molecalculator

Moles & Molar Mass

Neutron Number vs Proton Number Graph Explained

Calculator No. 01-9300 · Updated · Formula and assumptions shown below

Mass number A = N + Z 12
Neutron-to-proton ratio N/Z
1.000
= Neutron number N ÷ Proton number Z
Position relative to stability
0.00
Result, rounded to 2 decimal places
Neutron number N
6
Set in the form below
You enter
Neutron number N, Proton number Z
You get
Mass number A = N + Z, Neutron-to-proton ratio N/Z, Position relative to stability
Rounding
0 dp · 3 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The neutron number vs proton number graph, often called the nuclear chart or Segrè plot, maps every known atomic nucleus by its neutron count (N) on one axis and proton count (Z) on the other. You enter any combination of N and Z, and the calculator below returns the mass number (A = N + Z), the neutron–proton ratio, and whether that combination falls on the line of stability, neutron-rich, or proton-rich side. This graph is the central organizing tool of nuclear physics, showing why some isotopes are stable and others decay.

Formula

The core relationship is simply the mass number:

A = N + Z

where:

  • A = mass number (total nucleons, unitless)
  • N = number of neutrons
  • Z = number of protons (also the atomic number)

The neutron-to-proton ratio is N/Z. The stability position is estimated by comparing the actual N/Z to the empirical line of stability for light nuclei, which roughly follows N ≈ Z for A < 40, then gradually rises to about 1.5 for heavy nuclei like lead (Z = 82, N = 126). The third output uses a simple linear approximation of the stability line: N_stable ≈ 1.0 × Z for Z ≤ 20, then N_stable ≈ 0.4 × Z + 12 for heavier nuclei. A positive value indicates neutron-rich (above the line), negative indicates proton-rich (below).

Worked Example

Take the default values: N = 6, Z = 6 (this is carbon-12, the most common carbon isotope).

First, the mass number: A = 6 + 6 = 12.

Next, the neutron-to-proton ratio: N/Z = 6 / 6 = 1.000.

For the stability position, since Z = 6 (≤ 20), the stable N is approximately Z = 6. The difference is N – Z = 6 – 6 = 0, so the output is 0.00, meaning exactly on the line of stability. This matches reality: carbon-12 is stable.

Now try carbon-14 (N = 8, Z = 6): A = 14, N/Z = 1.333, and the stability position is (8 – 6) / (0.4×6 + 1) = 2 / 3.4 ≈ 0.59, indicating neutron-rich. Carbon-14 is indeed radioactive, decaying by beta emission.

Assumptions

  • The stability line approximation is empirical and works best for Z between 1 and 82.
  • This is a geometric classification, not a prediction of exact decay modes or half-lives.
  • For Z = 0 (pure neutron), the ratio is undefined; the calculator rejects that input.
  • The line of stability is a band, not a single line; nuclei within a few units of it may still be stable or very long-lived.

Background: Why This Graph Exists

Every atomic nucleus is defined by two integers: protons (Z) and neutrons (N). Protons determine the element’s identity, but neutrons determine which isotope it is. For decades, physicists have cataloged thousands of nuclides—over 3,300 known, with only about 254 stable ones. The graph places each nuclide as a single point, with Z on the horizontal axis and N on the vertical axis. Stable nuclei cluster in a narrow, slightly curved band called the “valley of stability.” Radioactive nuclides lie on either side, and the graph visually explains why: nuclei with too many neutrons or too few protons are energetically unbalanced and decay toward the stable band.

How to Read the Graph

The graph is read like a map. The diagonal line N = Z runs from the origin up to about Z = 20; stable light nuclei sit right on it. Beyond that, the stable band bends upward—heavy nuclei need extra neutrons to overcome proton–proton electrostatic repulsion. For example, uranium-238 has Z = 92 and N = 146, giving an N/Z ratio of 1.59. If you pick a point above the stable band, that nuclide is neutron-rich and typically undergoes beta-minus decay (a neutron becomes a proton). Below the band, it is proton-rich and undergoes beta-plus decay or electron capture. The graph also shows “magic numbers” (2, 8, 20, 28, 50, 82, 126) where extra stability appears, creating gaps and irregularities in the band.

Common Mistakes and Misconceptions

A frequent error is confusing the graph with the periodic table. The periodic table orders elements by Z only; the neutron graph adds N as a second dimension, so each element appears as a horizontal row of isotopes. Another mistake is assuming all nuclides on the stable line are stable—the line is a region, and some nuclides near it are still radioactive with very long half-lives (e.g., bismuth-209, half-life 1.9×1019 years). Also, the N/Z ratio is not a constant; it increases with Z. Many students expect N = Z for all stable nuclei, but that only holds for light elements. Finally, the graph does not show binding energy directly; it shows the location of nuclides, and the depth of the “valley” (binding energy per nucleon) is a separate plot.

Why the Line of Stability Curves

The curve arises from two competing forces. The strong nuclear force attracts protons and neutrons equally and acts over a very short range, saturating with size. The electrostatic force repels protons over a longer range and grows with Z². For light nuclei, adding equal numbers of protons and neutrons maximizes binding because the strong force benefits from symmetry. As Z increases, proton repulsion becomes significant, so extra neutrons are needed to provide additional attractive force without adding more repulsion. This is why the N/Z ratio rises from 1.0 for carbon to about 1.3 for lead. The precise shape is also influenced by quantum shell effects, which create small dips and bumps in the stability line at magic numbers.

Practical Uses of the Graph

Nuclear physicists use the graph to plan experiments and predict decay modes. For example, if you want to produce a new superheavy element, you look for a target nuclide that, when fused with a projectile, lands near the expected island of stability (around Z = 114, N = 184). The graph also guides medical isotope production: technetium-99m (Z = 43, N = 56) sits just off the stable line and decays by gamma emission, which is why it is used in imaging. In astrophysics, the graph explains nucleosynthesis—the r-process (rapid neutron capture) moves nuclides far to the neutron-rich side, while the s-process (slow capture) follows the stable band. Even nuclear reactors rely on the graph to understand fission products, which are typically neutron-rich and decay through chains.

Limits of the Simple Approximation

The linear stability line used here is a crude teaching tool. Real stability is determined by the binding energy, which depends on pairing, shell structure, and the odd-even nature of N and Z. For example, even-even nuclides are more stable than odd-odd ones, so the stable band is actually split into two sub-bands. The approximation also fails for very light nuclei (Z < 6) where the line is less defined, and for extremely heavy nuclei beyond Z = 82 where stability is rare and the band becomes a narrow strip. For precise work, one uses the semi-empirical mass formula or evaluated nuclear data tables, not a simple ratio. But for understanding the basic shape and why isotopes decay, the N vs Z graph with a rough stability line is sufficient.

Frequently Asked Questions

Why do heavy nuclei have more neutrons than protons?

Because protons repel each other electrically, and this repulsion grows with the square of the atomic number. Neutrons add strong-force attraction without adding electrostatic repulsion, so heavier elements need a higher neutron-to-proton ratio to remain bound. For example, iron-56 has N/Z = 1.15, but uranium-238 has N/Z = 1.59.

What is the difference between the graph and the periodic table?

The periodic table is one-dimensional, listing elements by proton number only. The neutron-proton graph is two-dimensional, showing every isotope of every element. Each element appears as a horizontal row of points in the graph, one for each neutron count, whereas the periodic table shows only the most common or representative isotope.

How do I know if an isotope is stable from the graph?

If the point lies within the narrow stable band, it is likely stable or very long-lived. Points far above the band are neutron-rich and decay by beta-minus; points far below are proton-rich and decay by positron emission or electron capture. But the graph only gives a rough guide—exact stability requires consulting a table of nuclides with half-lives.

What is the “island of stability”?

It is a predicted region on the graph around Z = 114 and N = 184 where superheavy nuclei may have relatively long half-lives due to closed nuclear shells. The graph shows this as a small patch separated from the main stable band. While not yet confirmed for all predicted isotopes, it guides searches for new elements.

Can the graph predict the exact decay mode?

No, it only indicates whether a nuclide is neutron-rich or proton-rich, which suggests the dominant decay type. Exact decay modes, branching ratios, and half-lives depend on energy differences and quantum selection rules, so they require detailed nuclear models or measured data. The graph is a first-order classification, not a complete prediction.

Why is the line of stability not a straight line?

Because the balance between the strong force and electromagnetic force changes with size. For small nuclei, the strong force dominates and symmetry favors N = Z. As size increases, proton repulsion grows faster than the strong force’s reach, so more neutrons are needed. The curve reflects this gradual shift, plus quantum shell effects that add local irregularities.

Related

Formula used
in n | Neutron number N | - | 6 | 0
in z | Proton number Z | - | 6 | 0
out a | Mass number A = N + Z | - | n + z | 0
out ratio | Neutron-to-proton ratio N/Z | - | n / z | 3
out side | Position relative to stability | - | (n - z) / (0.4 * z + 1) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →