molecalculator

Moles & Molar Mass

PCB Calculator With Allowance: Estimate Take-Home Pay

Calculator No. 01-3085 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A PCB calculator with allowance estimates monthly Potongan Cukai Bulanan (PCB), Malaysia’s Monthly Tax Deduction, using employment income and relevant relief details. This planning calculator estimates a deduction; the actual amount depends on current Inland Revenue Board of Malaysia (LHDN) rules, your tax status, and payroll records.

Formula

This simplified calculator estimates annual chargeable income, applies selected progressive tax bands, subtracts any rebate entered, then divides the estimated balance by 12:

  • Annual income, I = annual salary + annual taxable allowances + annual bonus and other taxable pay, in RM.
  • Estimated chargeable income, C = max(0, I − entered annual tax reliefs), in RM.
  • Estimated annual tax, T = 1% of the part of C from RM5,000 to RM20,000, plus 1% of the part from RM20,000 to RM30,000, plus 3% of the part from RM30,000 to RM45,000, plus 8% of the part above RM45,000. The first RM5,000 is treated as zero in this simplified illustration.
  • Estimated monthly PCB, P = max(0, (T − entered annual rebates) ÷ 12), in RM per month.

The expression in the calculator implements the same bands using RM5,000, RM12,000, RM22,000 and RM37,000 thresholds because the progressive rates apply to taxable slices, rather than to the entire income at one rate. It is a deliberately simplified estimate, not an official payroll formula or a substitute for LHDN’s current PCB calculation method. Tax rules, bands, eligibility and payroll treatment can change; the user must check current official guidance.

Worked Example

Using exactly the default inputs: annual salary RM60,000, taxable allowances RM6,000, bonus RM0, reliefs RM9,000 and rebates RM0.

  1. Annual income: I = RM60,000 + RM6,000 + RM0 = RM66,000.
  2. Estimated chargeable income: C = max(0, RM66,000 − RM9,000) = RM57,000.
  3. Tax on the RM5,000–RM12,000 slice: RM7,000 × 1% = RM70.00.
  4. Tax on the RM12,000–RM22,000 slice: RM10,000 × 1% = RM100.00.
  5. Tax on the RM22,000–RM37,000 slice: RM15,000 × 3% = RM450.00.
  6. Tax above RM37,000: (RM57,000 − RM37,000) × 8% = RM1,600.00.
  7. Estimated annual tax: RM70.00 + RM100.00 + RM450.00 + RM1,600.00 = RM2,220.00.
  8. Estimated monthly PCB: (RM2,220.00 − RM0) ÷ 12 = RM185.00 per month.

Assumptions

  • This is a simplified estimate using illustrative progressive bands, not the official LHDN PCB formula.
  • All income, relief and rebate entries are annual RM amounts; allowances and bonuses are entered only if taxable under applicable rules.
  • The relief and rebate inputs are amounts the user has independently confirmed apply to their circumstances.
  • The estimate divides annual tax evenly across 12 months and does not account for payroll-specific adjustments, prior deductions, or changes during the year.

How allowances affect PCB

An allowance is not automatically tax-free simply because it is labelled an allowance. Its treatment depends on the type of payment and applicable tax rules. Regular cash allowances may be taxable, while some reimbursements, benefits or qualifying items may receive different treatment. Confirm the classification with payroll or current LHDN guidance before entering it.

For example, if you receive RM500 each month in an allowance that is taxable, its annual amount is RM6,000. Add RM6,000 to annual taxable allowances rather than entering just RM500. If it is not taxable under the rules that apply to you, do not include it as taxable income. Do not include the same payment both in salary and in allowances.

PCB is a withholding mechanism: an amount is deducted from salary and credited toward income tax. It is not necessarily the final tax bill. When you file an income tax return, the final amount can differ because of the full-year income, reliefs, rebates, deductions, tax residency, and other relevant details. Depending on the final assessment, a person may owe more or may be due a refund.

How to use the estimate

  • Enter gross annual salary, not monthly take-home pay.
  • Add the annual value of allowances that you have established are taxable.
  • Include a bonus or other taxable pay in the separate field. If the amount is uncertain, calculate a low and high scenario rather than treating a guess as exact.
  • Enter only reliefs and rebates that apply to your tax situation. Reliefs reduce chargeable income; rebates reduce tax after it is calculated, so they are not interchangeable.
  • Compare the result with the payslip and official calculation tools or current payroll guidance. Keep records of the assumptions used.

The displayed PCB is an annual estimate divided evenly by 12. Actual monthly deductions need not be equal: payroll calculations may account for previous deductions, irregular pay, changes to salary, and official adjustment rules. This calculator does not determine eligibility for any relief, exemption or rebate.

Common mistakes and limits

A frequent error is entering net pay instead of gross taxable pay. Net pay already reflects deductions and cannot be used as a reliable substitute for annual income. Another is entering a monthly figure where the calculator requests an annual total; multiply a recurring monthly amount by 12 when it applies for the full year.

Do not assume that every allowance is taxable or that every allowance is exempt. Do not treat a tax relief as a rebate: a relief usually changes the income on which tax is calculated, while a rebate is applied to tax itself. Rounding can also create small differences from payroll results, and the simplified bands in this tool do not model every official rule or circumstance.

The estimate is most useful for rough budgeting and checking the impact of a possible pay change. It cannot provide a legally authoritative tax result. If your income includes multiple jobs, substantial variable pay, unusual benefits, or a change in tax status, use current official guidance or ask a qualified tax professional.

Frequently Asked Questions

Does PCB include allowances?
It can, when an allowance is taxable under the rules that apply to the payment. The word “allowance” alone does not determine tax treatment; confirm the classification before adding it.

Should I enter monthly or annual salary?
Enter annual gross salary in RM. For a fixed monthly salary paid for 12 months, multiply the monthly amount by 12.

Is PCB the same as final income tax?
No. PCB is tax withheld during the year. Your final tax is determined from your complete tax return and applicable rules, and may result in additional tax due or a refund.

Why is this calculator different from my payslip?
This tool uses simplified bands and divides its estimate evenly across a year. Payroll may use the official current PCB method and account for cumulative pay, earlier deductions, irregular income and personal details.

Where can I confirm the right PCB amount?
Check the current LHDN guidance or official PCB calculator and ask your payroll department how taxable allowances and other pay were handled. Use this estimate for planning, not as an official assessment.

Related

Formula used
in s | Annual salary | RM | 60000 | 0
in a | Annual taxable allowances | RM | 6000 | 0
in b | Annual bonus and other taxable pay | RM | 0 | 0
in r | Annual tax reliefs entered | RM | 9000 | 0
in z | Tax rebates entered | RM | 0 | 0
out t | Estimated annual tax before rebates | RM | max(0, max(0, s + a + b - r - 37000) * 0.08 + max(0, min(15000, s + a + b - r - 22000)) * 0.03 + max(0, min(10000, s + a + b - r - 12000)) * 0.01 + max(0, min(5000, s + a + b - r - 5000)) * 0.01) | 2
out p | Estimated monthly PCB | RM/month | max(0, (t - z) / 12) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →