This calculator estimates the vapor pressure of propane at a given temperature using the Antoine equation, which is accurate for the typical operating range of propane systems. You enter the temperature in degrees Celsius (or Fahrenheit, converted internally), and you get the vapor pressure in kilopascals (kPa) and pounds per square inch gauge (psig). This is the pressure you would expect in a closed propane tank at that temperature, assuming no other gases are present.
Formula
The vapor pressure of a pure substance is often modeled by the Antoine equation, which is a simplified version of the Clausius–Clapeyron relation. For propane, the Antoine constants (with temperature in K and pressure in kPa) are:
log10(Psat / kPa) = A – B / (T – C)
where:
- Psat = vapor pressure (absolute) in kPa
- T = temperature in Kelvin (K) = t(°C) + 273.15
- A = 4.53678 (dimensionless)
- B = 1149.36 K
- C = 24.906 K
The calculator uses these constants, which are valid from about –40°C to 100°C (the normal boiling point of propane is –42.1°C, and the critical point is 96.7°C). The gauge pressure is calculated by subtracting standard atmospheric pressure (101.325 kPa = 14.6959 psi) from the absolute pressure.
Worked Example
Using the default temperature of 20°C:
- Convert to Kelvin: T = 20 + 273.15 = 293.15 K
- Compute the exponent: A – B/(T – C) = 4.53678 – 1149.36/(293.15 – 24.906) = 4.53678 – 1149.36/268.244 ≈ 4.53678 – 4.28455 = 0.25223
- Take 10 to that power: 100.25223 ≈ 1.787 (dimensionless)
- Multiply by 100 to get kPa: 1.787 × 100 = 178.7 kPa (absolute)
- Convert to psig: (178.7 / 6.89476) – 14.6959 ≈ 25.92 – 14.70 = 11.2 psig
The calculator shows 178.7 kPa and 11.2 psig, matching the example.
Assumptions
- The propane is pure (no air or other gases mixed in).
- The system is at equilibrium: liquid propane is present, and the vapor is saturated.
- The Antoine equation is valid over the temperature range –40°C to 100°C; outside this range, the estimate may be inaccurate.
- The pressure is absolute; gauge pressure is calculated relative to standard atmospheric pressure at sea level.
How to Use This Calculator
Enter the temperature of the propane tank or the ambient temperature if the tank has been sitting long enough to reach that temperature. The calculator works for both liquid and vapor phases as long as liquid propane is present. For example, at 0°C, the vapor pressure is about 380 kPa (55 psi absolute, 40 psig); at 40°C, it rises to about 1370 kPa (199 psi absolute, 184 psig).
This is useful for:
- Checking whether a propane tank is within its design pressure rating.
- Estimating how much propane remains in a tank by measuring pressure (but note: as long as liquid is present, pressure is constant at a given temperature; only when the tank is nearly empty does pressure drop).
- Designing or troubleshooting propane vaporizer systems.
Common Mistakes and Misconceptions
One common mistake is confusing absolute pressure with gauge pressure. A typical propane tank at 20°C shows about 11 psig on a gauge, but the absolute pressure is about 26 psi. This matters when using the ideal gas law or comparing with published data.
Another misconception is that vapor pressure depends on the amount of liquid in the tank. As long as any liquid propane is present, the vapor pressure is determined solely by temperature. The tank pressure will not drop until the last drop of liquid evaporates.
Also, the Antoine equation is not valid above the critical temperature (96.7°C for propane). Above that, propane cannot exist as a liquid, and the concept of vapor pressure changes. The calculator’s input is limited to 50°C to stay well below the critical point.
Choosing the Right Constants
Different sources give slightly different Antoine constants for propane. The constants used here are from the NIST Chemistry WebBook (A=4.53678, B=1149.36, C=24.906, with pressure in kPa and temperature in K). If you need extreme accuracy, you may want to use a more comprehensive equation of state, such as the Peng–Robinson or Soave–Redlich–Kwong, but for most practical purposes the Antoine equation is sufficient.
Always check the units: some tables use mmHg or bar. Convert to kPa before using these constants. For example, to convert from mmHg to kPa, multiply by 0.133322.
Safety and Practical Limits
Propane is a flammable gas. The vapor pressure of propane in a tank is not a safety hazard by itself, but the tank is designed to withstand it. At 50°C, the vapor pressure is about 1900 kPa (275 psig), which is still below the typical relief valve setting of 250 psig? Actually, many propane tanks have relief valves set at 250 psig (about 1724 kPa), so at 50°C the pressure could approach that limit. Always follow the manufacturer’s guidelines and local regulations for propane storage. This calculator is for educational and planning purposes only; for actual engineering, consult the appropriate standards.
Also, remember that the pressure inside a tank is the vapor pressure only if the tank contains both liquid and vapor. If the tank is overfilled (no vapor space), the pressure can rise much faster with temperature due to liquid expansion, which is dangerous. Never overfill a propane tank.
Frequently Asked Questions
Why does my propane tank pressure stay the same even when it’s half empty?
Because as long as there is liquid propane in the tank, the vapor pressure is determined by temperature alone. The liquid evaporates to fill the vapor space, maintaining the saturation pressure. Only when the last liquid evaporates (tank nearly empty) does the pressure start to drop.
What is the vapor pressure of propane at room temperature (25°C)?
Using the calculator, at 25°C the vapor pressure is about 214 kPa (31 psia, 16.3 psig). This is why a propane tank feels cold when you use it: the evaporation absorbs heat, lowering the tank temperature and thus the pressure.
Can I use this calculator for butane or other gases?
No, each gas has its own Antoine constants. For butane, the constants are different (A=3.93217, B=935.773, C=238.789, in kPa and K), so you would need a different calculator. This one is specific to propane.
Why does the calculator show a negative gauge pressure at very low temperatures?
At temperatures below about –42°C, the vapor pressure of propane is less than atmospheric pressure. For example, at –50°C, the absolute pressure is about 60 kPa, which is below 101.3 kPa, so the gauge pressure is negative (about –6 psig). This means the tank would be under a partial vacuum if it were sealed and cooled to that temperature, which is why propane tanks are not typically used in such extreme cold without special equipment.
How accurate is the Antoine equation for propane?
Within the range –40°C to 100°C, the Antoine equation typically gives pressures within 1–2% of experimental values. For most practical purposes (e.g., checking tank pressure, sizing vaporizers), this is accurate enough. For precise work, use a real gas equation of state or experimental data.
What is the difference between vapor pressure and partial pressure?
Vapor pressure is the pressure exerted by a pure vapor in equilibrium with its liquid (or solid) at a given temperature. Partial pressure is the contribution of one gas in a mixture. In a propane tank, the vapor space is essentially pure propane (if no air is present), so the total pressure equals the vapor pressure. If air is present, the total pressure would be the sum of the air’s partial pressure and the propane’s vapor pressure.
Related
Formula used
in t | Temperature | °C | 20 | -40 | 50 out p | Vapor pressure (absolute) | kPa | 10^(4.53678 - 1149.36 / (t + 273.15 - 24.906)) * 100 | 1 out psig | Vapor pressure (gauge) | psig | (p / 6.89476) - 14.6959 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- PCR Primer Tm Calculation: How to Compute It
- Molecules to Moles Conversion Steps1.0000 mol
- Mean Rate of Reaction: How to Calculate It0.0050 mol/s
- mRNA vs Mature mRNA: Key Differences4,750
- Mass Fraction to Mole Fraction Calculator0.5195 fraction
- Savings Bonds Series E Calculator: Value and Interest280.68 USD