molecalculator

Moles & Molar Mass

Neutron Mass vs Proton: Exact Comparison

Calculator No. 01-8377 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A neutron is slightly heavier than a proton: the neutron has a mass of about 1.00866491588 u (atomic mass units), while the proton has a mass of about 1.007276466621 u. That difference is roughly 0.0013884 u, which equals about 2.305 × 10−30 kg, or about 0.14% of the proton’s mass. This small but crucial difference is what makes atomic nuclei stable and enables the existence of elements heavier than hydrogen.

Formula

The calculator above compares the two masses directly. The key formula is simply:

Δm = mneutron − mproton

where:

  • mneutron = 1.00866491588 u (the mass of a free neutron)
  • mproton = 1.007276466621 u (the mass of a free proton)
  • Δm = the mass difference, about 0.0013884 u

To convert from atomic mass units (u) to kilograms, multiply by the atomic mass constant:

1 u = 1.66053906660 × 10−27 kg

So the mass difference in kilograms is:

Δm (kg) = (mneutron − mproton) × 1.66053906660 × 10−27

The ratio is simply mneutron / mproton ≈ 1.0013784.

Worked Example

Using the default values in the calculator:

  1. Proton mass = 1.007276466621 u
  2. Neutron mass = 1.00866491588 u
  3. Mass difference = 1.00866491588 − 1.007276466621 = 0.001388449259 u
  4. Convert to kg: 0.001388449259 × 1.66053906660 × 10−27 = 2.305 × 10−30 kg
  5. Ratio = 1.00866491588 / 1.007276466621 = 1.0013784

The calculator shows the mass difference as 0.001388 u, the kilogram value as 2.305 × 10−30 kg, and the ratio as 1.0013784.

Assumptions

  • The masses are for free, isolated particles at rest (not bound in a nucleus).
  • Atomic mass units (u) are based on the carbon-12 scale, where 1 u = 1/12 the mass of a carbon-12 atom.
  • The conversion factor 1 u = 1.66053906660 × 10−27 kg is the CODATA 2018 recommended value.

Why the Neutron Is Heavier

The neutron is made of one up quark and two down quarks (udd), while the proton is made of two up quarks and one down quark (uud). The down quark is slightly heavier than the up quark (about 4.8 MeV/c² vs 2.2 MeV/c² in the quark mass scheme), but that accounts for only a small part of the mass difference. Most of the neutron’s extra mass comes from the complex interactions of quarks and gluons inside the particle—the binding energy and the kinetic energy of the quarks contribute to the total mass via E = mc². In fact, the rest masses of the quarks make up only about 1% of the total mass of a nucleon; the rest is energy.

The mass difference between the neutron and proton is often quoted in energy units as about 1.293 MeV/c². This is the energy released when a free neutron decays into a proton, an electron, and an antineutrino (beta decay).

Why the Difference Matters

If the neutron were even slightly lighter than the proton, the neutron would not decay—it would be stable, and the proton would decay into a neutron. That would change the entire universe: hydrogen atoms would not exist, and the chemistry we know would be impossible. Conversely, if the neutron were much heavier, it would decay too quickly for nuclei to form. The actual small mass difference (about 0.14%) is what allows neutrons to be stable inside nuclei, held together by the strong nuclear force, while free neutrons decay with a half-life of about 10 minutes.

This mass difference also determines the energy released in nuclear reactions. For example, in nuclear fission or fusion, the mass of the products is slightly less than the mass of the reactants; that missing mass becomes energy. The neutron-proton mass difference is a key factor in the binding energy of nuclei.

How the Masses Are Measured

The masses of the neutron and proton are measured with extraordinary precision using mass spectrometry. For charged particles like the proton, a Penning trap can measure the cyclotron frequency of the particle in a magnetic field, giving a mass with a relative uncertainty of about 10−10. The neutron, being electrically neutral, cannot be trapped directly. Instead, its mass is determined from the mass of the deuteron (a proton plus a neutron bound together) and the binding energy of the deuteron, or from the beta decay of the neutron, using the energy-momentum conservation of the decay products.

The current accepted values (CODATA 2018) are:

  • Proton mass: 1.007276466621 u
  • Neutron mass: 1.00866491588 u

These are so precise that the difference is known to about 10 parts per trillion.

Common Misconceptions

A frequent misconception is that the neutron is made of a proton plus an electron. That was proposed in the early 20th century, but it is wrong. The neutron is a composite particle of quarks, not a proton-electron pair. The mass difference is not due to an electron (which weighs only about 0.00054858 u) but rather to the internal quark-gluon dynamics.

Another misconception is that the neutron is heavier because it has more quarks. Both have three quarks, but the down quark is heavier than the up quark. However, the quark mass difference (about 2.6 MeV/c²) is larger than the observed mass difference (1.293 MeV/c²), because the electromagnetic interaction also plays a role: the proton’s positive charge increases its energy slightly, making it a bit heavier than it would be without charge. The interplay between quark masses and electromagnetic energy results in the net 1.293 MeV/c² difference.

Practical Relevance in Chemistry and Physics

In chemistry, the neutron-proton mass difference is usually negligible for molar mass calculations. The atomic mass of an element is the weighted average of its isotopes, and the mass of a neutron is about 1.008665 u, while a proton is about 1.007276 u. For most purposes, both are approximated as 1 u. However, in nuclear physics and in precise mass spectrometry, the difference matters.

For example, when calculating the binding energy of a nucleus, you compare the mass of the nucleus to the sum of the masses of its individual protons and neutrons. The mass defect (difference) is converted to energy using E = mc². The neutron-proton mass difference is part of that calculation.

Frequently Asked Questions

Which is heavier, a neutron or a proton?

A neutron is heavier than a proton by about 0.0013884 u, which is about 2.305 × 10−30 kg. In energy terms, that is about 1.293 MeV/c².

Why is the neutron heavier if it has no charge?

The mass of a particle is not simply the sum of its quark masses. The neutron has a down quark instead of an up quark (compared to the proton), and the down quark is heavier. Also, the electromagnetic energy of the proton’s charge adds a bit of mass, but the quark mass difference dominates, making the neutron heavier overall.

How much heavier is a neutron than a proton in percentage?

The neutron is about 0.138% heavier than the proton. That is, the mass difference divided by the proton mass times 100: (0.0013884 / 1.0072765) × 100 ≈ 0.138%.

What is the mass of a neutron in kilograms?

A neutron has a mass of about 1.67492749804 × 10−27 kg. A proton has a mass of about 1.67262192369 × 10−27 kg.

Why does the neutron-proton mass difference matter for the universe?

If the neutron were lighter than the proton, the proton would decay into a neutron (plus particles), and hydrogen atoms would not be stable. That would prevent the formation of stars and life as we know it. The actual small difference allows neutrons to be stable in nuclei, enabling the existence of all elements heavier than hydrogen.

Can the neutron mass be measured directly?

Because the neutron is neutral, it cannot be trapped in a Penning trap like a charged particle. Its mass is derived from the masses of other particles (e.g., the deuteron) and the binding energy, or from the kinematics of neutron decay. The result is known to about 10−10 relative uncertainty.

Related

Formula used
in m | Proton mass | u | 1.007276466621 | 0
in n | Neutron mass | u | 1.00866491588 | 0
out diff | Mass difference (neutron − proton) | u | n - m | 6
out diffkg | Mass difference | kg | (n - m) * 1.66053906660e-27 | 30
out ratio | Neutron mass / proton mass | - | n / m | 8

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →