molecalculator

Moles & Molar Mass

Normal Distribution Problems: Solutions & Examples

Calculator No. 01-7973 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This guide walks through the most common types of normal distribution problems—finding probabilities, percentiles, and cutoff values—and shows you exactly how to solve them using z-scores and the standard normal table. You’ll get step-by-step solutions for real examples, plus a calculator to check your own work instantly.

Formula

The normal distribution is described by its probability density function:

f(x) = (1 / (σ √(2π))) · e−(x − μ)² / (2σ²)

where:

  • x = the value of interest
  • μ (mu) = the mean of the distribution
  • σ (sigma) = the standard deviation
  • π ≈ 3.14159 and e ≈ 2.71828

To solve problems, you convert any normal distribution to the standard normal distribution (mean 0, standard deviation 1) using the z-score:

z = (x − μ) / σ

The z-score tells you how many standard deviations x is above (positive) or below (negative) the mean. Then you use a z-table or a calculator to find the probability that a randomly chosen value falls below that z-score.

Worked Example

Suppose test scores follow a normal distribution with mean μ = 70 and standard deviation σ = 10. What is the probability that a randomly selected score is less than 85?

  1. Compute the z-score: z = (85 − 70) / 10 = 15 / 10 = 1.5
  2. Look up z = 1.5 in the standard normal table (or use the calculator). The cumulative probability is 0.9332.
  3. Interpret: P(X < 85) = 0.9332, so about 93.3% of scores are below 85.

Using the calculator with x = 85, μ = 70, σ = 10, you get z = 1.5 and probability = 0.933193 (rounded to 0.933193), which matches the table value (0.9332) to four decimal places.

Assumptions

  • The variable is continuous and follows a normal distribution.
  • The mean and standard deviation are known (or estimated from a large sample).
  • The z-table or the error function used here assumes a perfectly normal curve.

Types of Normal Distribution Problems

Most textbook problems fall into one of four categories. Once you recognize the type, the solution method becomes straightforward.

  • Finding probability given a value: You are given x, μ, and σ and asked for P(X < x) or P(X > x). Compute z and look up the cumulative probability.
  • Finding a value given a probability (percentile): You are given the probability (e.g., top 10%) and need to find x. Find the z-score that corresponds to that probability, then solve x = μ + zσ.
  • Finding probability between two values: Compute z for both x values, find the cumulative probabilities, and subtract the smaller from the larger.
  • Finding the mean or standard deviation: Given a probability and one of the parameters, use the z-score equation to solve for the unknown.

Step-by-Step Solution Strategy

Follow these steps for any normal distribution problem:

  1. Sketch the curve and shade the area you need (left tail, right tail, or middle).
  2. Convert to z-score using z = (x − μ) / σ.
  3. Find the cumulative probability from the z-table (or calculator).
  4. Adjust for the tail: For P(X > x), subtract the cumulative probability from 1. For between, subtract the smaller cumulative from the larger.
  5. Interpret the result in the context of the problem.

Example: What proportion of scores are above 85 in the earlier example? P(X > 85) = 1 − 0.9332 = 0.0668, so about 6.7% of scores exceed 85.

Common Mistakes and Misconceptions

Even advanced students make these errors. Watch for them:

  • Using the wrong tail: For “greater than,” you must subtract the cumulative from 1. For “less than,” use the cumulative directly.
  • Forgetting to subtract for “between” problems: The area between two values is the difference of the two cumulative probabilities, not the sum.
  • Mixing up μ and σ: The z-score formula subtracts the mean, then divides by the standard deviation. Reversing them gives a nonsense result.
  • Rounding too early: Round z-scores to at least 2 decimal places before looking up the table. If you round 1.456 to 1.5, you lose accuracy.
  • Assuming normality: The normal model only works if the data are actually normally distributed. For small samples or skewed data, use other methods.

Real-World Applications

Normal distribution problems appear in many fields. Here are a few concrete examples:

  • Quality control: A machine fills bags of flour with mean weight 500 g and σ = 5 g. What fraction of bags weigh less than 490 g? z = (490−500)/5 = −2, P(Z < −2) = 0.0228, so about 2.3% of bags are underfilled.
  • Exam scores: If a teacher wants to give an A to the top 5% of students, and scores have μ = 70, σ = 10, what score is needed? The z-score for the 95th percentile is 1.645, so x = 70 + 1.645(10) = 86.45. A student needs about 86.5.
  • Biology: The heights of adult women in a population are normally distributed with μ = 162 cm, σ = 6 cm. What proportion are taller than 170 cm? z = (170−162)/6 = 1.333, P(Z > 1.333) = 0.0912, so about 9.1%.

Using the Standard Normal Table

The z-table (or standard normal table) gives the cumulative probability for a given z-score. Here’s how to use it:

  • For z = 1.50, find the row for 1.5 and the column for 0.00; the value is 0.9332.
  • For z = −0.75, find the row for −0.7 and the column for 0.05; the value is 0.2266.
  • For z = 2.05, find 2.0 and 0.05; the value is 0.9798.

If you need a probability not in the table, interpolate or use a calculator. The calculator on this page uses the error function for full precision.

Frequently Asked Questions

How do I find the probability that X is greater than a value?
Compute the z-score, then subtract the cumulative probability from 1. For example, if z = 1.5 and P(Z < 1.5) = 0.9332, then P(X > x) = 1 − 0.9332 = 0.0668.

What is the difference between a z-score and a raw score?
A raw score is the original data value (x). A z-score standardizes it: z = (x − μ)/σ. The z-score tells you how many standard deviations the raw score is from the mean, allowing comparison across different normal distributions.

How do I find the value that corresponds to a given percentile?
Find the z-score that has that cumulative probability (e.g., for the 90th percentile, z = 1.282). Then solve x = μ + zσ. For example, with μ = 100 and σ = 15, the 90th percentile is 100 + 1.282(15) = 119.23.

Can I use the normal distribution for any data set?
No. The normal model is only appropriate if the data are approximately symmetric and bell-shaped. For skewed data or small samples, use other distributions (e.g., t-distribution) or nonparametric methods.

What is the empirical rule?
The empirical rule states that for a normal distribution, about 68% of data falls within 1 standard deviation of the mean, 95% within 2, and 99.7% within 3. It’s a quick estimate but not exact; use z-tables for precise probabilities.

Why do we use the standard normal distribution instead of the original?
Because the standard normal has a fixed mean (0) and standard deviation (1), so a single table works for all normal distributions. Converting to z-scores makes probabilities comparable and simplifies calculations.

Limitations and When Not to Use

The normal distribution is a powerful model, but it has limits:

  • Skewed data: If the data are heavily skewed (e.g., income, reaction times), the normal model underestimates tail probabilities.
  • Discrete data: For counts (e.g., number of defects), use the binomial or Poisson distribution, though the normal can approximate when counts are large.
  • Small samples: When estimating the mean from a small sample, use the t-distribution instead of the normal.

Always check the shape of your data before applying the normal model.

Related

Formula used
in x | Value (x) | - | 85 | -999999
in mu | Mean (μ) | - | 70 | -999999
in sigma | Standard deviation (σ) | - | 10 | 0.000001
out z | Z-score | - | (x - mu) / sigma | 4
out prob | Probability P(X < x) | - | 0.5 * (1 + erf(z / sqrt(2))) | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →