Pressure divided by density has the SI unit of square metres per square second, written m²/s². It is also dimensionally equivalent to energy per unit mass, J/kg, and commonly appears in fluid mechanics as a specific-energy term.
Formula
The calculation is pressure divided by density:
q = p / ρ
- q is pressure divided by density, in m²/s².
- p is pressure, in pascals (Pa), where 1 Pa = 1 N/m².
- ρ (rho) is mass density, in kilograms per cubic metre (kg/m³).
The equivalent unit follows from the pascal’s base units: (N/m²)/(kg/m³) = N·m/kg. Since 1 N·m = 1 J, this is J/kg. In base SI units, 1 J/kg = 1 m²/s². The calculator expects pressure in Pa and density in kg/m³; convert other units before using the relationship.
Worked Example
Using the calculator’s default pressure of 101325 Pa and density of 1000 kg/m³:
- Write the relationship: q = p / ρ.
- Substitute the inputs: q = 101325 Pa / 1000 kg/m³.
- Divide: q = 101.325 m²/s².
Rounded to the calculator’s four decimal places, the result is 101.3250 m²/s². The equivalent specific energy is 101.3250 J/kg. The equality is dimensional, not a claim that the value is a total energy: it is energy per unit mass.
Assumptions
- Pressure is expressed in pascals and density in kg/m³.
- Density is positive; zero or negative density is not physically suitable for this division.
- The calculator performs a unit conversion relationship only. It does not assume a particular fluid, flow speed, or pressure reference.
Why the Units Reduce to m²/s²
Pressure measures force per area, while density measures mass per volume. Dividing one by the other cancels the mass and leaves length squared per time squared:
(N/m²) ÷ (kg/m³) = (N·m)/kg = J/kg = m²/s².
This unit can look like a velocity squared because velocity has units of m/s. That resemblance is useful in fluid mechanics, where pressure-related energy terms are sometimes expressed as a velocity head. But pressure divided by density is not itself a velocity. To obtain a speed from an energy-per-mass quantity, a specific physical relationship is needed. For example, under a suitable idealized energy balance, a term may take the form v²/2; solving that term for v involves a square root and assumptions about the flow.
It is also not the same as pressure divided by mass. Density is mass per volume, so the volume factor matters. Confusing density with mass changes the dimensions and gives a different physical quantity.
Absolute and Gauge Pressure
Pressure may be reported as absolute pressure or gauge pressure. Absolute pressure is measured relative to a perfect vacuum. Gauge pressure is measured relative to the surrounding atmospheric pressure. Both use pascals, but they are not interchangeable in every calculation.
For calculations involving a pressure difference, such as a difference between two points, gauge values can be useful if both use the same reference. For thermodynamic state relations and many energy calculations, absolute pressure may be required. Decide which pressure the underlying equation calls for before dividing by density. The calculator simply divides the number entered; it cannot infer whether a gauge or absolute value is appropriate.
Using Other Units Correctly
The units must be compatible with the formula. A frequent mistake is to enter kilopascals as if they were pascals: 1 kPa = 1000 Pa. Density conversions matter just as much: 1 g/cm³ = 1000 kg/m³. For example, a density entered as 1 instead of 1000 when the intended unit is kg/m³ makes the calculated quotient one thousand times too large.
- Convert kPa to Pa by multiplying by 1000.
- Convert bar to Pa by multiplying by 100000.
- Convert g/cm³ to kg/m³ by multiplying by 1000.
- Convert g/L to kg/m³ by multiplying by 1; the numerical values are equal.
Keep track of whether a source gives density in kg/L, g/mL, or another unit. Do not rely only on the number: write the unit beside each value and convert it explicitly. For changing conditions, such as a gas at different temperatures or pressures, use the density appropriate to those conditions.
Where This Quantity Is Useful
Pressure divided by density occurs in fluid mechanics and engineering equations that compare pressure energy with other forms of energy per unit mass. In Bernoulli’s equation for steady, incompressible flow along a streamline, pressure divided by density appears alongside kinetic energy per mass and gravitational potential energy per mass. In that setting, the pressure term is p/ρ, and each term has units of J/kg or m²/s².
The quotient can also help check the dimensions of a formula. If a derivation combines pressure and density and is intended to represent specific energy, m²/s² is the expected unit. Dimensional agreement is a useful check, but it does not prove that the physical assumptions of the equation are satisfied.
Pressure divided by density alone does not determine flow speed, pressure drop, or total energy. Those require additional information and a suitable model—for example, elevation change, velocity, losses, boundary conditions, or whether the fluid can be treated as incompressible. A numerical result should therefore be interpreted in the context of the equation in which it is used.
Frequently Asked Questions
What is pressure divided by density called?
It is generally described as pressure per unit density or a pressure-related specific-energy term. In fluid mechanics it is often written p/ρ; the exact name depends on the equation and context.
Is pressure divided by density a velocity?
No. Its unit is m²/s², which is velocity squared, not velocity. A speed can be derived only when an appropriate physical equation relates the quotient to speed.
Is Pa divided by kg/m³ equal to J/kg?
Yes. Pa/(kg/m³) reduces to N·m/kg, which is J/kg. Since a joule per kilogram is also m²/s², all three units are equivalent.
Should I use gauge or absolute pressure?
Use the pressure reference required by the equation. Gauge pressure is relative to local atmosphere; absolute pressure is relative to a vacuum. They have the same units but different numerical values.
What units should density use?
For a result directly in m²/s², use kg/m³ together with pressure in Pa. Convert values from units such as g/cm³ or g/mL before calculating.
Related
Formula used
in p | Pressure | Pa | 101325 | 0 in rho | Density | kg/m³ | 1000 | 0.001 out q | Pressure divided by density | m²/s² | p / rho | 4 out j | Equivalent specific energy | J/kg | q | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Heat Gain and Loss Calculator for Calorimetry4,184.00 J
- Heat Output Calculator kW: Estimate Thermal Power1.395 kW
- Heat Calculation: Formula, Example, and Limits41,840 J
- Heat Energy Released Formula and Worked Example23,012 J
- Heat Transfer Equation for q: Formula and Examples41,840 J
- Heat Rate Formula: Calculate Energy per Unit Time166.67 W