9.0078 g. The calculator can also be used in reverse: if you know the mass and volume, it gives you the concentration.

Limits of the Molar Mass Value

The value 180.156 g/mol is an average based on natural isotopic abundances. Carbon has isotopes 12C and 13C, and oxygen has 16O, 17O, and 18O. The IUPAC standard atomic weights reflect these abundances, but a specific sample might vary slightly. For most lab work, 180.16 g/mol is sufficient; for high-precision mass spectrometry, you would use the exact isotopic masses.

Also, the molar mass is for the free acid (neutral glucose) form. If you are working with a salt or derivative, the molar mass changes accordingly. Always confirm the exact compound you are using.

Frequently Asked Questions

What is the molar mass of glucose in g/mol?

The molar mass of glucose is 180.156 g/mol. This is the sum of 6 carbon atoms (72.066), 12 hydrogen atoms (12.096), and 6 oxygen atoms (95.994).

Is the molar mass of glucose the same as its molecular weight?

Yes, molar mass and molecular weight are often used interchangeably, though molar mass is technically the mass of one mole of a substance in grams per mole, while molecular weight is a dimensionless ratio. For practical purposes, they are numerically equal.

How do I calculate the molar mass of glucose from its formula?

Multiply the atomic weight of each element by the number of atoms in the formula: 6×12.011 + 12×1.008 + 6×15.999 = 180.156 g/mol. Use the periodic table for accurate atomic weights.

What is the difference between glucose and dextrose molar mass?

Dextrose is the common name for D-glucose, the same molecule. Therefore, the molar mass is identical: 180.156 g/mol. The term “dextrose” is often used in medical and food contexts, but chemically it is glucose.

Why is the molar mass of glucose important in biology?

Glucose is a primary energy source. Knowing its molar mass allows researchers to prepare defined media for cell culture, calculate metabolic rates, and quantify glucose consumption or production in biochemical assays. For example, a 5 mM glucose solution is common in experiments.

Can I use 180 g/mol instead of 180.156 g/mol?

Yes, for many applications, rounding to 180 g/mol is acceptable and introduces an error of less than 0.1%. However, for precise analytical work, use the full value. The difference matters when preparing very accurate standards or performing quantitative analysis.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →