molecalculator

Moles & Molar Mass

Particles to Mass Calculator: Formula and Examples

Calculator No. 01-2587 · Updated · Formula and assumptions shown below

Mass 18.0150 g
Amount of substance
1.0000 mol
Result, rounded to 4 decimal places
Number of particles
602214075999999987023872 particles
Set in the form below
Molar mass
18.015 g/mol
Set in the form below
You enter
Number of particles (particles), Molar mass (g/mol)
You get
Mass (g), Amount of substance (mol)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Convert a number of particles to mass with this calculator by entering the particle count and the substance’s molar mass. It returns the amount in grams; the calculation uses Avogadro’s constant to convert particles to moles, then molar mass to convert moles to mass.

Formula

The particles-to-mass formula is:

m = (N / NA) × M

  • m is mass, in grams (g).
  • N is the number of particles, a count with no physical unit.
  • NA is Avogadro’s constant: exactly 6.02214076 × 1023 particles per mole (particles/mol).
  • M is molar mass, in grams per mole (g/mol).

The intermediate amount is n = N / NA, measured in moles. Multiplying moles by g/mol gives grams. The calculator’s second output displays that intermediate amount so you can see how the conversion works.

Worked Example

The defaults represent 6.02214076 × 1023 particles with a molar mass of 18.015 g/mol. That particle count is one mole according to the exact value of Avogadro’s constant.

  1. Convert particles to moles: n = N / NA = (6.02214076 × 1023 particles) / (6.02214076 × 1023 particles/mol) = 1 mol.
  2. Convert moles to mass: m = n × M = 1 mol × 18.015 g/mol = 18.015 g.

Result: 18.0150 g, or 1.0000 mol. The displayed mass is rounded to four decimal places.

Assumptions

  • The entered count refers to the particles corresponding to the supplied molar mass—for example, molecules when using a molecular molar mass.
  • The particles are treated as identical entities of one specified substance; the calculation does not account for mixtures or impurities.
  • The molar mass is supplied in g/mol and applies to the intended chemical formula and isotopic composition.
  • This is a mathematical conversion, not a measurement of sample purity or a laboratory procedure.

What Counts as a Particle?

“Particle” is a general word, not a single chemical entity. Depending on the question, the count might refer to atoms, molecules, ions, formula units, or another defined entity. The molar mass must match what is counted. For example, if a count refers to water molecules, use the molar mass of H2O, about 18.015 g/mol. If it refers to hydrogen and oxygen atoms counted separately, those atoms have different molar masses and should be calculated separately.

Ions and ionic solids need the same care. A count of sodium ions calls for the molar mass of sodium atoms/ions (the electron’s mass is negligible for ordinary molar-mass calculations), whereas a count of sodium chloride formula units calls for the molar mass of NaCl, about 58.44 g/mol. Do not use a compound’s molar mass for a count of only one kind of atom within that compound.

Finding the Right Molar Mass

Molar mass is the mass of one mole of the specified chemical entities. For a pure compound, calculate it by adding the standard atomic weights for each atom in its chemical formula. Using abridged standard atomic weights, water is approximately:

H2O: (2 × 1.008) + 15.999 = 18.015 g/mol.

For sodium chloride, NaCl: 22.990 + 35.45 = 58.44 g/mol. Use a reliable periodic table or a stated molar-mass convention when more precision is needed. Isotopic composition can affect the molar mass; a sample enriched in a particular isotope may not have the usual natural-abundance value. For a mixture, there is no one molar mass that converts a total particle count to mass unless the mixture’s composition and the meaning of the count are specified.

Using the Result and Checking Units

The result scales directly with both inputs: doubling the particle count doubles the mass, and doubling the molar mass doubles the mass for the same count. A count equal to Avogadro’s constant corresponds to one mole, so its mass in grams is numerically equal to the molar mass in g/mol.

For very large counts, scientific notation is easier to read. For instance, 1.204428152 × 1024 molecules is 2 mol because it is twice Avogadro’s constant. With water’s molar mass, the mass is 2 mol × 18.015 g/mol = 36.030 g.

  • Enter a particle count, not a mass or a number of moles. If you already know moles, multiply them directly by molar mass.
  • Check that the count and molar mass refer to the same entity, such as molecules with molecular molar mass.
  • Use g/mol for molar mass to obtain grams. For an answer in kilograms, divide the result in grams by 1,000.
  • Keep full precision through intermediate steps where possible, then round the final answer to a sensible number of significant figures.

Limits and Common Misconceptions

This equation converts a specified count to a theoretical mass; it does not determine how many particles are actually present in a real sample. That requires measurement or other information. Nor does a particle count automatically tell you the amount of material in a visible object: a sample may contain multiple substances, and experimental samples may have impurities or variable composition.

A frequent error is to treat “particles” as interchangeable with “moles.” They are related but not identical: a mole is a fixed amount containing 6.02214076 × 1023 specified entities. Another error is to use molar mass as though it were mass per particle. The mass of one particle can be estimated by dividing its molar mass by Avogadro’s constant, but the formula here first converts the count to moles and then multiplies by molar mass.

Frequently Asked Questions

How do I convert particles to mass?
Divide the particle count by 6.02214076 × 1023 to get moles, then multiply by molar mass in g/mol. The answer is in grams.

What is the formula for particles to grams?
Use m = (N / NA) × M, where N is the particle count, NA is Avogadro’s constant, and M is molar mass in g/mol.

How many particles are in one mole?
One mole contains exactly 6.02214076 × 1023 specified entities, such as atoms or molecules.

Can I convert atoms to mass?
Yes. Use the molar mass for the element whose atoms are counted. If the atoms are part of a compound but the count is for compound molecules, use the compound’s molar mass instead.

What if I know moles instead of particles?
Multiply the number of moles by molar mass in g/mol. You only need the particle-count step when starting with a number of particles.

Related

Formula used
in n | Number of particles | particles | 6.02214076e23 | 0
in mm | Molar mass | g/mol | 18.015 | 0.001
out m | Mass | g | n / 6.02214076e23 * mm | 4
out mol | Amount of substance | mol | n / 6.02214076e23 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →