molecalculator

Moles & Molar Mass

pOH to pH Conversion Calculator and Formula

Calculator No. 01-2499 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Convert pOH to pH by subtracting the pOH value from 14.00 when the solution is at 25 °C: pH = 14.00 − pOH. Enter pOH below to calculate pH and the corresponding hydroxide-ion concentration; the 14.00 relationship is temperature-dependent, not universal.

Formula

At a specified temperature, pH + pOH = pKw, where pKw is the negative base-10 logarithm of water’s ion-product constant. At 25 °C, pKw is approximately 14.00, so:

  • pH = 14.00 − pOH
  • [OH⁻] = 10−pOH mol/L

Here, pH and pOH are dimensionless logarithmic quantities, and [OH⁻] is hydroxide-ion concentration in moles per litre. The calculator uses 14 as the conventional 25 °C value for pKw; its pH output is rounded to two decimal places, and hydroxide concentration is displayed to six decimal places where applicable. A displayed zero for a very small concentration means it is below the chosen display precision, not that the concentration is exactly zero.

Worked Example

With the default pOH of 4:

  1. Calculate pH: pH = 14 − 4 = 10.00.
  2. Calculate hydroxide concentration: [OH⁻] = 10−4 mol/L = 0.0001 mol/L.

The result is pH 10.00 and [OH⁻] = 0.000100 mol/L. The pH value is the direct conversion requested; concentration is an additional way to interpret that pOH.

Assumptions

  • The conversion uses pKw = 14.00, the usual approximation for water at 25 °C.
  • The supplied number is a pOH value, not a hydroxide concentration or a pH reading.
  • The concentration output is the ideal concentration corresponding to the supplied pOH. In real solutions, pH and pOH measurements are linked to ion activities, which can differ from concentrations.
  • This arithmetic does not account for temperature, ionic strength, calibration, or measurement uncertainty.

What pOH and pH Mean

pH and pOH are logarithmic ways to express how acidic or basic an aqueous solution is. In the conventional concentration-based definition, pH = −log10[H⁺] and pOH = −log10[OH⁻], with concentrations expressed relative to the standard concentration of 1 mol/L. Because the scale is logarithmic, changing a value by one unit corresponds to a tenfold change in the associated ion quantity under this simplified definition.

At 25 °C, neutral water has pH 7 and pOH 7. A solution with pOH 4 has a pH near 10 and is basic under those conditions; a solution with pOH 10 has a pH near 4 and is acidic. These examples rely on the same 25 °C approximation. “Neutral” means the hydrogen-ion and hydroxide-ion activities are equal, not that every neutral solution has pH 7 at every temperature.

Why the Number 14 Can Change

The familiar sum of 14 comes from water’s ion product, Kw. In water, hydrogen ions and hydroxide ions are related by Kw = [H⁺][OH⁻] in the ideal concentration treatment. Taking the negative base-10 logarithm gives pH + pOH = pKw. The value of Kw, and therefore pKw, changes with temperature.

Consequently, 14.00 is a useful approximation for ordinary calculations at 25 °C, but it should not be treated as a universal constant. If a reliable pKw value is available for the solution temperature and conditions, use pH = pKw − pOH instead. In concentrated or high-ionic-strength solutions, activity effects also matter: routine pH readings represent an operational measurement and may not equal a value calculated from concentration alone.

How to Use the Conversion

Enter the pOH as a nonnegative number. The calculator subtracts it from 14 and also calculates 10−pOH to show the corresponding ideal hydroxide concentration in mol/L. For example, a pOH of 3.5 gives pH 10.5 at 25 °C, while the hydroxide concentration is about 3.16 × 10−4 mol/L.

Use the pH result as a conversion, not as a substitute for measuring an actual sample. If the input came from a concentration calculation, confirm that the concentration is in mol/L before taking a logarithm. A concentration stated in mmol/L must be divided by 1000 first: 1 mmol/L is 0.001 mol/L. Confusing these units changes the logarithmic result by three pH or pOH units.

Common Errors and Limits

  • Subtracting in the wrong direction: pH is 14 − pOH, not pOH − 14. A pOH of 5 gives pH 9 at 25 °C.
  • Assuming the sum is always 14: it is approximately 14.00 at 25 °C. For other temperatures, use the appropriate pKw.
  • Treating pOH as a concentration: pOH is a logarithmic value. To recover an ideal hydroxide concentration, calculate 10−pOH mol/L.
  • Reading excessive precision into a result: the input may be rounded, and the measurement can have uncertainty. Reporting many decimal places does not make the sample measurement more accurate.
  • Assuming a calculated value replaces a meter: solution composition, temperature, activity effects, and electrode calibration can affect the measured pH.

For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor. For an actual sample, the meter reading is the real check: temperature and ionic strength can shift pH, and a calculation based only on pOH does not capture all sample-specific effects.

Frequently Asked Questions

What is the formula to convert pOH to pH?
Use pH = pKw − pOH. At 25 °C, pKw is approximately 14.00, so the common form is pH = 14.00 − pOH.

What is the pH if pOH is 3?
At 25 °C, pH = 14 − 3 = 11. The solution is basic by this conventional calculation.

Can pH and pOH add up to something other than 14?
Yes. Their sum is pKw, which varies with temperature. The sum is approximately 14.00 at 25 °C, not at every temperature.

How do I convert pOH to hydroxide concentration?
Use [OH⁻] = 10−pOH mol/L. For pOH 4, this gives 0.0001 mol/L, or 1 × 10−4 mol/L.

Can pH or pOH be negative?
They can be negative in sufficiently concentrated solutions under the logarithmic activity-based definition. This calculator accepts nonnegative pOH values and is intended for common introductory calculations, so it does not cover that edge case.

Related

Formula used
in poh | pOH | - | 4 | 0
out ph | pH | 14 - poh | 2
out oh | [OH⁻] | mol/L | 10 ^ (-poh) | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →