RCF is expressed in multiples of g, so an RCF of 1,000 × g means a centrifugal acceleration 1,000 times standard Earth gravity. This calculator converts between relative centrifugal force (RCF) and revolutions per minute (RPM) using the rotor radius; enter the known values to find the missing quantity.
Formula
RCF = 1.118 × r × (RPM / 1,000)2, where r is the rotor radius in centimetres and RPM is the rotational speed in revolutions per minute. The result is a dimensionless multiple of standard gravity, written as × g. The coefficient 1.118 incorporates the unit conversions and standard gravity, 9.80665 m/s². To express the same acceleration in metres per second squared, multiply RCF by 9.80665 m/s².
The equation comes from centripetal acceleration, a = ω²r, divided by standard gravity, where ω is angular speed in radians per second and r is radius in metres. The calculator’s second result therefore uses a = RCF × 9.80665 m/s². Its radius input is in centimetres, while the RPM input is revolutions per minute.
Worked Example
Using the default inputs—radius 10 cm and speed 3,000 rpm:
- Divide the speed by 1,000: 3,000 / 1,000 = 3.
- Square that value: 32 = 9.
- Calculate RCF: 1.118 × 10 × 9 = 100.62 × g.
- Convert to acceleration: 100.62 × 9.80665 = 986.588223 m/s², or 986.59 m/s² to two decimal places.
The calculator displays an RCF of 100.62 × g and a corresponding acceleration of 986.59 m/s².
Assumptions
- The stated radius is the distance from the axis of rotation to the point in the sample whose RCF is wanted.
- The entered RPM is the rotor’s actual operating speed.
- The calculation treats rotation as steady and uses standard gravity, 9.80665 m/s², as the reference.
- The result is a kinematic acceleration estimate; it does not predict how a particular sample separates.
What RCF and g Mean
RCF means relative centrifugal force. In centrifuge work, it describes the acceleration experienced by material as a multiple of standard gravitational acceleration. The symbol g in an expression such as 5,000 × g refers to that acceleration reference, not to grams, and not to the mass of the sample.
For example, 500 × g means an acceleration 500 times standard gravity: 500 × 9.80665 = 4,903.325 m/s². It does not mean that the sample has 500 grams of force or weighs 500 times more in every practical sense. RCF is a convenient way to compare the acceleration associated with a centrifuge setting.
Why Rotor Radius Matters
RCF depends on both rotational speed and radius. At the same RPM, a sample farther from the axis travels in a larger circle and experiences greater centripetal acceleration. At a fixed radius, acceleration rises with the square of RPM: doubling the speed produces four times the RCF, not twice as much.
That squared relationship makes speed errors consequential. If a rotor is operated at 3,000 rpm rather than 2,000 rpm, the speed ratio is 1.5 and the acceleration ratio is 1.5² = 2.25, assuming the radius is unchanged. Always use the rotor’s allowed speed and the specified operating conditions; this arithmetic does not establish whether a rotor or sample is safe at a particular setting.
Radius is not necessarily the rotor’s overall outside radius. For a sample in a tube, the relevant radius changes along the tube. A maximum RCF is commonly calculated at the sample position farthest from the rotation axis, while an average RCF uses a representative radius. Use the convention and radius definition specified by the equipment documentation or laboratory method.
RCF Versus RPM
RPM states how fast the rotor turns. RCF states the acceleration produced at a particular radius. RPM alone cannot determine RCF because different rotors can have different radii. Conversely, one RCF target can correspond to different RPM settings on different rotors.
To find the RPM for a desired RCF, rearrange the equation:
RPM = 1,000 × √(RCF / (1.118 × r)), with r in centimetres.
For instance, a target of 1,000 × g at a radius of 10 cm corresponds to approximately 2,991 rpm. This is a mathematical conversion, not a recommendation to run a rotor at that speed. The rotor’s rated maximum speed and applicable instructions take precedence.
How to Choose the Radius and Avoid Errors
- Use centimetres: The calculator expects radius in cm. Entering 0.1 for a 10 cm radius by mistake changes the answer by a factor of 100.
- Use actual RPM: Do not enter a speed in revolutions per second or a setting from a different rotor without converting or checking it.
- Identify the sample position: Check whether the required value is at the sample’s top, midpoint, bottom, or another defined location. A swinging bucket changes orientation as it rotates, so use the radius convention supplied for that rotor.
- Keep units consistent: If calculating by the underlying equation, convert radius to metres and RPM to radians per second before using a = ω²r. The calculator’s shortcut already accounts for the cm and rpm conversions.
- Round only at the end: The displayed value is rounded to two decimal places. Keep more precision in intermediate calculations when comparing settings.
A calculator can convert a specified radius and speed, but it cannot identify the correct radius from a rotor’s model or confirm an instrument setting. Consult the relevant rotor documentation and laboratory procedure for those details. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
Is RCF the same as g?
RCF is measured as a multiple of standard gravity, so 1 × g corresponds to an RCF of 1 and 1,000 × g corresponds to an RCF of 1,000. The terms are related, but g is the reference acceleration while RCF is the ratio to that reference.
Does 1,000 × g mean 1,000 grams?
No. Here g means standard gravitational acceleration, not grams. The notation describes acceleration, not sample mass.
Can the same RPM produce different RCF values?
Yes. RCF also depends on radius. At the same speed, a larger radius gives a larger RCF.
How do I convert RCF to RPM?
Use RPM = 1,000 × √(RCF / (1.118 × radius in cm)). Confirm that the radius definition matches the point in the sample for which the RCF target applies.
Why does a centrifuge show RPM instead of RCF?
Some controls display rotational speed, while the required acceleration depends on the installed rotor’s radius. Convert using the correct radius, or use the instrument’s RCF setting if available and appropriate.
Related
Formula used
in r | Rotor radius | cm | 10 | 0 in rpm | Rotor speed | rpm | 3000 | 0 out rcf | Relative centrifugal force | × g | 1.118 * r * (rpm / 1000)^2 | 2 out accel | Centrifugal acceleration | m/s² | rcf * 9.80665 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %