molecalculator

Moles & Molar Mass

PCB Calculator With OT: Estimate Overtime Pay

Calculator No. 01-3087 · Updated · Formula and assumptions shown below

Estimated PCB on monthly pay 175.00 RM/month
Pay after estimated PCB
3,325.00 RM/month
Result, rounded to 2 decimal places
Monthly basic salary
3000 RM/month
Set in the form below
Monthly overtime pay
500 RM/month
Set in the form below
You enter
Monthly basic salary (RM/month), Monthly overtime pay (RM/month), Monthly bonus or other taxable pay (RM/month), Estimated effective deduction rate (%)
You get
Estimated PCB on monthly pay (RM/month), Pay after estimated PCB (RM/month)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A PCB calculator with OT estimates monthly Malaysian Potongan Cukai Bulanan (PCB), also called Monthly Tax Deduction (MTD), when your pay includes overtime. Enter the relevant salary, overtime pay and tax details to estimate a deduction; the result is a planning figure, not an official tax assessment.

Formula

This simple estimate applies an assumed effective deduction rate to the total monthly pay entered:

Estimated PCB = (basic salary + overtime pay + other taxable pay) × deduction rate ÷ 100

  • Basic salary (m): monthly salary in Malaysian ringgit (RM).
  • Overtime pay (ot): overtime earnings for that month in RM.
  • Other taxable pay (b): other taxable monthly earnings included for this estimate, in RM.
  • Deduction rate (r): an assumed effective percentage, from 0% to 100%.

The second output subtracts this estimated deduction from the entered pay total. The calculator does not implement the official Malaysian PCB/MTD payroll calculation. Its rate is an input, not a statutory rate or a rate inferred from salary. Actual PCB can depend on annual income, employee and spouse circumstances, eligible reliefs, prior deductions, bonus treatment and current Inland Revenue Board of Malaysia (LHDN) rules.

Worked Example

Using the calculator defaults—RM3,000 basic salary, RM500 overtime, RM0 other taxable pay and a 5% assumed rate:

  1. Total entered monthly pay = RM3,000 + RM500 + RM0 = RM3,500.
  2. Estimated PCB = RM3,500 × 5 ÷ 100 = RM175.00.
  3. Estimated pay after this deduction = RM3,500 − RM175 = RM3,325.00.

The calculator therefore displays an estimated PCB of RM175.00 per month. This is only the result of the example rate. It does not establish that an employee’s lawful or employer-calculated deduction should be RM175.

Assumptions

  • The entered amounts are monthly figures in RM and are non-negative.
  • All three pay fields are treated as taxable pay for this simplified estimate.
  • The deduction rate is supplied by the user and held constant for the month.
  • No official tax tables, annualization, reliefs, rebates, deductions or employee-specific circumstances are applied.
  • The pay-after-PCB figure subtracts only this estimate; it is not take-home pay after other payroll deductions.

What PCB and OT Mean

In Malaysia, PCB is the Malay abbreviation for Potongan Cukai Bulanan, the monthly tax deduction employers generally withhold from employment income and remit under the applicable system. English-language payroll materials commonly call it MTD. “OT” usually means overtime: pay for eligible hours worked beyond ordinary hours, according to the employee’s terms and the relevant employment rules.

The phrase “PCB calculator with OT” can refer to two different things: a calculator that includes overtime in a rough pay estimate, or an official payroll calculation that determines the correct withholding. This page does the first. Including overtime in the entered earnings does not reproduce the second. Overtime may vary month to month, and other payment types—such as bonuses or commissions—may have their own payroll treatment.

How to Use the Estimate

  • Enter the gross basic salary for the month, before deductions.
  • Enter the gross overtime amount paid in that same month. Use 0 if there was no OT.
  • Add other taxable earnings only if you have a reasonable basis for including them in this simplified total. Do not include the same amount twice.
  • Enter an assumed percentage from a reliable payroll estimate if you want a rough illustration. If you do not know the appropriate rate, the calculator cannot determine it for you.
  • Compare the result with your payslip and the employer’s payroll calculation; ask payroll to explain any difference.

For example, if monthly basic pay is RM3,000 and recorded OT is RM500, the earnings total in this model is RM3,500. The calculator then applies the selected percentage to that total. It does not calculate overtime hours or the correct OT wage rate; you must use the gross OT amount shown by your payroll records.

Why Official PCB Can Differ

PCB is not generally calculated by taking one fixed percentage of that month’s gross pay. The applicable calculation can take account of projected annual remuneration and tax, employee information, qualifying deductions or reliefs, and deductions already made. The precise factors and rules are governed by current Malaysian requirements and the official calculation method.

As a result, two employees with the same basic salary and overtime may have different PCB amounts. A month with unusually high OT or a bonus may also produce a different deduction from a typical month, depending on how the employer’s payroll system handles the payment under current rules. A flat-rate estimate can be useful for budgeting, but should not be used to judge whether a payslip is compliant.

Common Mistakes and Better Alternatives

  • Using net pay: enter gross earnings, not the amount remaining after tax or other deductions.
  • Mixing periods: do not combine annual salary with monthly OT. Convert amounts to the same pay period before using the estimate.
  • Guessing the rate: a percentage entered here is an assumption, not an official PCB rate. A guessed value can make the result misleading.
  • Counting a payment twice: check whether a total-pay figure already includes OT or other earnings before entering them separately.
  • Treating the result as net salary: it subtracts estimated PCB only, not retirement contributions, social security, unpaid leave, advances or other deductions.

For a dependable deduction figure, use the current official LHDN PCB/MTD calculator or calculation method, with complete and accurate employee and pay details. Employers should follow current payroll requirements rather than this simplified estimate. For a personal tax question, consult LHDN guidance or a qualified tax professional.

Frequently Asked Questions

Does overtime pay count for PCB in Malaysia?
Overtime is employment income, but its precise treatment in a particular payroll calculation depends on current rules and the employee’s circumstances. This simplified calculator lets you include OT as entered pay; it does not decide the official taxable amount.

How do I calculate PCB on salary plus OT?
For a rough estimate, add the gross monthly salary and OT, then apply an assumed percentage. That is the method shown here, not the official PCB formula. Use the current LHDN method or employer payroll calculation for an actual deduction.

Is this an official Malaysian PCB calculator?
No. It is a simple percentage-based planning estimate and does not use official tax tables or personal details. It cannot confirm a correct statutory deduction.

Should I include a bonus or commission?
This calculator has a field for other taxable pay, but you should enter an amount only when you know how it should be treated for your estimate. Bonus and commission treatment in official payroll calculations may differ from a flat monthly percentage.

Why is my payslip PCB different from this result?
The estimate applies one user-selected rate to entered monthly pay. Payroll may use annual projections, employee information, eligible reliefs and current official rules, so a difference is expected.

Related

Formula used
in m | Monthly basic salary | RM/month | 3000 | 0
in ot | Monthly overtime pay | RM/month | 500 | 0
in b | Monthly bonus or other taxable pay | RM/month | 0 | 0
in r | Estimated effective deduction rate | % | 5 | 0 | 100
out pcb | Estimated PCB on monthly pay | RM/month | (m + ot + b) * r / 100 | 2
out pay | Pay after estimated PCB | RM/month | m + ot + b - pcb | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →