This calculator works out the energy released in a single nuclear decay event (in megaelectronvolts, MeV, and joules) from the mass difference between the parent and daughter nuclides plus the emitted particle. You enter the atomic masses of the parent and the decay products, and it returns the Q-value — the kinetic energy shared by the decay products. The Q-value is the fundamental quantity that tells you whether a decay is energetically possible and how much energy is available.
Formula
The energy released in radioactive decay is given by the mass–energy equivalence relation:
Q = (mparent − mdaughter − mparticle) × c²
- Q = energy released (MeV or J)
- mparent = atomic mass of the parent nuclide (u)
- mdaughter = atomic mass of the daughter nuclide (u)
- mparticle = atomic mass of the emitted particle (u; for β⁻ decay use the electron mass, for β⁺ decay use the positron mass, for α decay use the helium-4 mass)
- c² = 931.49410242 MeV/u (conversion from atomic mass units to energy)
The conversion factor comes from c² = (299,792,458 m/s)² and 1 u = 1.66053906660 × 10⁻²⁷ kg. In joules, 1 u × c² = 1.49241808560 × 10⁻¹⁰ J, which is exactly 931.49410242 MeV.
Worked Example
Using the default values for the alpha decay of uranium-238:
- Parent mass (²³⁸U): 238.050788 u
- Daughter mass (²³⁴Th): 234.043601 u
- Alpha particle mass (⁴He): 4.002603 u
- Mass difference = 238.050788 − 234.043601 − 4.002603 = 0.004584 u
- Q in MeV = 0.004584 × 931.49410242 = 4.270 MeV
- Q in joules = 0.004584 × 1.49241808560e-10 = 6.841e-13 J
The calculator shows Q = 4.270 MeV (rounded to 4 decimals) and 6.841e-13 J. This is the total kinetic energy carried away by the alpha particle and the recoiling thorium nucleus.
Assumptions
- Atomic masses are used; these include the masses of all electrons. For alpha and beta decays, the electron masses cancel correctly when you use atomic masses for the parent and daughter (because the daughter atom has one fewer or one more electron).
- The parent nucleus is assumed at rest (no initial kinetic energy).
- Neutrino mass is neglected (it is tiny, < 1 eV).
- For beta decay, the Q-value is the maximum energy available; the neutrino carries away part of it, so the electron energy is a continuous spectrum up to Q.
What the Q-Value Tells You
The Q-value is the energy released in a single decay. It is always positive for a spontaneous decay; if you calculate a negative number, that decay cannot happen spontaneously. The Q-value is used to:
- Determine whether a nuclide is radioactive (positive Q) or stable (negative Q for all possible decay modes).
- Calculate the kinetic energy of emitted alpha particles (the alpha particle gets most of the energy, but the daughter nucleus recoils with a small fraction).
- Design radiation shielding – higher Q means more energetic particles that need thicker shielding.
- Compare different decay modes – a nuclide may have several possible decays; the one with the highest Q is usually favored, but other factors (like parity and angular momentum) also matter.
For alpha decay, the alpha particle energy is roughly Q × (mass of daughter / (mass of daughter + mass of alpha)). For the example above, the alpha energy ≈ 4.270 × (234.044 / 238.047) ≈ 4.198 MeV, which matches the measured 4.198 MeV for ²³⁸U.
Common Mistakes and Misconceptions
One frequent error is using nuclear masses instead of atomic masses. Atomic masses are easier to find and give the same Q-value for alpha decay because the electron masses cancel. For beta-minus decay, using atomic masses works directly; for beta-plus decay, you must subtract 2 × electron mass (1.022 MeV) from the Q-value because the positron is created and the daughter atom has one extra electron.
Another mistake is confusing the Q-value with the kinetic energy of one particle. In beta decay, the electron energy is not equal to Q; it is a spectrum from 0 to Q because the neutrino carries variable energy. In alpha decay, the alpha particle energy is slightly less than Q because the daughter nucleus recoils.
Students often forget that the mass of the emitted particle must be subtracted. For alpha decay, that is the helium-4 atomic mass (4.002603 u), not the alpha particle mass (4.001506 u) – the difference is the two electrons, which cancel with the atomic masses of parent and daughter.
Why Mass Defect Matters
The Q-value is a direct measure of the nuclear binding energy difference between the parent and the products. In a decay, the total mass decreases; that lost mass becomes kinetic energy. This is the same principle that powers nuclear reactors and stars – the mass defect is the source of energy. For example, the Q-value of the ²³⁸U alpha decay is about 4.27 MeV, which is tiny on a macroscopic scale (about 6.8 × 10⁻¹³ J per atom), but a mole of uranium atoms decaying would release about 4.1 × 10¹¹ J – enough to boil about 1.4 million liters of water.
Understanding Q-values helps in nuclear physics research, nuclear medicine (where radionuclides are chosen for their decay energy), and in designing nuclear batteries or radioisotope thermoelectric generators (RTGs) used in spacecraft. The decay energy is converted into heat and then electricity.
How to Use the Calculator
Enter the atomic masses in unified atomic mass units (u). You can find these in standard tables (e.g., NIST or IAEA). For the particle mass:
- Alpha decay: use 4.002603 u (helium-4 atom).
- Beta-minus decay: use 0.000548579909 u (electron mass).
- Beta-plus decay: use 0.000548579909 u (positron mass) – but note the Q-value will be lower by 1.022 MeV because the daughter atom has an extra electron; the calculator does not add that correction automatically, so you must subtract 1.022 MeV from the result for beta-plus.
- Gamma decay: use 0 for the particle mass, but the Q-value is simply the energy of the gamma photon.
The calculator gives the Q-value in MeV and joules. For a quick check, remember that 1 u of mass difference corresponds to 931.5 MeV.
Frequently Asked Questions
What is the difference between Q-value and decay energy?
They are the same thing. The Q-value is the total energy released in a nuclear decay, equal to the mass difference times c². It is often called the decay energy or disintegration energy.
Why is the alpha particle energy less than the Q-value?
Because of conservation of momentum. The alpha particle and the daughter nucleus fly apart in opposite directions. The daughter nucleus, being much heavier, carries away only a small fraction of the kinetic energy. The alpha particle gets about (m_daughter / (m_daughter + m_alpha)) × Q, which is close to Q but not exactly Q.
Can a decay have a negative Q-value?
No. If the calculated Q-value is negative, that decay is energetically impossible (it would require adding energy). Such a nuclide is stable against that particular decay mode. For example, ²³⁸U cannot beta decay because the Q would be negative; it decays by alpha instead.
How do I find the atomic masses?
Use a reliable source like the NIST Atomic Mass Evaluation or the IAEA Nuclear Data Services. Many periodic tables also list atomic masses, but they are usually the average over isotopes; for decay calculations you need the specific isotope mass. For common isotopes, you can find them in textbooks or online databases.
Does the Q-value depend on temperature or pressure?
No. The Q-value is a property of the nuclear energy levels and is essentially constant. It does not change with external conditions because nuclear forces are not affected by temperature or pressure in any significant way. However, the decay rate (half-life) can be slightly affected by extreme conditions, but the energy released per decay remains the same.
Related
Formula used
in m_parent | Parent mass | u | 238.050788 | 0 in m_daughter | Daughter mass | u | 234.043601 | 0 in m_particle | Emitted particle mass | u | 4.002603 | 0 out q_mev | Q-value (MeV) | MeV | (m_parent - m_daughter - m_particle) * 931.49410242 | 4 out q_j | Q-value (joules) | J | (m_parent - m_daughter - m_particle) * 1.49241808560e-10 | 12
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works