molecalculator

Moles & Molar Mass

Pressure Conversion Calculator: PSI to Other Units

Calculator No. 01-11943 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This pressure conversion calculator converts pounds per square inch (psi) to other common pressure units, including bar, kilopascal (kPa), atmosphere (atm), and millimeters of mercury (mmHg). You enter a value in psi and choose the target unit; the calculator returns the equivalent pressure in that unit. It also shows the conversion factor used, so you can verify the result and learn the relationship between units.

Formula

The conversion uses a simple multiplication: pressure in target unit = pressure in psi × conversion factor. The conversion factors are exact (or defined) values:

  • psi to bar: multiply by 0.0689476 (since 1 psi = 0.0689476 bar)
  • psi to kPa: multiply by 6.89476 (since 1 psi = 6.89476 kPa)
  • psi to atm: multiply by 0.0680460 (since 1 psi = 0.0680460 atm)
  • psi to mmHg: multiply by 51.7149 (since 1 psi = 51.7149 mmHg)

Each factor is derived from the definition of psi (pound-force per square inch) and the standard definitions of the other units. For example, 1 atm is exactly 101325 Pa, and 1 psi is exactly 6894.76 Pa, so 1 psi = 6894.76 / 101325 atm = 0.0680460 atm.

Worked Example

Using the default value of 14.6959 psi (which is exactly 1 standard atmosphere), let’s convert to bar:

  1. Start with the input: 14.6959 psi.
  2. Select the target unit: bar.
  3. Apply the conversion factor: 14.6959 × 0.0689476 = 1.01325 bar.
  4. Rounded to 4 decimal places: 1.0133 bar.

This matches the calculator output for the default values. In fact, 14.6959 psi is defined as 1 atm, and 1 atm is exactly 1.01325 bar, so the result is exact when using the full precision.

Assumptions

  • The conversion factors are exact definitions (e.g., 1 psi = 6894.76 Pa exactly).
  • No temperature or altitude corrections are applied; pressure is treated as a scalar quantity.
  • The calculator assumes you are converting a gauge pressure or an absolute pressure; the same factor applies to both.

Why Convert PSI?

PSI (pounds per square inch) is the standard unit of pressure in the United States and is commonly used in tire pressure, hydraulic systems, and scuba tanks. However, most of the world uses the metric system, where pressure is measured in pascals (Pa), kilopascals (kPa), or bars. If you are reading a spec sheet from a European manufacturer, or using a gauge calibrated in bar, you need to convert psi values to understand them. This calculator makes that conversion quick and error-free.

How to Use the Calculator

Enter the pressure value in psi in the first field. Then select the unit you want to convert to from the drop-down menu. The calculator immediately shows the converted value in the output field. For example, to convert 32 psi (a typical car tire pressure) to kPa, enter 32 and select kPa; the result is 32 × 6.89476 = 220.63 kPa. To convert to bar, select bar; you get 32 × 0.0689476 = 2.2063 bar. The calculator also shows the conversion factor used, so you can double-check the math.

Common Mistakes and Misconceptions

A frequent error is confusing gauge pressure with absolute pressure. Most tire gauges read gauge pressure (pressure above atmospheric), while many scientific calculations require absolute pressure (gauge + atmospheric). This calculator converts the number you enter, whether it is gauge or absolute; you must decide which one you have. Another mistake is using the wrong conversion factor. For example, 1 psi equals 6.89476 kPa, but some people mistakenly use 6.895 or round to 6.9, leading to small errors. In precision work, use the exact factors. Also, note that psi is a pound-force per square inch, not pound-mass; the conversion factor already accounts for the gravitational constant, so you do not need to multiply by g.

Practical Applications

Pressure conversions are needed in many real-world scenarios:

  • Tire pressure: Car manuals often list pressures in psi, but many air pumps in Europe display bar. Convert 32 psi to 2.2 bar.
  • Scuba diving: Tank pressures are often given in psi (e.g., 3000 psi), but dive computers may show bar. 3000 psi is about 207 bar.
  • HVAC systems: Refrigerant pressures may be specified in psi or kPa. A typical R-410A system operates around 120 psi, which is 827 kPa.
  • Laboratory work: Gas pressures in chemistry experiments are often measured in mmHg or atm. Converting 760 mmHg to psi gives 14.6959 psi, which is 1 atm.

Limits of the Calculator

This calculator is for unit conversion only. It does not account for temperature effects on pressure (e.g., ideal gas law), nor does it convert between absolute and gauge pressure. If you need to convert a gauge reading to absolute, add the local atmospheric pressure (typically 14.6959 psi at sea level). Also, the calculator assumes standard gravity; the definition of psi uses standard gravity, so it is consistent. For extremely high pressures (above 100,000 psi), the conversion factors remain valid, but the physical behavior of materials may change; this is a conversion tool, not a physics simulator.

Frequently Asked Questions

How many kPa are in 1 psi?

1 psi is exactly 6.89476 kPa. This is because 1 psi is defined as 6894.76 pascals, and 1 kPa is 1000 pascals. So multiply psi by 6.89476 to get kPa.

What is the difference between psi and psig?

PSI stands for pounds per square inch, and it can refer to absolute pressure (psia) or gauge pressure (psig). Psig is the pressure measured by a gauge, which is the pressure above atmospheric pressure. Psia is the total pressure including atmospheric. To convert psig to psia, add the local atmospheric pressure (about 14.7 psi at sea level). This calculator does not add atmospheric; it simply converts the number you enter.

How do I convert bar to psi?

To convert bar to psi, divide the bar value by 0.0689476, or multiply by 14.5038. For example, 2.5 bar is 2.5 × 14.5038 = 36.26 psi. This calculator works the other way (psi to bar), but you can use the reciprocal factor.

Is 1 atm exactly 14.6959 psi?

Yes, 1 standard atmosphere is defined as 101325 pascals, and 1 psi is 6894.76 pascals, so 1 atm = 101325 / 6894.76 = 14.6959488… psi, which rounds to 14.6959 psi. This is why the default value is set to that number.

Why are there so many pressure units?

Pressure units arose from different measurement traditions. PSI comes from the imperial system, bar from meteorology, kPa from the metric system, mmHg from the height of a mercury column in a barometer, and atm from the average sea-level pressure. Each field tends to use the unit that is most convenient for its typical pressure range. Conversion is necessary when crossing fields or regions.

Related

Formula used
in psi | Pressure in psi | psi | 14.6959 | 0
sel unit | Convert to | bar=1, kPa=2, atm=3, mmHg=4
out result | Converted pressure | - | psi * (1 if unit==1 else 0.0689476 if unit==2 else 6.89476 if unit==3 else 0.0680460 if unit==4 else 51.7149) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →